Re: [RFC RESEND] serdev binding for QCA7000 UART driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




Am 13.03.2017 um 17:16 schrieb Stefan Wahren:
> Hi Rob,
>
> since serdev has been merged, i'm currently working on a
> suitable ethernet driver for the QCA7000 [1]. In order to provide a plug
> and play solution for the network interface i suggest the following
> binding, which uses common properties for UART configuration:
>
> * Qualcomm QCA7000 (Ethernet over UART protocol)
>
> Note: The QCA7000 is also useable as a UART slave device.
>
> Required properties:
> - compatible        : Should be "qca,qca7000-uart"
>
> Optional properties:
> - local-mac-address : 6 bytes, Specifies MAC address
> - current-speed     : Specifies current serial device speed in
>                       bits per second (default = 115200)
> - data-bits         : Specifies number of data bits (default = 8)
> - use-parity        : If present, this enables the parity
>                       error detection (default = off)
> - odd-parity        : If present, this specifies that the parity
>                       of each character must be odd (default = even)
>
> Example:
>
> /* Freescale i.MX28 UART */
> auart0: serial@8006a000 {
>     compatible = "fsl,imx28-auart", "fsl,imx23-auart";
>     reg = <0x8006a000 0x2000>;
>     pinctrl-names = "default";
>     pinctrl-0 = <&auart0_2pins_a>;
>     status = "okay";
>
>     qca7000: ethernet {
>         compatible = "qca,qca7000-uart";
>         local-mac-address = [ A0 B0 C0 D0 E0 F0 ];
>         current-speed = <38400>;
>         data-bits = <8>;
>         use-parity;
>         odd-parity;
>     };
> };
>
> Is it okay for you or do you want a different kind of configuration?
> Are there any plans for parity handling?
>
> Thanks
> Stefan
>
> P.S.: Sorry for the broken version
>
> [1] - https://lwn.net/Articles/701225/

gentle ping ...
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux