Add a device tree binding to let the driver know that the amplifier is configured to use an external boost supply. Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx> --- Documentation/devicetree/bindings/sound/cs35l35.txt | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/Documentation/devicetree/bindings/sound/cs35l35.txt b/Documentation/devicetree/bindings/sound/cs35l35.txt index 958f0ea..457d176 100644 --- a/Documentation/devicetree/bindings/sound/cs35l35.txt +++ b/Documentation/devicetree/bindings/sound/cs35l35.txt @@ -33,6 +33,10 @@ Optional properties: - cirrus,shared-boost : Boolean to enable ClassH tracking of Advisory Signal if 2 Devices share Boost BST_CTL + - cirrus,external-boost : Boolean to specify the device is using an external + boost supply, note that sharing a boost from another cs35l35 would constitute + using an external supply for the slave device + - cirrus,sp-drv-strength : Value for setting the Serial Port drive strength Table 3-10 of the datasheet lists drive-strength specifications 0 = 1x (Default) -- 2.1.4 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html