* Sebastian Reichel <sre@xxxxxxxxxx> [170318 18:31]: > Hi, > > On Sat, Mar 04, 2017 at 09:43:59PM -0800, Tony Lindgren wrote: > > The LCD panel on droid 4 is a command mode LCD. The binding follows > > the standard omapdrm binding and the changes needed for omapdrm command > > mode panels are posted separately. > > > > Cc: devicetree@xxxxxxxxxxxxxxx > > Cc: Marcel Partap <mpartap@xxxxxxx> > > Cc: Michael Scott <michael.scott@xxxxxxxxxx> > > Cc: Sebastian Reichel <sre@xxxxxxxxxx> > > Cc: Tomi Valkeinen <tomi.valkeinen@xxxxxx> > > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> > > Tested-By: Sebastian Reichel <sre@xxxxxxxxxx> > > With a non-modular kernel lcd is not working with omapdrm if HDMI > is enabled. After dropping HDMI in droid4's dts file everything > worked as expected. I assume both work properly with a modular > kernel? Yes with loadable modules both work just fine. If things do not work properly as built-in, chances are there's some unhandled dependency that needs -EPROBE_DEFER somewhere for a regulator or a clock. Regards, Tony -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
