On Mon, 27 Mar 2017, Elaine Zhang wrote: > the rk8xx chip id is: > ((MSB << 8) | LSB) & 0xfff0 > > Signed-off-by: Elaine Zhang <zhangqing@xxxxxxxxxxxxxx> > --- It's usually helpful to keep a changelog here: v3 => v4: - Stuff that happened v2 => v3: - Stuff that happened v1 => v2: - Stuff that happened > drivers/mfd/rk808.c | 21 +++++++++++++++------ > include/linux/mfd/rk808.h | 1 + > 2 files changed, 16 insertions(+), 6 deletions(-) > > diff --git a/drivers/mfd/rk808.c b/drivers/mfd/rk808.c > index fd087cbb0bde..3334a2a7f3fb 100644 > --- a/drivers/mfd/rk808.c > +++ b/drivers/mfd/rk808.c > @@ -325,7 +325,7 @@ static int rk808_probe(struct i2c_client *client, > void (*pm_pwroff_fn)(void); > int nr_pre_init_regs; > int nr_cells; > - int pm_off = 0; > + int pm_off = 0, msb, lsb; > int ret; > int i; > > @@ -333,14 +333,23 @@ static int rk808_probe(struct i2c_client *client, > if (!rk808) > return -ENOMEM; > > - rk808->variant = i2c_smbus_read_word_data(client, RK808_ID_MSB); > - if (rk808->variant < 0) { > - dev_err(&client->dev, "Failed to read the chip id at 0x%02x\n", > + /* read Chip variant */ Please use correct grammar. "Read chip variant" > + msb = i2c_smbus_read_byte_data(client, RK808_ID_MSB); > + if (msb < 0) { > + dev_err(&client->dev, "failed to read the chip id at 0x%x\n", Although this error messages makes the comment above redundant. > RK808_ID_MSB); > - return rk808->variant; > + return msb; > } > > - dev_dbg(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant); > + lsb = i2c_smbus_read_byte_data(client, RK808_ID_LSB); > + if (lsb < 0) { > + dev_err(&client->dev, "failed to read the chip id at 0x%x\n", > + RK808_ID_LSB); > + return lsb; > + } > + > + rk808->variant = ((msb << 8) | lsb) & RK8XX_ID_MSK; > + dev_info(&client->dev, "Chip id: 0x%x\n", (unsigned int)rk808->variant); > > switch (rk808->variant) { > case RK808_ID: > diff --git a/include/linux/mfd/rk808.h b/include/linux/mfd/rk808.h > index 83701ef7d3c7..54feb140c210 100644 > --- a/include/linux/mfd/rk808.h > +++ b/include/linux/mfd/rk808.h > @@ -298,6 +298,7 @@ enum rk818_reg { > #define VOUT_LO_INT BIT(0) > #define CLK32KOUT2_EN BIT(0) > > +#define RK8XX_ID_MSK 0xfff0 > enum { > BUCK_ILMIN_50MA, > BUCK_ILMIN_100MA, -- Lee Jones Linaro STMicroelectronics Landing Team Lead Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook | Twitter | Blog -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html