Hi, On Tue, Mar 14, 2017 at 05:40:33PM -0700, Tony Lindgren wrote: > Droid 4 has two modems, mdm6600 and w3glte. Both are on the HCI USB > controller. > > Let's add a configuration for the HCI so the modems can be enabled. > > Note that the modems still need GPIO based configuration that can > be done with the test-d4-echi shell script I've posted to: > > http://muru.com/linux/d4/test-d4-ehci > > Cc: devicetree@xxxxxxxxxxxxxxx > Cc: Marcel Partap <mpartap@xxxxxxx> > Cc: Michael Scott <michael.scott@xxxxxxxxxx> > Cc: Sebastian Reichel <sre@xxxxxxxxxx> > Signed-off-by: Tony Lindgren <tony@xxxxxxxxxxx> Tested-by: Sebastian Reichel <sre@xxxxxxxxxx> -- Sebastian > --- > arch/arm/boot/dts/omap4-droid4-xt894.dts | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/arch/arm/boot/dts/omap4-droid4-xt894.dts b/arch/arm/boot/dts/omap4-droid4-xt894.dts > --- a/arch/arm/boot/dts/omap4-droid4-xt894.dts > +++ b/arch/arm/boot/dts/omap4-droid4-xt894.dts > @@ -71,6 +71,11 @@ > regulator-always-on; > }; > > + /* HS USB Host PHY on PORT 1 */ > + hsusb1_phy: hsusb1_phy { > + compatible = "usb-nop-xceiv"; > + }; > + > /* LCD regulator from sw5 source */ > lcd_regulator: regulator-lcd { > compatible = "regulator-fixed"; > @@ -475,6 +480,15 @@ > &omap4_pmx_core 0x17c>; > }; > > +&usbhsehci { > + phys = <&hsusb1_phy>; > +}; > + > +&usbhshost { > + port1-mode = "ohci-phy-4pin-dpdm"; > + port2-mode = "ehci-tll"; > +}; > + > /* Internal UTMI+ PHY used for OTG, CPCAP ULPI PHY for detection and charger */ > &usb_otg_hs { > interface-type = <1>; > -- > 2.11.1 > -- > To unsubscribe from this list: send the line "unsubscribe linux-omap" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html
Attachment:
signature.asc
Description: PGP signature
