Re: [PATCH V10 06/12] of: device: Fix overflow of coherent_dma_mask

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Frank,

On 4/6/2017 12:31 PM, Frank Rowand wrote:
On 04/04/17 03:18, Sricharan R wrote:
Size of the dma-range is calculated as coherent_dma_mask + 1
and passed to arch_setup_dma_ops further. It overflows when
the coherent_dma_mask is set for full 64 bits 0xFFFFFFFFFFFFFFFF,
resulting in size getting passed as 0 wrongly. Fix this by
passsing in max(mask, mask + 1). Note that in this case
when the mask is set to full 64bits, we will be passing the mask
itself to arch_setup_dma_ops instead of the size. The real fix
for this should be to make arch_setup_dma_ops receive the
mask and handle it, to be done in the future.

Signed-off-by: Sricharan R <sricharan@xxxxxxxxxxxxxx>
---
 drivers/of/device.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/of/device.c b/drivers/of/device.c
index c17c19d..c2ae6bb 100644
--- a/drivers/of/device.c
+++ b/drivers/of/device.c
@@ -107,7 +107,7 @@ void of_dma_configure(struct device *dev, struct device_node *np)
 	ret = of_dma_get_range(np, &dma_addr, &paddr, &size);
 	if (ret < 0) {
 		dma_addr = offset = 0;
-		size = dev->coherent_dma_mask + 1;
+		size = max(dev->coherent_dma_mask, dev->coherent_dma_mask + 1);
 	} else {
 		offset = PFN_DOWN(paddr - dma_addr);
 		dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);


NACK.

Passing an invalid size to arch_setup_dma_ops() is only part of the problem.
size is also used in of_dma_configure() before calling arch_setup_dma_ops():

        dev->coherent_dma_mask = min(dev->coherent_dma_mask,
                                     DMA_BIT_MASK(ilog2(dma_addr + size)));
        *dev->dma_mask = min((*dev->dma_mask),
                             DMA_BIT_MASK(ilog2(dma_addr + size)));

which would be incorrect for size == 0xffffffffffffffffULL when
dma_addr != 0.  So the proposed fix really is not papering over
the base problem very well.


Ok, but with your fix for of_dma_get_range and the above fix,
dma_addr will be '0' when size = 0xffffffffffffffffULL,
but DMA_BIT_MASK(ilog2(dma_addr + size)) would be wrong though,
making coherent_dma_mask to be smaller 0x7fffffffffffffffULL.

Regards,
 Sricharan

I agree that the proper solution involves passing a mask instead
of a size to arch_setup_dma_ops().


--
"QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux