Re: [PATCH] [media] imx: csi: retain current field order and colorimetry setting as default

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 04/06/2017 04:54 PM, Philipp Zabel wrote:
> On Thu, 2017-04-06 at 16:20 +0200, Hans Verkuil wrote:
>> On 04/06/2017 03:55 PM, Philipp Zabel wrote:
>>> If the the field order is set to ANY in set_fmt, choose the currently
>>> set field order. If the colorspace is set to DEFAULT, choose the current
>>> colorspace.  If any of xfer_func, ycbcr_enc or quantization are set to
>>> DEFAULT, either choose the current setting, or the default setting for the
>>> new colorspace, if non-DEFAULT colorspace was given.
>>>
>>> This allows to let field order and colorimetry settings be propagated
>>> from upstream by calling media-ctl on the upstream entity source pad,
>>> and then call media-ctl on the sink pad to manually set the input frame
>>> interval, without changing the already set field order and colorimetry
>>> information.
>>>
>>> Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
>>> ---
>>> This is based on imx-media-staging-md-v14, and it is supposed to allow
>>> configuring the pipeline with media-ctl like this:
>>>
>>> 1) media-ctl --set-v4l2 "'tc358743 1-000f':0[fmt:UYVY8_1X16/1920x1080]"
>>> 2) media-ctl --set-v4l2 "'imx6-mipi-csi2':1[fmt:UYVY8_1X16/1920x108]"
>>> 3) media-ctl --set-v4l2 "'ipu1_csi0_mux':2[fmt:UYVY8_1X16/1920x1080]"
>>> 4) media-ctl --set-v4l2 "'ipu1_csi0':0[fmt:UYVY8_1X16/1920x1080@1/60]"
>>> 5) media-ctl --set-v4l2 "'ipu1_csi0':2[fmt:AYUV32/1920x1080@1/30]"
>>>
>>> Without having step 4) overwrite the colorspace and field order set on
>>> 'ipu1_csi0':0 by the propagation in step 3).
>>> ---
>>>  drivers/staging/media/imx/imx-media-csi.c | 34 +++++++++++++++++++++++++++++++
>>>  1 file changed, 34 insertions(+)
>>>
>>> diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
>>> index 64dc454f6b371..d94ce1de2bf05 100644
>>> --- a/drivers/staging/media/imx/imx-media-csi.c
>>> +++ b/drivers/staging/media/imx/imx-media-csi.c
>>> @@ -1325,6 +1325,40 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
>>>  	csi_try_fmt(priv, sensor, cfg, sdformat, crop, compose, &cc);
>>>  
>>>  	fmt = __csi_get_fmt(priv, cfg, sdformat->pad, sdformat->which);
>>> +
>>> +	/* Retain current field setting as default */
>>> +	if (sdformat->format.field == V4L2_FIELD_ANY)
>>> +		sdformat->format.field = fmt->field;
>>
>> sdformat->format.field should never be FIELD_ANY. If it is, then that's a
>> subdev bug and I'm pretty sure FIELD_NONE was intended.
> 
> This is the subdev. sdformat is passed in from userspace, so we have to
> deal with it being set to ANY. I'm trying hard right now not to return
> ANY though. The values in sdformat->format are applied to fmt down
> below.

Do you have a git tree with this patch? It is really hard to review without
having the full imx-media-csi.c source.

I think one problem is that it is not clearly defined how subdevs and colorspace
information should work.

Regards,

	Hans

> 
>>> +
>>> +	/* Retain current colorspace setting as default */
>>> +	if (sdformat->format.colorspace == V4L2_COLORSPACE_DEFAULT) {
>>> +		sdformat->format.colorspace = fmt->colorspace;
>>
>> No! Subdevs should never return COLORSPACE_DEFAULT. If they do, then fix
>> them. If this happens a lot (I'm not sure how reliably subdevs fill this
>> in) you could set it to COLORSPACE_RAW. Perhaps with a WARN_ON_ONCE.
> 
> Same here, if userspace calls VIDIOC_SUBDEV_S_FMT with DEFAULT
> colorspace, I don't want to return that unchanged, but overwrite it with
> the currently set value.
> 
>>> +		if (sdformat->format.xfer_func == V4L2_XFER_FUNC_DEFAULT)
>>> +			sdformat->format.xfer_func = fmt->xfer_func;
>>> +		if (sdformat->format.ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT)
>>> +			sdformat->format.ycbcr_enc = fmt->ycbcr_enc;
>>> +		if (sdformat->format.quantization == V4L2_QUANTIZATION_DEFAULT)
>>> +			sdformat->format.quantization = fmt->quantization;
>>
>> Nack. This is meaningless.
> 
> It isn't. It may be wrong, but it is not without effect. If the
> colorimetry info (in fmt) is currently set to something that is
> non-standard, calling VIDIOC_SUBDEV_S_FMT with DEFAULT in xfer_func,
> ycbcr_enc or quantization will cause those old values to be retained,
> instead of overwriting them to DEFAULT.
> 
>>> +	} else {
>>> +		if (sdformat->format.xfer_func == V4L2_XFER_FUNC_DEFAULT) {
>>> +			sdformat->format.xfer_func =
>>> +				V4L2_MAP_XFER_FUNC_DEFAULT(
>>> +						sdformat->format.colorspace);
>>> +		}
>>> +		if (sdformat->format.ycbcr_enc == V4L2_YCBCR_ENC_DEFAULT) {
>>> +			sdformat->format.ycbcr_enc =
>>> +				V4L2_MAP_YCBCR_ENC_DEFAULT(
>>> +						sdformat->format.colorspace);
>>> +		}
>>> +		if (sdformat->format.quantization == V4L2_QUANTIZATION_DEFAULT) {
>>> +			sdformat->format.quantization =
>>> +				V4L2_MAP_QUANTIZATION_DEFAULT(
>>> +						cc->cs != IPUV3_COLORSPACE_YUV,
>>> +						sdformat->format.colorspace,
>>> +						sdformat->format.ycbcr_enc);
>>> +		}
>>
>> This isn't wrong, but it is perfectly fine to keep the DEFAULT here and let
>> the application call V4L2_MAP_.
>>
>> I get the feeling this patch is a workaround for subdev errors. Either that,
>> or the commit log doesn't give me enough information to really understand the
>> problem that's being addressed here.
> 
> It's the latter. I should have written VIDIOC_SUBDEV_S_FMT instead of
> just set_fmt in the comment.
> 
>> Regards,
>>
>> 	Hans
>>
>>> +	}
>>> +
>>>  	*fmt = sdformat->format;
> 
> Here sdformat is applied to the subdev pad.
> 
> regards
> Philipp
> 

--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux