Just thought people might find this useful. I think at this point it might be working from linux-next as well. Where do I e-mail updated DT bindings to? On Sun, 2017-03-19 at 08:25 -0700, Michael Zoran wrote: > So this morning after testing a new firmware release for the RPI, I > was > able to get minecraft_pi on ARM 64 to work on Raspbian when built > from > the upstream staging-testing tree. > > I'm including the DT I used for testing. The firmware creates the > simplefb node that it's been doing for testing on the RPI 3 for a > very > long time now. > > The only issue is that it appears for now you will need to hard code > your display settings in config.txt and you will need to set > gpu_mem=128 or something reasonable just like most people would do in > Raspbian. > > The lastest firmware for the RPI is available at:(Where updates are > always available) > https://github.com/raspberrypi/firmware > > This is the replacement for arch/arm64/boot/dts/broadcom/bcm2837-rpi- > 3- > b.dts > > /dts-v1/; > #include "bcm2837.dtsi" > #include "bcm2835-rpi.dtsi" > #include "bcm283x-rpi-smsc9514.dtsi" > #include "bcm283x-rpi-usb-host.dtsi" > > / { > compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; > model = "Raspberry Pi 3 Model B"; > > memory { > reg = <0 0x40000000>; > }; > > leds { > act { > gpios = <&gpio 47 0>; > }; > }; > > > soc { > > hvs@7e400000 { > status = "disabled"; > }; > > v3d: v3d@7ec00000 { > status = "disabled"; > }; > > vc4: gpu { > status = "disabled"; > }; > > fb: fb { > status = "disabled"; > }; > > vchiq: vchiq { > compatible = "brcm,bcm2835-vchiq"; > reg = <0x7e00b840 0xf>; > interrupts = <0 2>; > cache-line-size = <32>; > firmware = <&firmware>; > }; > > audio: audio { > compatible = "brcm,bcm2835-audio"; > brcm,pwm-channels = <8>; > }; > > }; > > __overrides__ { > cache_line_size = <&vchiq>, "cache-line-size:0"; > }; > > }; > > &uart1 { > status = "okay"; > }; -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
