Hi,
On Thu, Mar 16, 2017 at 09:10:12PM -0700, Tony Lindgren wrote:
> Add CPCAP PMIC OTG PHY configuration.
>
> Cc: devicetree@xxxxxxxxxxxxxxx
> Cc: Marcel Partap <mpartap@xxxxxxx>
> Cc: Michael Scott <michael.scott@xxxxxxxxxx>
> Cc: Sebastian Reichel <sre@xxxxxxxxxx>
> Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx>
Reviewed-by: Sebastian Reichel <sre@xxxxxxxxxx>
Tested-by: Sebastian Reichel <sre@xxxxxxxxxx>
-- Sebastian
> ---
> arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
> --- a/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
> +++ b/arch/arm/boot/dts/motorola-cpcap-mapphone.dtsi
> @@ -65,6 +65,29 @@
> interrupts = <23 IRQ_TYPE_NONE>;
> };
>
> + cpcap_usb2_phy: phy {
> + compatible = "motorola,mapphone-cpcap-usb-phy";
> + pinctrl-0 = <&usb_gpio_mux_sel1 &usb_gpio_mux_sel2>;
> + pinctrl-1 = <&usb_ulpi_pins>;
> + pinctrl-2 = <&usb_utmi_pins>;
> + pinctrl-3 = <&uart3_pins>;
> + pinctrl-names = "default", "ulpi", "utmi", "uart";
> + #phy-cells = <0>;
> + interrupts-extended = <
> + &cpcap 15 0 &cpcap 14 0 &cpcap 28 0 &cpcap 19 0
> + &cpcap 18 0 &cpcap 17 0 &cpcap 16 0 &cpcap 49 0
> + &cpcap 48 1
> + >;
> + interrupt-names =
> + "id_ground", "id_float", "se0conn", "vbusvld",
> + "sessvld", "sessend", "se1", "dm", "dp";
> + mode-gpios = <&gpio2 28 GPIO_ACTIVE_HIGH
> + &gpio1 0 GPIO_ACTIVE_HIGH>;
> + io-channels = <&cpcap_adc 2>, <&cpcap_adc 7>;
> + io-channel-names = "vbus", "id";
> + vusb-supply = <&vusb>;
> + };
> +
> led_red: led-red {
> compatible = "motorola,cpcap-led-red";
> vdd-supply = <&sw5>;
> --
> 2.11.1
Attachment:
signature.asc
Description: PGP signature
