On Sun, Mar 19, 2017 at 03:57:56PM +0200, Vladimir Zapolskiy wrote: > Hi Russell, > > On 03/18/2017 10:43 PM, Russell King - ARM Linux wrote: > > On Sat, Mar 18, 2017 at 12:58:27PM -0700, Steve Longerbeam wrote: > >> Can you share your gstreamer pipeline? For now, until > >> VIDIOC_ENUM_FRAMESIZES is implemented, try a pipeline that > >> does not attempt to specify a frame rate. I use the attached > >> script for testing, which works for me. > > > > It's nothing more than > > > > gst-launch-1.0 -v v4l2src ! <any needed conversions> ! xvimagesink > > > > in my case, the conversions are bayer2rgbneon. However, this only shows > > you the frame rate negotiated on the pads (which is actually good enough > > to show the issue.) > > I'm sorry for potential offtopic, but is bayer2rgbneon element found in > any officially supported by GStreamer plugin? No it isn't. Google is wonderful, please make use of planetary search facilities. > Can it be a point of failure? There's a good reason why I dumped a full debug log using GST_DEBUG=*:9, analysed it for the cause of the failure, and tried several different pipelines, including the standard bayer2rgb plugin. Please don't blame this on random stuff after analysis of the logs _and_ reading the appropriate plugin code has shown where the problem is. I know gstreamer can be very complex, but it's very possible to analyse the cause of problems and pin them down with detailed logs in conjunction with the source code. -- RMK's Patch system: http://www.armlinux.org.uk/developer/patches/ FTTC broadband for 0.8mile line: currently at 9.6Mbps down 400kbps up according to speedtest.net. -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
