On Friday 31 March 2017 01:05 PM, Chunfeng Yun wrote: > The default value of RX detection stable time is 10us, and this > margin is too big for some critical cases which cause U3 link fail > and link to U2(probability is about 1%). So change it to 5us. > merged all the phy patches in this series to linux-phy -next. Thanks Kishon > Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx> > --- > drivers/phy/phy-mt65xx-usb3.c | 18 ++++++++++++++++++ > 1 file changed, 18 insertions(+) > > diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c > index d972067..fe2392a 100644 > --- a/drivers/phy/phy-mt65xx-usb3.c > +++ b/drivers/phy/phy-mt65xx-usb3.c > @@ -112,6 +112,14 @@ > #define P3D_RG_CDR_BIR_LTD0 GENMASK(12, 8) > #define P3D_RG_CDR_BIR_LTD0_VAL(x) ((0x1f & (x)) << 8) > > +#define U3P_U3_PHYD_RXDET1 (SSUSB_SIFSLV_U3PHYD_BASE + 0x128) > +#define P3D_RG_RXDET_STB2_SET GENMASK(17, 9) > +#define P3D_RG_RXDET_STB2_SET_VAL(x) ((0x1ff & (x)) << 9) > + > +#define U3P_U3_PHYD_RXDET2 (SSUSB_SIFSLV_U3PHYD_BASE + 0x12c) > +#define P3D_RG_RXDET_STB2_SET_P3 GENMASK(8, 0) > +#define P3D_RG_RXDET_STB2_SET_P3_VAL(x) (0x1ff & (x)) > + > #define U3P_XTALCTL3 (SSUSB_SIFSLV_SPLLC + 0x0018) > #define XC3_RG_U3_XTAL_RX_PWD BIT(9) > #define XC3_RG_U3_FRC_XTAL_RX_PWD BIT(8) > @@ -295,6 +303,16 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy, > tmp |= P3D_RG_CDR_BIR_LTD0_VAL(0xc) | P3D_RG_CDR_BIR_LTD1_VAL(0x3); > writel(tmp, port_base + U3P_PHYD_CDR1); > > + tmp = readl(port_base + U3P_U3_PHYD_RXDET1); > + tmp &= ~P3D_RG_RXDET_STB2_SET; > + tmp |= P3D_RG_RXDET_STB2_SET_VAL(0x10); > + writel(tmp, port_base + U3P_U3_PHYD_RXDET1); > + > + tmp = readl(port_base + U3P_U3_PHYD_RXDET2); > + tmp &= ~P3D_RG_RXDET_STB2_SET_P3; > + tmp |= P3D_RG_RXDET_STB2_SET_P3_VAL(0x10); > + writel(tmp, port_base + U3P_U3_PHYD_RXDET2); > + > dev_dbg(u3phy->dev, "%s(%d)\n", __func__, index); > } > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
