Re: [PATCH v5 4/9] usb: ehci-s5p: Change to use phy provided by the generic phy framework

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Hi Kamil,


On Fri, Dec 20, 2013 at 6:54 PM, Kamil Debski <k.debski@xxxxxxxxxxx> wrote:
> Change the phy provider used from the old one using the USB phy
> framework to a new one using the Generic phy framework.
>
> Signed-off-by: Kamil Debski <k.debski@xxxxxxxxxxx>
> Signed-off-by: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>

Commit title:
s/ehci-s5p/ehci-exynos

> ---
>  Documentation/devicetree/bindings/usb/usb-ehci.txt |   35 +++++++
>  drivers/usb/host/ehci-exynos.c                     |   97 +++++++++++++-------
>  2 files changed, 98 insertions(+), 34 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> index fa18612..413f7cd 100644
> --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt
> +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt
> @@ -14,6 +14,10 @@ If controller implementation operates with big endian descriptors,
>  If both big endian registers and descriptors are used by the controller
>  implementation, "big-endian" property can be specified instead of having
>  both "big-endian-regs" and "big-endian-desc".
> +  - port: if in the SoC there are EHCI phys, they should be listed here.
> +One phy per port. Each port should have its reg entry with a consecutive
> +number. Also it should contain phys and phy-names entries specifying the
> +phy used by the port.
>
>  Example (Sequoia 440EPx):
>      ehci@e0000300 {
> @@ -23,3 +27,34 @@ Example (Sequoia 440EPx):
>            reg = <0 e0000300 90 0 e0000390 70>;
>            big-endian;
>     };
> +
> +Example (Exynos 4212):
> +    ehci@12580000 {
> +        compatible = "samsung,exynos4210-ehci";
> +        reg = <0x12580000 0x20000>;
> +        interrupts = <0 70 0>;
> +        clocks = <&clock 304>, <&clock 305>;
> +        clock-names = "usbhost", "otg";
> +        status = "disabled";
> +        #address-cells = <1>;
> +        #size-cells = <0>;
> +        port@0 {
> +            reg = <0>;
> +            phys = <&usb2phy 1>;
> +            phy-names = "host";
> +            status = "disabled";
> +        };
> +        port@1 {
> +            reg = <1>;
> +            phys = <&usb2phy 2>;
> +            phy-names = "hsic0";
> +            status = "disabled";
> +        };
> +        port@2 {
> +            reg = <2>;
> +            phys = <&usb2phy 3>;
> +            phy-names = "hsic1";
> +            status = "disabled";
> +        };
> +    };

Should we place above documentation in
"Documentation/devicetree/bindings/usb/exynos-usb.txt" ?
or is it something that i am missing.

> +
> diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c
> index d1d8c47..7c35501 100644
> --- a/drivers/usb/host/ehci-exynos.c
> +++ b/drivers/usb/host/ehci-exynos.c
> @@ -19,12 +19,12 @@
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_gpio.h>
> +#include <linux/phy/phy.h>
>  #include <linux/platform_device.h>
>  #include <linux/usb/phy.h>
>  #include <linux/usb/samsung_usb_phy.h>
>  #include <linux/usb.h>
>  #include <linux/usb/hcd.h>
> -#include <linux/usb/otg.h>
>
>  #include "ehci.h"
>
> @@ -42,10 +42,10 @@
>  static const char hcd_name[] = "ehci-exynos";
>  static struct hc_driver __read_mostly exynos_ehci_hc_driver;
>
> +#define PHY_NUMBER 3
>  struct exynos_ehci_hcd {
>         struct clk *clk;
> -       struct usb_phy *phy;
> -       struct usb_otg *otg;
> +       struct phy *phy[PHY_NUMBER];
>  };
>
>  #define to_exynos_ehci(hcd) (struct exynos_ehci_hcd *)(hcd_to_ehci(hcd)->priv)
> @@ -69,13 +69,43 @@ static void exynos_setup_vbus_gpio(struct platform_device *pdev)
>                 dev_err(dev, "can't request ehci vbus gpio %d", gpio);
>  }
>
> +static int exynos_phys_on(struct phy *p[])
> +{
> +       int i;
> +       int ret = 0;
> +
> +       for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
> +               if (p[i])
> +                       ret = phy_power_on(p[i]);
> +       if (ret)
> +               for (i--; i > 0; i--)
> +                       if (p[i])
> +                               phy_power_off(p[i]);

So we are turning off, say, port0 phy in case port1 phy power_on fails;
can't we still leave a usb2.0 phy(a normal host phy) 'on' in case the
HSIC phy fails ?

> +
> +       return ret;
> +}
> +
> +static int exynos_phys_off(struct phy *p[])
> +{
> +       int i;
> +       int ret = 0;
> +
> +       for (i = 0; ret == 0 && i < PHY_NUMBER; i++)
> +               if (p[i])
> +                       ret = phy_power_off(p[i]);
> +
> +       return ret;
> +}
> +
>  static int exynos_ehci_probe(struct platform_device *pdev)
>  {
>         struct exynos_ehci_hcd *exynos_ehci;
>         struct usb_hcd *hcd;
>         struct ehci_hcd *ehci;
>         struct resource *res;
> -       struct usb_phy *phy;
> +       struct phy *phy;
> +       struct device_node *child;
> +       int phy_number;
>         int irq;
>         int err;
>
> @@ -102,14 +132,26 @@ static int exynos_ehci_probe(struct platform_device *pdev)
>                                         "samsung,exynos5440-ehci"))
>                 goto skip_phy;
>
> -       phy = devm_usb_get_phy(&pdev->dev, USB_PHY_TYPE_USB2);
> -       if (IS_ERR(phy)) {
> -               usb_put_hcd(hcd);
> -               dev_warn(&pdev->dev, "no platform data or transceiver defined\n");
> -               return -EPROBE_DEFER;
> -       } else {
> -               exynos_ehci->phy = phy;
> -               exynos_ehci->otg = phy->otg;
> +       for_each_available_child_of_node(pdev->dev.of_node, child) {
> +               err = of_property_read_u32(child, "reg", &phy_number);
> +               if (err) {
> +                       dev_err(&pdev->dev, "Failed to parse device tree\n");
> +                       of_node_put(child);
> +                       return err;
> +               }
> +               if (phy_number >= PHY_NUMBER) {
> +                       dev_err(&pdev->dev, "Failed to parse device tree - number out of range\n");
> +                       of_node_put(child);
> +                       return -EINVAL;
> +               }
> +               phy = devm_of_phy_get(&pdev->dev, child, 0);
> +               of_node_put(child);
> +               if (IS_ERR(phy)) {
> +                       dev_err(&pdev->dev, "Failed to get phy number %d",
> +                                                               phy_number);
> +                       return PTR_ERR(phy);
> +               }
> +               exynos_ehci->phy[phy_number] = phy;
>         }
>
>  skip_phy:
> @@ -149,11 +191,11 @@ skip_phy:
>                 goto fail_io;
>         }
>
> -       if (exynos_ehci->otg)
> -               exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
> -
> -       if (exynos_ehci->phy)
> -               usb_phy_init(exynos_ehci->phy);
> +       err = exynos_phys_on(exynos_ehci->phy);
> +       if (err) {
> +               dev_err(&pdev->dev, "Failed to enabled phys\n");
> +               goto fail_io;
> +       }
>
>         ehci = hcd_to_ehci(hcd);
>         ehci->caps = hcd->regs;
> @@ -173,8 +215,7 @@ skip_phy:
>         return 0;
>
>  fail_add_hcd:
> -       if (exynos_ehci->phy)
> -               usb_phy_shutdown(exynos_ehci->phy);
> +       exynos_phys_off(exynos_ehci->phy);
>  fail_io:
>         clk_disable_unprepare(exynos_ehci->clk);
>  fail_clk:
> @@ -189,11 +230,7 @@ static int exynos_ehci_remove(struct platform_device *pdev)
>
>         usb_remove_hcd(hcd);
>
> -       if (exynos_ehci->otg)
> -               exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
> -
> -       if (exynos_ehci->phy)
> -               usb_phy_shutdown(exynos_ehci->phy);
> +       exynos_phys_off(exynos_ehci->phy);
>
>         clk_disable_unprepare(exynos_ehci->clk);
>
> @@ -213,11 +250,7 @@ static int exynos_ehci_suspend(struct device *dev)
>
>         rc = ehci_suspend(hcd, do_wakeup);
>
> -       if (exynos_ehci->otg)
> -               exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
> -
> -       if (exynos_ehci->phy)
> -               usb_phy_shutdown(exynos_ehci->phy);
> +       exynos_phys_off(exynos_ehci->phy);
>
>         clk_disable_unprepare(exynos_ehci->clk);
>
> @@ -231,11 +264,7 @@ static int exynos_ehci_resume(struct device *dev)
>
>         clk_prepare_enable(exynos_ehci->clk);
>
> -       if (exynos_ehci->otg)
> -               exynos_ehci->otg->set_host(exynos_ehci->otg, &hcd->self);
> -
> -       if (exynos_ehci->phy)
> -               usb_phy_init(exynos_ehci->phy);
> +       exynos_phys_on(exynos_ehci->phy);
>
>         /* DMA burst Enable */
>         writel(EHCI_INSNREG00_ENABLE_DMA_BURST, EHCI_INSNREG00(hcd->regs));
> --

Rest all looks good. :-)
I tested this patch along with other patches in the series on smdk5250.

Tested-by: Vivek Gautam <gautam.vivek@xxxxxxxxxxx>

> 1.7.9.5
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html



-- 
Best Regards
Vivek Gautam
Samsung R&D Institute, Bangalore
India
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux