Hi, The Atmel Peripheral touch controller subsystem offers built-in hardware for capacitive touch measurment on sensors that function as buttons, sliders and wheels. It is available on SAMA5D2. A firmware and a configuration file describing the topology and the parameters of the sensor are loaded when probing the driver. Ludovic Desroches (4): input: misc: introduce Atmel PTC driver ARM: dts: at91: sama5d2: add PTC subsystem device MAINTAINERS: add Atmel PTC entries dt-bindings: input: Add Atmel PTC subsystem bindings .../devicetree/bindings/input/atmel,ptc.txt | 67 +++ MAINTAINERS | 7 + arch/arm/boot/dts/sama5d2.dtsi | 16 + drivers/input/misc/Kconfig | 12 + drivers/input/misc/Makefile | 1 + drivers/input/misc/atmel_ptc.c | 651 +++++++++++++++++++++ include/uapi/linux/atmel_ptc.h | 355 +++++++++++ 7 files changed, 1109 insertions(+) create mode 100644 Documentation/devicetree/bindings/input/atmel,ptc.txt create mode 100644 drivers/input/misc/atmel_ptc.c create mode 100644 include/uapi/linux/atmel_ptc.h -- 2.9.0 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html