Re: [PATCH V7 0/4] phy: USB and PCIe phy drivers for Qcom chipsets

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Vivek,

On Wednesday 05 April 2017 06:02 PM, Vivek Gautam wrote:
> This patch series adds couple of PHY drivers for Qualcomm chipsets.
> a) qcom-qusb2 phy driver: that provides High Speed USB functionality.
> b) qcom-qmp phy driver: that is a combo phy providing support for
>    USB3, PCIe, UFS and few other controllers.
> 
> The patches are based on next branch of linux-phy tree.
> 
> These patches have been tested on Dragon board db820c hardware with
> required set of dt patches and the patches to get rpm up on msm8996.
> Couple of other patches [1, 2] fixing DMA config for XHCI are also
> pulled in for testing.
> A branch based on torvald's master is available in github [3].

I get a bunch of checkpatch errors/warnings when I run checkpatch with --strict
option. Those look simple enough to be fixed. Can you respin your series fixing
those?

Thanks
Kishon

> 
> Changes since v6:
>  - Rebased on phy/next and *not* including phy grouping series[4].
>  - qusb2-phy: addressed Stephen's comment.
>    - Dropped pm8994_s2 corner regulator from QUSB2 phy bindings.
>  - qmp-phy: none on functionality side.
>  
> Changes since v5:
>  - Addressed review comments from Bjorn:
>    - Removed instances of readl/wirtel_relaxed calls from the drivers.
>      Instead, using simple readl/writel. Inserting a readl after a writel
>      to ensure the write is through to the device.
>    - Replaced regulator handling with regulator_bulk_** apis. This helps
>      in cutting down a lot of regulator handling code.
>    - Fixed minor return statements.
> 
> Changes since v4:
>  - Addressed comment to add child nodes for qmp phy driver. Each phy lane
>    now has a separate child node under the main qmp node.
>  - Modified the clock and reset initialization and enable methods.
>    Different phys - pcie, usb and later ufs, have varying number of clocks
>    and resets that are mandatory. So adding provision for clocks and reset
>    lists helps in requesting all mandatory resources for individual phys
>    and handle their failure cases accordingly.
> 
> Changes since v3:
>  - Addressed review comments given by Rob and Stephen for qusb2 phy
>    and qmp phy bindings respectively.
>  - Addressed review comments given by Stephen and Bjorn for qmp phy driver.
> 
> Changes since v2:
>  - Addressed review comments given by Rob and Stephen for bindings.
>  - Addressed the review comments given by Stephen for the qusb2 and qmp
>    phy drivers.
> 
> Changes since v1:
>  - Moved device tree binding documentation to separate patches, as suggested
>    by Rob.
>  - Addressed review comment regarding qfprom accesses by qusb2 phy driver,
>    given by Rob.
>  - Addressed review comments from Kishon.
>  - Addressed review comments from Srinivas for QMP phy driver.
>  - Addressed kbuild warning.
> 
> Please see individual patches for detailed changelogs.
> 
> [1] https://patchwork.kernel.org/patch/9567767/
> [2] https://patchwork.kernel.org/patch/9567779/
> [3] https://github.com/vivekgautam1/linux/tree/linux-v4.11-rc5-qmp-phy-db820c
> [4] https://lkml.org/lkml/2017/3/20/407
> 
> Vivek Gautam (4):
>   dt-bindings: phy: Add support for QUSB2 phy
>   phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips
>   dt-bindings: phy: Add support for QMP phy
>   phy: qcom-qmp: new qmp phy driver for qcom-chipsets
> 
>  .../devicetree/bindings/phy/qcom-qmp-phy.txt       |  106 ++
>  .../devicetree/bindings/phy/qcom-qusb2-phy.txt     |   43 +
>  drivers/phy/Kconfig                                |   18 +
>  drivers/phy/Makefile                               |    2 +
>  drivers/phy/phy-qcom-qmp.c                         | 1153 ++++++++++++++++++++
>  drivers/phy/phy-qcom-qusb2.c                       |  491 +++++++++
>  6 files changed, 1813 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt
>  create mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt
>  create mode 100644 drivers/phy/phy-qcom-qmp.c
>  create mode 100644 drivers/phy/phy-qcom-qusb2.c
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux