There will be a problem if SS port is diasbled and HS port extracts
100uA from SS port, so disable extract 100uA from SS port in the case,
when disable it, PA0_RG_USB20_INTR_EN should be set, otherwise HS port
only works on LS.
Signed-off-by: Chunfeng Yun <chunfeng.yun@xxxxxxxxxxxx>
---
drivers/phy/phy-mt65xx-usb3.c | 24 ++++++++++--------------
1 file changed, 10 insertions(+), 14 deletions(-)
diff --git a/drivers/phy/phy-mt65xx-usb3.c b/drivers/phy/phy-mt65xx-usb3.c
index 5eea65c..ee83d93 100644
--- a/drivers/phy/phy-mt65xx-usb3.c
+++ b/drivers/phy/phy-mt65xx-usb3.c
@@ -46,6 +46,7 @@
#define U3P_USBPHYACR0 0x000
#define PA0_RG_U2PLL_FORCE_ON BIT(15)
+#define PA0_RG_USB20_INTR_EN BIT(5)
#define U3P_USBPHYACR2 0x008
#define PA2_RG_SIF_U2PLL_FORCE_EN BIT(18)
@@ -339,6 +340,15 @@ static void phy_instance_init(struct mt65xx_u3phy *u3phy,
tmp &= ~P2C_RG_UART_EN;
writel(tmp, com + U3P_U2PHYDTM1);
+ tmp = readl(com + U3P_USBPHYACR0);
+ tmp |= PA0_RG_USB20_INTR_EN;
+ writel(tmp, com + U3P_USBPHYACR0);
+
+ /* disable switch 100uA current to SSUSB */
+ tmp = readl(com + U3P_USBPHYACR5);
+ tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
+ writel(tmp, com + U3P_USBPHYACR5);
+
if (!index) {
tmp = readl(com + U3P_U2PHYACR4);
tmp &= ~P2C_U2_GPIO_CTR_MSK;
@@ -393,13 +403,6 @@ static void phy_instance_power_on(struct mt65xx_u3phy *u3phy,
tmp |= PA6_RG_U2_OTG_VBUSCMP_EN;
writel(tmp, com + U3P_USBPHYACR6);
- if (!index) {
- /* switch 100uA current to SSUSB */
- tmp = readl(com + U3P_USBPHYACR5);
- tmp |= PA5_RG_U2_HS_100U_U3_EN;
- writel(tmp, com + U3P_USBPHYACR5);
- }
-
tmp = readl(com + U3P_U2PHYDTM1);
tmp |= P2C_RG_VBUSVALID | P2C_RG_AVALID;
tmp &= ~P2C_RG_SESSEND;
@@ -435,13 +438,6 @@ static void phy_instance_power_off(struct mt65xx_u3phy *u3phy,
tmp &= ~PA6_RG_U2_OTG_VBUSCMP_EN;
writel(tmp, com + U3P_USBPHYACR6);
- if (!index) {
- /* switch 100uA current back to USB2.0 */
- tmp = readl(com + U3P_USBPHYACR5);
- tmp &= ~PA5_RG_U2_HS_100U_U3_EN;
- writel(tmp, com + U3P_USBPHYACR5);
- }
-
/* let suspendm=0, set utmi into analog power down */
tmp = readl(com + U3P_U2PHYDTM0);
tmp &= ~P2C_RG_SUSPENDM;
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
