On Wed, 2017-03-29 at 03:34 -0700, Brendan Higgins wrote: > I think I addressed this on the other email with the actual driver. > Anyway, I thought that this is pretty much the dummy irqchip code is > for; I have seen some other drivers do the same thing. It is true > that > this is a really basic "interrupt controller;" it cannot mask on its > own, etc; nevertheless, I think you will pretty much end up with the > same code for an "I2C controller;" it just won't use an irq_domain. Don't worry too much about this. As I think I mention it's not a huge deal at this stage, I just wanted to make sure you were aware of the compromise(s) involved. Regarding the other comment about the "fast mode", my main worry here is that somebody might come up with a 2Mhz capable device, we'll hit your 1Mhz test, enable fast mode, and shoot it with 3.4Mhz which it might not be happy at all about... I think the cut-off for switching to the "fast" mode should basically be the fast speed mode frequency (which isn't clear from the spec but seems to be 3.4Mhz). Otherwise people will end up with higher speeds than what they asked for and that's bad. Cheers, Ben. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
