this series add support for the pin and gpio controllers present on the Armada 37xx SoCs. Each Armada 37xx SoC comes with 2 pin controllers: one on the south bridge (managing 28 pins) and one on the north bridge (managing 36 pins). At the hardware level the controller configure the pins by group and not pin by pin. The gpio controller is also capable to handle interrupt from gpio. Gregory Gregory CLEMENT (7): pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers arm64: marvell: enable the Armada 37xx pinctrl driver pinctrl: armada-37xx: Add pin controller support for Armada 37xx pinctrl: armada-37xx: Add gpio support pinctrl: aramda-37xx: Add irqchip support ARM64: dts: marvell: Add pinctrl nodes for Armada 3700 ARM64: dts: marvell: armada37xx: add pinctrl definition Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt | 7 +- Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt | 143 +++++++++++- arch/arm64/Kconfig.platforms | 2 +- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 8 +- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 71 +++++- drivers/pinctrl/Makefile | 2 +- drivers/pinctrl/mvebu/Kconfig | 7 +- drivers/pinctrl/mvebu/Makefile | 3 +- drivers/pinctrl/mvebu/pinctrl-armada-37xx.c | 918 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 9 files changed, 1153 insertions(+), 8 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt create mode 100644 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c base-commit: c1ae3cfa0e89fa1a7ecc4c99031f5e9ae99d9201 -- git-series 0.9.1 -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
