Hi Icenowy, On 02/04/2017 15:33, Icenowy Zheng wrote: > As we have gained the support for the thermal sensor in H3, we can now > add its device nodes to the device tree. > > Add them to the H3 device tree. > > The H5 thermal sensor has some differences, and will be added furtherly. > > Signed-off-by: Icenowy Zheng <icenowy@xxxxxxx> > --- > arch/arm/boot/dts/sun8i-h3.dtsi | 26 ++++++++++++++++++++++++++ > 1 file changed, 26 insertions(+) > > diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi > index b36f9f423c39..552217bb9266 100644 > --- a/arch/arm/boot/dts/sun8i-h3.dtsi > +++ b/arch/arm/boot/dts/sun8i-h3.dtsi > @@ -72,6 +72,32 @@ > }; > }; > > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&ths>; > + }; > + > + soc { > + ths: ths@01c25000 { > + compatible = "allwinner,sun8i-h3-ths"; > + reg = <0x01c25000 0x100>; > + clocks = <&ccu CLK_BUS_THS>, <&ccu CLK_THS>; > + clock-names = "bus", "ths"; > + resets = <&ccu RST_BUS_THS>; > + #thermal-sensor-cells = <0>; > + #io-channel-cells = <0>; > + }; > + }; > + > + thermal-zones { > + cpu_thermal { > + /* milliseconds */ > + polling-delay-passive = <250>; > + polling-delay = <1000>; > + thermal-sensors = <&ths>; > + }; Would it make sense to add the CPU temp trip points in this patch? Or do we wait to have CPU OPPs and thermal throttling to add them? I guess you can find them either in the datasheet or in vendor tree. Thanks, Quentin -- Quentin Schulz, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html