Re: [PATCH v3 02/11] ARM: sun8i: a33: add all operating points

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Wed, Mar 22, 2017 at 11:31:54AM +0800, Chen-Yu Tsai wrote:
> On Tue, Mar 21, 2017 at 11:36 PM, Quentin Schulz
> <quentin.schulz@xxxxxxxxxxxxxxxxxx> wrote:
> > This adds almost all operating points allowed for the A33 as defined by
> > fex files available at:
> > https://github.com/linux-sunxi/sunxi-boards/tree/master/sys_config/a33
> >
> > There are more possible frequencies in this patch than there are in the
> > fex files because the fex files only give an interval of possible
> > frequencies for a given voltage. All supported frequencies are defined
> > in the original driver code in Allwinner vendor tree.
> >
> > There are two missing frequencies though: 1104MHz and 1200MHz which
> > require the CPU to have 1.32V supplied, which is higher than the default
> > voltage.
> >
> > Without all A33 boards defining the CPU regulator, we cannot have these
> > two frequencies as it would cause the CPU to try to run a higher
> > frequency without "overvolting" which is very likely to crash the CPU.
> >
> > Therefore, these two frequencies must be enabled on a per-board basis.
> >
> > Signed-off-by: Quentin Schulz <quentin.schulz@xxxxxxxxxxxxxxxxxx>
> 
> Acked-by: Chen-Yu Tsai <wens@xxxxxxxx>

Applied, thanks!
Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com

Attachment: signature.asc
Description: PGP signature


[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux