Hi Georgi,
Quoting Georgi Djakov (2017-03-01 10:22:34)
> diff --git a/Documentation/devicetree/bindings/interconnect/interconnect.txt b/Documentation/devicetree/bindings/interconnect/interconnect.txt
> new file mode 100644
> index 000000000000..c62d86e4c52d
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/interconnect/interconnect.txt
> @@ -0,0 +1,91 @@
> +Interconnect Provider Device Tree Bindings
> +=========================================
I agree with Rob to skip the DT bindings for now. However I did review
this privately in February and I'll re-post my review comments here for
when the bindings do get discussed at a later date:
> +Optional properties:
> +interconnect-port : A phandle and interconnect provider specifier as defined by
> + bindings of the interconnect provider specified by phandle.
> + This denotes the port to which the interconnect consumer is
> + wired. It is used when there are multiple interconnect providers
> + that have one or multiple links between them.
Go ahead and remove the interconnect-port property description from the
provider part of the binding. It should be sufficient to say,
"interconnect providers can also be interconnect consumers, such as in
the case where two network-on-chip fabrics interface directly".
> +
> +Example:
> +
> + snoc: snoc@0580000 {
> + compatible = "qcom,msm-bus-snoc";
> + reg = <0x580000 0x14000>;
> + #interconnect-cells = <1>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_SNOC_CLK>, <&rpmcc RPM_SMD_SNOC_A_CLK>;
> + status = "okay";
> + interconnect-port = <&bimc MAS_SNOC_CFG>,
> + <&bimc SNOC_BIMC_0_MAS>,
> + <&bimc SNOC_BIMC_1_MAS>,
> + <&pnoc SNOC_PNOC_SLV>;
> + };
> + bimc: bimc@0400000 {
> + compatible = "qcom,msm-bus-bimc";
> + reg = <0x400000 0x62000>;
> + #interconnect-cells = <1>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_BIMC_CLK>, <&rpmcc RPM_SMD_BIMC_A_CLK>;
> + status = "okay";
> + interconnect-port = <&snoc BIMC_SNOC_MAS>;
> + };
> + pnoc: pnoc@500000 {
> + compatible = "qcom,msm-bus-pnoc";
> + reg = <0x500000 0x11000>;
> + #interconnect-cells = <1>;
> + clock-names = "bus_clk", "bus_a_clk";
> + clocks = <&rpmcc RPM_SMD_PCNOC_CLK>, <&rpmcc RPM_SMD_PCNOC_A_CLK>;
> + status = "okay";
> + interconnect-port = <&snoc PNOC_SNOC_SLV>;
> + };
> +
> += interconnect consumers =
> +
> +The interconnect consumers are device nodes which consume the interconnect
> +path(s) provided by the interconnect provider. There can be multiple
> +interconnect providers on a SoC and the consumer may consume multiple paths
> +from different providers depending on usecase and the components it has to
> +interact with.
> +
> +Required-properties:
> +interconnect-port : A phandle and interconnect provider specifier as defined by
> + bindings of the interconnect provider specified by phandle.
> + This denotes the port to which the interconnect consumer is
> + wired.
> +interconnect-path : List of phandles to the data path endpoints.
More copy/paste from February review:
"Path" means everything between the endpoints (e.g. the details of the
graph traversal), whereas this DT property is really only meant to
defint the target endpoint. Let's rename it to interconnect-target.
When referring to endpoints I think we should some pairing terminology
like: src,dst or local,remote or initiator,target.
So how about:
s/interconnect-port/interconnect-sources/
s/interconnect-path/interconnect-targets/
This keeps things symmetrical and the (source,target) pair just makes
sense. I used plural as well since there can be multiple ports.
It might even make sense to shorten it with: source-ports, target-ports
> +interconnect-path-names : List of interconnect path name strings sorted in the
> + same order as the interconnect-path property. Consumers drivers
> + will use interconnect-path-names to match the link names with
> + interconnect specifiers.
Let's not use string names. No reason to copy the clkdev-style of
resource lookups when an integer id will do just fine.
> +
> +Example:
> +
> + sdhci@07864000 {
> + ...
> + interconnect-port = <&pnoc MAS_PNOC_SDCC_2>;
> + interconnect-path = <&blsp1_uart2>;
interconnect-path (err, port-target?) should not point to a consumer
device node, it should point to the local port of the consumer device.
How about:
sdhci@07864000 {
...
interconnect-sources = <&pnoc 123>;
interconnect-targets = <&pnoc 456>, <&snoc 789>;
};
And the magic numbers above (123, 456, 789) can be replaced by
human-readable macros via the DT include chroot. E.g:
interconnect-source = <&pnoc USB_OTG>;
interconnect-target = <&pnoc OMG_WTF>, <&pnoc BBQ>;
> + interconnect-path-names = "spi";
> + };
> diff --git a/Documentation/interconnect/interconnect.txt b/Documentation/interconnect/interconnect.txt
> new file mode 100644
> index 000000000000..051d3955f28b
> --- /dev/null
> +++ b/Documentation/interconnect/interconnect.txt
> @@ -0,0 +1,68 @@
...
> +The interconnect framework provide the following APIs to consumers:
> +
> +struct interconnect_path *interconnect_get(struct device *dev, const char *id);
Replace strings with an integer offset for the port.
> diff --git a/drivers/interconnect/interconnect.c b/drivers/interconnect/interconnect.c
> new file mode 100644
> index 000000000000..dadd1ffdbc50
> --- /dev/null
> +++ b/drivers/interconnect/interconnect.c
> @@ -0,0 +1,285 @@
...
> +struct interconnect_path *interconnect_get(struct device *dev, const char *id)
If the consumer device has more than one local port (e.g. source), it
must be specified along the target port, right?
> +{
> + struct device_node *np;
> + struct platform_device *dst_pdev;
> + struct interconnect_node *src, *dst, *node;
> + struct interconnect_path *path;
> + int ret, index;
> +
> + if (WARN_ON(!dev || !id))
> + return ERR_PTR(-EINVAL);
> +
> + src = find_node(dev->of_node);
> + if (IS_ERR(src))
> + return ERR_CAST(src);
Does this assume that dev only has a single local port?
> +
> + index = of_property_match_string(dev->of_node,
> + "interconnect-path-names", id);
> + if (index < 0) {
> + dev_err(dev, "missing interconnect-path-names DT property on %s\n",
> + dev->of_node->full_name);
> + return ERR_PTR(index);
> + }
> +
> + /* get the destination endpoint device_node */
> + np = of_parse_phandle(dev->of_node, "interconnect-path", index);
> +
> + dst_pdev = of_find_device_by_node(np);
> + if (!dst_pdev) {
> + dev_err(dev, "error finding device by node %s\n", np->name);
> + return ERR_PTR(-ENODEV);
> + }
> +
> + dst = find_node(np);
> + if (IS_ERR(dst))
> + return ERR_CAST(dst);
Some of the above can be simplified by using a symbolic constant integer
instead of a string name for the index.
> diff --git a/include/linux/interconnect-consumer.h b/include/linux/interconnect-consumer.h
> new file mode 100644
> index 000000000000..8bd5bb3e4196
> --- /dev/null
> +++ b/include/linux/interconnect-consumer.h
> @@ -0,0 +1,70 @@
> +/*
> + * Copyright (c) 2017, Linaro Ltd.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _LINUX_INTERCONNECT_CONSUMER_H
> +#define _LINUX_INTERCONNECT_CONSUMER_H
> +
> +struct interconnect_node;
> +
> +/**
> + * struct interconnect_path - interconnect path structure
> + *
> + * @node_list: list of the interconnect nodes
> + * @src_dev: source endpoint
> + * @dst_dev: destination endpoint
> + */
> +struct interconnect_path {
> + struct list_head node_list;
> + struct device *src_dev;
> + struct device *dst_dev;
> +};
Don't expose the definition of interconnect_path to users. They should
only have an opaque handle to the interconnect_path object.
> diff --git a/include/linux/interconnect-provider.h b/include/linux/interconnect-provider.h
> new file mode 100644
> index 000000000000..af1ca739ce52
> --- /dev/null
> +++ b/include/linux/interconnect-provider.h
> @@ -0,0 +1,92 @@
> +/*
> + * Copyright (c) 2017, Linaro Ltd.
> + *
> + * This software is licensed under the terms of the GNU General Public
> + * License version 2, as published by the Free Software Foundation, and
> + * may be copied, distributed, and modified under those terms.
> + *
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> + */
> +
> +#ifndef _LINUX_INTERCONNECT_PROVIDER_H
> +#define _LINUX_INTERCONNECT_PROVIDER_H
> +
> +#include <linux/interconnect-consumer.h>
> +
> +/**
> + * struct icp_ops - platform specific callback operations for interconnect
> + * providers that will be called from drivers
> + *
> + * @set: set constraints on interconnect
> + * @xlate: provider-specific callback for mapping nodes from phandle arguments
> + */
> +struct icp_ops {
> + int (*set)(struct interconnect_node *node, u32 bandwidth);
> + struct interconnect_node *(*xlate)(struct of_phandle_args *spec, void *data);
> +};
> +
> +/**
> + * struct icp - interconnect provider (controller) entity that might
> + * provide multiple interconnect controls
> + *
> + * @icp_list: list of the registered interconnect providers
> + * @nodes: internal list of the interconnect provider nodes
> + * @ops: pointer to device specific struct icp_ops
> + * @dev: the device this interconnect provider belongs to
> + * @of_node: the corresponding device tree node as phandle target
> + * @data: pointer to private data
> + */
> +struct icp {
> + struct list_head icp_list;
> + struct list_head nodes;
> + const struct icp_ops *ops;
> + struct device *dev;
> + const char *name;
> + struct device_node *of_node;
> + void *data;
> +};
Does this need to be defined for provider drivers?
> +
> +/**
> + * struct interconnect_node - entity that is part of the interconnect topology
> + *
> + * @links: links to other interconnect nodes
> + * @num_links: number of interconnect nodes
> + * @icp: points to the interconnect provider struct this node belongs to
> + * @icn_list: list of interconnect nodes
> + * @search_list: list used when walking the nodes graph
> + * @reverse: pointer to previous node when walking the nodes graph
> + * @is_traversed: flag that is used when walking the nodes graph
> + * @qos_list: a list of QoS constraints
> + */
> +struct interconnect_node {
> + struct interconnect_node **links;
> + size_t num_links;
> +
> + struct icp *icp;
> + struct list_head icn_list;
> + struct list_head search_list;
> + struct interconnect_node *reverse;
> + bool is_traversed;
> + struct hlist_head qos_list;
> +};
Don't define this publicly. Should just be declared as an opaque handle.
> +
> +/**
> + * struct icn_qos - constraints that are attached to each node
> + *
> + * @node: linked list node
> + * @path: the interconnect path which is using this constraint
> + * @bandwidth: an integer describing the bandwidth in kbps
> + */
> +struct icn_qos {
> + struct hlist_node node;
> + struct interconnect_path *path;
> + u32 bandwidth;
> +};
Don't define this publicly. Should just be declared as an opaque handle.
Regards,
Mike
> +
> +int interconnect_add_provider(struct icp *icp);
> +int interconnect_del_provider(struct icp *icp);
> +
> +#endif /* _LINUX_INTERCONNECT_PROVIDER_H */
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
