On 04/04/17 11:18, Sricharan R wrote:
> From: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
>
> Invalid dma-ranges values should be worked around when retrieving the
> DMA range in of_dma_get_range(), not by all callers of the function.
> This isn't much of a problem now that we have a single caller, but that
> situation will change when moving DMA configuration to device probe
> time.
Just for completeness:
Reviewed-by: Robin Murphy <robin.murphy@xxxxxxx>
> Tested-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@xxxxxxxxxxxxxxxx>
> ---
> drivers/of/address.c | 20 ++++++++++++++++++--
> drivers/of/device.c | 15 ---------------
> 2 files changed, 18 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/of/address.c b/drivers/of/address.c
> index 02b2903..6aeb816 100644
> --- a/drivers/of/address.c
> +++ b/drivers/of/address.c
> @@ -819,8 +819,8 @@ void __iomem *of_io_request_and_map(struct device_node *np, int index,
> * CPU addr (phys_addr_t) : pna cells
> * size : nsize cells
> *
> - * It returns -ENODEV if "dma-ranges" property was not found
> - * for this device in DT.
> + * Return 0 on success, -ENODEV if the "dma-ranges" property was not found for
> + * this device in DT, or -EINVAL if the CPU address or size is invalid.
> */
> int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *size)
> {
> @@ -880,6 +880,22 @@ int of_dma_get_range(struct device_node *np, u64 *dma_addr, u64 *paddr, u64 *siz
> *dma_addr = dmaaddr;
>
> *size = of_read_number(ranges + naddr + pna, nsize);
> + /*
> + * DT nodes sometimes incorrectly set the size as a mask. Work around
> + * those incorrect DT by computing the size as mask + 1.
> + */
> + if (*size & 1) {
> + pr_warn("%s: size 0x%llx for dma-range in node(%s) set as mask\n",
> + __func__, *size, np->full_name);
> + *size = *size + 1;
> + }
> +
> + if (!*size) {
> + pr_err("%s: invalid size zero for dma-range in node(%s)\n",
> + __func__, np->full_name);
> + ret = -EINVAL;
> + goto out;
> + }
>
> pr_debug("dma_addr(%llx) cpu_addr(%llx) size(%llx)\n",
> *dma_addr, *paddr, *size);
> diff --git a/drivers/of/device.c b/drivers/of/device.c
> index b1e6beb..09dedd0 100644
> --- a/drivers/of/device.c
> +++ b/drivers/of/device.c
> @@ -110,21 +110,6 @@ void of_dma_configure(struct device *dev, struct device_node *np)
> size = dev->coherent_dma_mask + 1;
> } else {
> offset = PFN_DOWN(paddr - dma_addr);
> -
> - /*
> - * Add a work around to treat the size as mask + 1 in case
> - * it is defined in DT as a mask.
> - */
> - if (size & 1) {
> - dev_warn(dev, "Invalid size 0x%llx for dma-range\n",
> - size);
> - size = size + 1;
> - }
> -
> - if (!size) {
> - dev_err(dev, "Adjusted size 0x%llx invalid\n", size);
> - return;
> - }
> dev_dbg(dev, "dma_pfn_offset(%#08lx)\n", offset);
> }
>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
