Re: [v3 3/5] coresight: add support for debug module

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 21/03/17 02:59, Leo Yan wrote:
On Mon, Mar 20, 2017 at 10:40:00AM -0600, Mathieu Poirier wrote:

[...]

If we don't check for "nohlt" some platform may freeze, others may work.
If we
mandate that "nohlt" be present on the kernel cmd line it works in all
cases.
As such mandating that "nohlt" be present is a better way to go.


Sure, so I will add below checking code in the probe function, please
let me know if you have alter better way to implement this:

+       if (IS_ENABLED(CONFIG_CPU_IDLE) &&
+                       !strstr(boot_command_line, "nohlt")) {
+               dev_err(dev, "May not be accessible in CPU power
domain.\n");
+               return -EPERM;
+       }


There is an API which kind of achieves what "nohlt" does at runtime :

  cpu_idle_poll_ctrl(true)

So may be we could use that instead of depending on "nohlt". The other side
of the issues is "when do we decide to use the API". May be we could add
something
like : enable_debug, which could then trigger the panic notifier
registrations
and the above. That would still leave us with a case where the system
crashes
even before the user gets a terminal. May be the following is the best
option :

1) Dedicated kernel command line parameter for enabling the CPU debug at
boot/probe.

and

2) Runtime enable method via sysfs.

What do you think ?

In my opinion booting with "nohlt" on the cmd line is sufficient to
determine if we should use the driver or not.  That way we also avoid
declaring yet another sysfs flag, something I really want to avoid.

Agree.

I did spend some time to implement coresight core framework to support
debug module, you could see it on:http://termbin.com/k2fj; this also
gives me more sense which is better choice. If declaring another sysfs
flag to support debug module in coresight framework, this lets the
codes and interfaces more complex. E.g. for best fit into coresight
framework, finally we can get 8 sysfs nodes for 8 CPUs in system; so
that means we need enable every CPU one by one.

Having a node for each debug area indeed doesn't look good. We could
as will stick a single node under /sys/kernel/debug/ which would enable/disable
the debug component.

I am OK with it being tied to nohlt. In that case we will have to add
a Kconfig dependency on GENERIC_IDLE_POLL_SETUP (though it is selected
by default on ARM/ARM64). Parsing the boot command line for nohlt doesn't
look like a good idea. We may have to figure out a way to do that. Also,
please could you add support for building this as a module ? Since it
doesn't depend on the coresight bus anyway, it should be pretty straight
forward.

Suzuki
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux