From: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> Add support for Sound card and related codec(via i2c1) nodes on Engicam Is.IoT MX6UL variant module boards. Cc: Shawn Guo <shawnguo@xxxxxxxxxx> Cc: Matteo Lisi <matteo.lisi@xxxxxxxxxxx> Cc: Michael Trimarchi <michael@xxxxxxxxxxxxxxxxxxxx> Signed-off-by: Jagan Teki <jagan@xxxxxxxxxxxxxxxxxxxx> --- Changes for v3: - Replace fsl,imx-audio-sgtl5000 and use simple-audio-card Changes for v2: - Use proper [label:] node-name[@unit-address] for codec - Remove incorrect codec property 'wlf,shared-lrclk' - Remove 'gpr' from sound card node arch/arm/boot/dts/imx6ul-isiot-common.dtsi | 10 +++++++ arch/arm/boot/dts/imx6ul-isiot.dtsi | 44 ++++++++++++++++++++++++++++++ 2 files changed, 54 insertions(+) diff --git a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi index 2beaab6..d456080 100644 --- a/arch/arm/boot/dts/imx6ul-isiot-common.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot-common.dtsi @@ -41,6 +41,16 @@ */ &i2c1 { + sgtl5000: codec@a { + compatible = "fsl,sgtl5000"; + reg = <0x0a>; + clocks = <&clks IMX6UL_CLK_OSC>; + clock-names = "mclk"; + VDDA-supply = <®_3p3v>; + VDDIO-supply = <®_3p3v>; + VDDD-supply = <®_1p8v>; + }; + stmpe811: gpio-expander@44 { compatible = "st,stmpe811"; reg = <0x44>; diff --git a/arch/arm/boot/dts/imx6ul-isiot.dtsi b/arch/arm/boot/dts/imx6ul-isiot.dtsi index ea30380..7e947e5 100644 --- a/arch/arm/boot/dts/imx6ul-isiot.dtsi +++ b/arch/arm/boot/dts/imx6ul-isiot.dtsi @@ -69,6 +69,50 @@ 100>; default-brightness-level = <100>; }; + + reg_1p8v: regulator-1p8v { + compatible = "regulator-fixed"; + regulator-name = "1P8V"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + }; + + reg_3p3v: regulator-3p3v { + compatible = "regulator-fixed"; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "imx6ul-isiot-sgtl5000"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + + simple-audio-card,cpu { + sound-dai = <&sai2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&sgtl5000>; + clocks = <&clks IMX6UL_CLK_SAI2>; + }; + }; }; &i2c1 { -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html