Hi Russell,
On 03/14/2017 10:29 AM, Steve Longerbeam wrote:
On 03/12/2017 02:09 PM, Russell King - ARM Linux wrote:
On Sun, Mar 12, 2017 at 08:40:37PM +0000, Russell King - ARM Linux
wrote:
On Sun, Mar 12, 2017 at 01:36:32PM -0700, Steve Longerbeam wrote:
But hold on, if my logic is correct, then why did the CSI power-off
get reached in your case, multiple times? Yes I think there is a bug,
link_notify() is not checking if the link has already been disabled.
I will fix this. But I'm surprised media core's link_notify handling
doesn't do this.
Well, I think there's something incredibly fishy going on here. I
turned that dev_dbg() at the top of the function into a dev_info(),
and I get:
root@hbi2ex:~# dmesg |grep -A2 imx-ipuv3-csi
[ 53.370949] imx-ipuv3-csi imx-ipuv3-csi.0: power OFF
[ 53.371015] ------------[ cut here ]------------
[ 53.371075] WARNING: CPU: 0 PID: 1515 at
drivers/staging/media/imx/imx-media-csi.c:806 csi_s_power+0xb8/0xd0
[imx_media_csi]
--
[ 53.372624] imx-ipuv3-csi imx-ipuv3-csi.0: power OFF
[ 53.372637] ------------[ cut here ]------------
[ 53.372663] WARNING: CPU: 0 PID: 1515 at
drivers/staging/media/imx/imx-media-csi.c:806 csi_s_power+0xb8/0xd0
[imx_media_csi]
There isn't a power on event being generated before these two power
off events. I don't see a power on event even when I attempt to
start streaming either (which fails due to the lack of bayer
support.)
Found it - my imx219 driver returns '1' from its s_power function when
powering up, which triggers a bug in your code - when
imx_media_set_power()
fails to power up, you call imx_media_set_power() telling it to power
everything off - including devices that are already powered off.
Yep, there's a bug in the error cleanup in
imx_media_pipeline_set_power().
On error, it needs to backout by calling s_power(off) as it is doing,
but not
through the whole pipeline, but needs to stop at the subdev encountered
just before the subdev that failed. This was causing the s_power()
imbalance.
I will fix.
Due to some fixes to ov5640 from version 4, v4l2_pipeline_pm APIs are
working
now, so I've removed imx_media_pipeline_set_power() and switched to
v4l2_pipeline_pm_use() in capture device open/release and
v4l2_pipeline_link_notify()
in imx_media_link_notify(), for the pipeline power management.
Steve
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
