The patch regulator: DT: Add settling time property for non-linear voltage change has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From cfd2cedb482ae29ce13a3db46cc24f0c082ca9cf Mon Sep 17 00:00:00 2001 From: Laxman Dewangan <ldewangan@xxxxxxxxxx> Date: Tue, 4 Apr 2017 18:59:49 +0530 Subject: [PATCH] regulator: DT: Add settling time property for non-linear voltage change Some regulators (some PWM regulators) have the voltage transition exponentially. On such cases, the settling time for voltage change is treated as constant time. Add DT property for providing the settling time for any level of voltage change for non-linear voltage change. signed-off-by: Laxman Dewangan <ldewangan@xxxxxxxxxx> Acked-by: Rob Herring <robh@xxxxxxxxxx> Signed-off-by: Mark Brown <broonie@xxxxxxxxxx> --- Documentation/devicetree/bindings/regulator/regulator.txt | 3 +++ 1 file changed, 3 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt index 6ab5aef619d9..d18edb075e1c 100644 --- a/Documentation/devicetree/bindings/regulator/regulator.txt +++ b/Documentation/devicetree/bindings/regulator/regulator.txt @@ -21,6 +21,9 @@ Optional properties: design requires. This property describes the total system ramp time required due to the combination of internal ramping of the regulator itself, and board design issues such as trace capacitance and load on the supply. +- regulator-settling-time-us: Settling time, in microseconds, for voltage + change if regulator have the constant time for any level voltage change. + This is useful when regulator have exponential voltage change. - regulator-soft-start: Enable soft start so that voltage ramps slowly - regulator-state-mem sub-root node for Suspend-to-RAM mode : suspend to memory, the device goes to sleep, but all data stored in memory, -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html