Hi Benjamin
On 03/30/2017 09:41 AM, Benjamin Gaignard wrote:
> + Patrice for sti DT
In order to be coherent with all previous STi DT patches,
can you update the commit message with "ARM: dts: STiH410: update
sti-cec for CEC notifier support"
Thanks
Patrice
>
> 2017-03-29 16:15 GMT+02:00 Hans Verkuil <hverkuil@xxxxxxxxx>:
>> From: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
>>
>> To use CEC notifier sti CEC driver needs to get phandle
>> of the hdmi device.
>>
>> Signed-off-by: Benjamin Gaignard <benjamin.gaignard@xxxxxxxxxx>
>> Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>> CC: devicetree@xxxxxxxxxxxxxxx
>> ---
>> arch/arm/boot/dts/stih407-family.dtsi | 12 ------------
>> arch/arm/boot/dts/stih410.dtsi | 13 +++++++++++++
>> 2 files changed, 13 insertions(+), 12 deletions(-)
>>
>> diff --git a/arch/arm/boot/dts/stih407-family.dtsi b/arch/arm/boot/dts/stih407-family.dtsi
>> index d753ac36788f..044184580326 100644
>> --- a/arch/arm/boot/dts/stih407-family.dtsi
>> +++ b/arch/arm/boot/dts/stih407-family.dtsi
>> @@ -742,18 +742,6 @@
>> <&clk_s_c0_flexgen CLK_ETH_PHY>;
>> };
>>
>> - cec: sti-cec@094a087c {
>> - compatible = "st,stih-cec";
>> - reg = <0x94a087c 0x64>;
>> - clocks = <&clk_sysin>;
>> - clock-names = "cec-clk";
>> - interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
>> - interrupt-names = "cec-irq";
>> - pinctrl-names = "default";
>> - pinctrl-0 = <&pinctrl_cec0_default>;
>> - resets = <&softreset STIH407_LPM_SOFTRESET>;
>> - };
>> -
>> rng10: rng@08a89000 {
>> compatible = "st,rng";
>> reg = <0x08a89000 0x1000>;
>> diff --git a/arch/arm/boot/dts/stih410.dtsi b/arch/arm/boot/dts/stih410.dtsi
>> index 3c9672c5b09f..21fe72b183d8 100644
>> --- a/arch/arm/boot/dts/stih410.dtsi
>> +++ b/arch/arm/boot/dts/stih410.dtsi
>> @@ -281,5 +281,18 @@
>> <&clk_s_c0_flexgen CLK_ST231_DMU>,
>> <&clk_s_c0_flexgen CLK_FLASH_PROMIP>;
>> };
>> +
>> + sti-cec@094a087c {
>> + compatible = "st,stih-cec";
>> + reg = <0x94a087c 0x64>;
>> + clocks = <&clk_sysin>;
>> + clock-names = "cec-clk";
>> + interrupts = <GIC_SPI 140 IRQ_TYPE_NONE>;
>> + interrupt-names = "cec-irq";
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_cec0_default>;
>> + resets = <&softreset STIH407_LPM_SOFTRESET>;
>> + hdmi-phandle = <&sti_hdmi>;
>> + };
>> };
>> };
>> --
>> 2.11.0
>>
>
>
>��.n��������+%������w��{.n����z�{��ܨ}���Ơz�j:+v�����w����ޙ��&�)ߡ�a����z�ޗ���ݢj��w�f
