On Sun, Apr 02, 2017 at 09:33:01PM +0800, Icenowy Zheng wrote:
> Allwinner H3 features a thermal sensor like the one in A33, but has its
> register re-arranged, the clock divider moved to CCU (originally the
> clock divider is in ADC) and added a pair of bus clock and reset.
>
> Update the binding document to cover H3.
>
> Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx>
> ---
> .../devicetree/bindings/mfd/sun4i-gpadc.txt | 23 ++++++++++++++++++++--
> 1 file changed, 21 insertions(+), 2 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> index badff3611a98..7753133ca0ff 100644
> --- a/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> +++ b/Documentation/devicetree/bindings/mfd/sun4i-gpadc.txt
> @@ -4,12 +4,20 @@ The Allwinner SoCs all have an ADC that can also act as a thermal sensor
> and sometimes as a touchscreen controller.
>
> Required properties:
> - - compatible: "allwinner,sun8i-a33-ths",
> + - compatible: must contain one of the following compatibles:
> + - "allwinner,sun8i-a33-ths"
> + - "allwinner,sun8i-h3-ths"
> - reg: mmio address range of the chip,
> - #thermal-sensor-cells: shall be 0,
> - #io-channel-cells: shall be 0,
>
> -Example:
> +Required properties for the following compatibles:
> + - "allwinner,sun8i-h3-ths"
> + - clocks: the bus clock and the input clock of the ADC,
> + - clock-names: should be "bus" and "ths",
> + - resets: the bus reset of the ADC,
> +
> +Example for A33:
> ths: ths@01c25000 {
> compatible = "allwinner,sun8i-a33-ths";
> reg = <0x01c25000 0x100>;
> @@ -17,6 +25,17 @@ Example:
> #io-channel-cells = <0>;
> };
>
> +Example for H3:
> + ths: ths@01c25000 {
adc@...
And drop the leading 0.
> + compatible = "allwinner,sun8i-h3-ths";
> + reg = <0x01c25000 0x100>;
> + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>;
> + clock-names = "bus", "ths";
> + resets = <&ccu RST_BUS_THS>;
> + #thermal-sensor-cells = <0>;
> + #io-channel-cells = <0>;
> + };
> +
> sun4i, sun5i and sun6i SoCs are also supported via the older binding:
>
> sun4i resistive touchscreen controller
> --
> 2.12.2
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@xxxxxxxxxxxxxxxxxxx
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
