From: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
The cropping rectangle was being modified by the output pad's
set_fmt, which is the wrong pad to do this. The crop rectangle
should not be modified by the output pad set_fmt. It instead
should be reset to the full input frame when the input pad format
is set.
The output pad set_fmt should set width/height to the current
crop dimensions, or 1/2 the crop width/height to enable
downscaling.
So the other part of this patch is to enable downscaling if
the output pad dimension(s) are 1/2 the crop dimension(s) at
csi_setup() time.
Signed-off-by: Philipp Zabel <p.zabel@xxxxxxxxxxxxxx>
Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
---
drivers/staging/media/imx/imx-media-csi.c | 35 ++++++++++++++++++++-----------
1 file changed, 23 insertions(+), 12 deletions(-)
diff --git a/drivers/staging/media/imx/imx-media-csi.c b/drivers/staging/media/imx/imx-media-csi.c
index 37c68d8..730966b 100644
--- a/drivers/staging/media/imx/imx-media-csi.c
+++ b/drivers/staging/media/imx/imx-media-csi.c
@@ -555,6 +555,10 @@ static int csi_setup(struct csi_priv *priv)
ipu_csi_set_window(priv->csi, &priv->crop);
+ ipu_csi_set_downsize(priv->csi,
+ priv->crop.width == 2 * outfmt->width,
+ priv->crop.height == 2 * outfmt->height);
+
ipu_csi_init_interface(priv->csi, &sensor_mbus_cfg, &if_fmt);
ipu_csi_set_dest(priv->csi, priv->dest);
@@ -945,15 +949,15 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
switch (sdformat->pad) {
case CSI_SRC_PAD_DIRECT:
case CSI_SRC_PAD_IDMAC:
- crop.left = priv->crop.left;
- crop.top = priv->crop.top;
- crop.width = sdformat->format.width;
- crop.height = sdformat->format.height;
- ret = csi_try_crop(priv, &crop, sensor);
- if (ret)
- goto out;
- sdformat->format.width = crop.width;
- sdformat->format.height = crop.height;
+ if (sdformat->format.width < priv->crop.width * 3 / 4)
+ sdformat->format.width = priv->crop.width / 2;
+ else
+ sdformat->format.width = priv->crop.width;
+
+ if (sdformat->format.height < priv->crop.height * 3 / 4)
+ sdformat->format.height = priv->crop.height / 2;
+ else
+ sdformat->format.height = priv->crop.height;
if (sdformat->pad == CSI_SRC_PAD_IDMAC) {
cc = imx_media_find_format(0, sdformat->format.code,
@@ -999,6 +1003,14 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
}
break;
case CSI_SINK_PAD:
+ crop.left = 0;
+ crop.top = 0;
+ crop.width = sdformat->format.width;
+ crop.height = sdformat->format.height;
+ ret = csi_try_crop(priv, &crop, sensor);
+ if (ret)
+ goto out;
+
cc = imx_media_find_format(0, sdformat->format.code,
true, false);
if (!cc) {
@@ -1017,9 +1029,8 @@ static int csi_set_fmt(struct v4l2_subdev *sd,
} else {
priv->format_mbus[sdformat->pad] = sdformat->format;
priv->cc[sdformat->pad] = cc;
- /* Update the crop window if this is an output pad */
- if (sdformat->pad == CSI_SRC_PAD_DIRECT ||
- sdformat->pad == CSI_SRC_PAD_IDMAC)
+ /* Reset the crop window if this is the input pad */
+ if (sdformat->pad == CSI_SINK_PAD)
priv->crop = crop;
}
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
