On Wed, Mar 15, 2017 at 08:13:54AM -0700, Tim Harvey wrote: > The Gateworks Ventana GW5904 is a single-board computer based on the NXP > IMX6 SoC with the following features: > * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q) > * 2048MB DDR3 DRAM (4x64bit) (options up to 4GiB) > * 8GB eMMC > * Gateworks System Controller: > - hardware watchdog > - hardware monitor > - pushbutton controller > - EEPROM storage > - power control > * JTAG programmable > * 1x miniPCIe socket (with PCIe, USB) > * 1x miniPCIe socket (USB) > * 1x M.2 socket (USB, 2x SIM) > * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag) > * GPS (optional uBlox EVA-M8M) > * Application headers: > - 2x RS232 UART (TX/RX/CTS/RTS) > - 8x TTL GPIO (3x configurable as PWM) > - 1x LVDS display 3D+C with i2c touch and PWM backlight > * MV88E6176 GbE Switch (uplink to IMX FEC) > * Front panel connectors: > - 1x user programmable LED > - 1x configurable user pushbutton > - 1x USB OTG > - 4x GbE LAN > > Signed-off-by: Tim Harvey <tharvey@xxxxxxxxxxxxx> > --- > v2: > - updated switch to latest dsa bindings > - update to GPL/X11 dual license > - use stdout-path instead of bootargs > - sort devices under i2c by address > - fix node/label name on touchscreen node > - removed unnecessary status okay for pps node > - removed unnecessary container node in iomuxc > - replaced deprecated fsl,uart-has-rtscts with uart-has-rtscts > --- > arch/arm/boot/dts/Makefile | 2 + > arch/arm/boot/dts/imx6dl-gw5904.dts | 19 + > arch/arm/boot/dts/imx6q-gw5904.dts | 23 ++ > arch/arm/boot/dts/imx6qdl-gw5904.dtsi | 641 ++++++++++++++++++++++++++++++++++ > 4 files changed, 685 insertions(+) > create mode 100644 arch/arm/boot/dts/imx6dl-gw5904.dts > create mode 100644 arch/arm/boot/dts/imx6q-gw5904.dts > create mode 100644 arch/arm/boot/dts/imx6qdl-gw5904.dtsi > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index ccecd79..7843b65 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -352,6 +352,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6dl-gw551x.dtb \ > imx6dl-gw552x.dtb \ > imx6dl-gw553x.dtb \ > + imx6dl-gw5904.dtb \ > imx6dl-hummingboard.dtb \ > imx6dl-icore.dtb \ > imx6dl-icore-rqs.dtb \ > @@ -395,6 +396,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \ > imx6q-gw551x.dtb \ > imx6q-gw552x.dtb \ > imx6q-gw553x.dtb \ > + imx6q-gw5904.dtb \ > imx6q-h100.dtb \ > imx6q-hummingboard.dtb \ > imx6q-icore.dtb \ > diff --git a/arch/arm/boot/dts/imx6dl-gw5904.dts b/arch/arm/boot/dts/imx6dl-gw5904.dts > new file mode 100644 > index 0000000..2318a55 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6dl-gw5904.dts > @@ -0,0 +1,19 @@ > +/* > + * Copyright 2017 Gateworks Corporation > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ > + > +/dts-v1/; > +#include "imx6dl.dtsi" > +#include "imx6qdl-gw5904.dtsi" > + > +/ { > + model = "Gateworks Ventana i.MX6 DualLite/Solo GW5904"; > + compatible = "gw,imx6dl-gw5904", "gw,ventana", "fsl,imx6dl"; > +}; > diff --git a/arch/arm/boot/dts/imx6q-gw5904.dts b/arch/arm/boot/dts/imx6q-gw5904.dts > new file mode 100644 > index 0000000..357dd7e > --- /dev/null > +++ b/arch/arm/boot/dts/imx6q-gw5904.dts > @@ -0,0 +1,23 @@ > +/* > + * Copyright 2017 Gateworks Corporation > + * > + * The code contained herein is licensed under the GNU General Public > + * License. You may obtain a copy of the GNU General Public License > + * Version 2 or later at the following locations: > + * > + * http://www.opensource.org/licenses/gpl-license.html > + * http://www.gnu.org/copyleft/gpl.html > + */ You want to use the same licence as imx6qdl-gw5904.dtsi for above two files, don't you? > + > +/dts-v1/; > +#include "imx6q.dtsi" > +#include "imx6qdl-gw5904.dtsi" > + > +/ { > + model = "Gateworks Ventana i.MX6 Dual/Quad GW5904"; > + compatible = "gw,imx6q-gw5904", "gw,ventana", "fsl,imx6q"; > +}; > + > +&sata { > + status = "okay"; > +}; > diff --git a/arch/arm/boot/dts/imx6qdl-gw5904.dtsi b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi > new file mode 100644 > index 0000000..ed1fa97 > --- /dev/null > +++ b/arch/arm/boot/dts/imx6qdl-gw5904.dtsi > @@ -0,0 +1,641 @@ > +/* > + * Copyright 2017 Gateworks Corporation > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of > + * the License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * You should have received a copy of the GNU General Public > + * License along with this file; if not, write to the Free > + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, > + * MA 02110-1301 USA > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + /* these are used by bootloader for disabling nodes */ > + aliases { > + led0 = &led0; > + led1 = &led1; > + led2 = &led2; > + usb0 = &usbh1; > + usb1 = &usbotg; > + }; > + > + chosen { > + stdout-path = &uart2; > + }; > + > + backlight { > + compatible = "pwm-backlight"; > + pwms = <&pwm4 0 5000000>; > + brightness-levels = <0 4 8 16 32 64 128 255>; > + default-brightness-level = <7>; > + }; > + > + leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_leds>; > + > + led0: user1 { > + label = "user1"; > + gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDG */ > + default-state = "on"; > + linux,default-trigger = "heartbeat"; > + }; > + > + led1: user2 { > + label = "user2"; > + gpios = <&gpio4 7 GPIO_ACTIVE_HIGH>; /* MX6_PANLEDR */ > + default-state = "off"; > + }; > + > + led2: user3 { > + label = "user3"; > + gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; /* MX6_LOCLED# */ > + default-state = "off"; > + }; > + }; > + > + memory { > + reg = <0x10000000 0x40000000>; > + }; > + > + pps { > + compatible = "pps-gpio"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pps>; > + gpios = <&gpio1 26 GPIO_ACTIVE_HIGH>; > + }; > + > + reg_1p0v: regulator-1p0v { > + compatible = "regulator-fixed"; > + regulator-name = "1P0V"; > + regulator-min-microvolt = <1000000>; > + regulator-max-microvolt = <1000000>; > + regulator-always-on; > + }; > + > + reg_3p3v: regulator-3p3v { > + compatible = "regulator-fixed"; > + regulator-name = "3P3V"; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + regulator-always-on; > + }; > + > + reg_usb_h1_vbus: regulator-usb-h1-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usb_h1_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + regulator-always-on; > + }; > + > + reg_usb_otg_vbus: regulator-usb-otg-vbus { > + compatible = "regulator-fixed"; > + regulator-name = "usb_otg_vbus"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + gpio = <&gpio3 22 GPIO_ACTIVE_HIGH>; > + enable-active-high; > + }; > +}; > + > +&clks { > + assigned-clocks = <&clks IMX6QDL_CLK_LDB_DI0_SEL>, > + <&clks IMX6QDL_CLK_LDB_DI1_SEL>; > + assigned-clock-parents = <&clks IMX6QDL_CLK_PLL3_USB_OTG>, > + <&clks IMX6QDL_CLK_PLL3_USB_OTG>; > +}; > + > +&fec { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_enet>; > + phy-mode = "rgmii-id"; > + status = "okay"; > + > + fixed-link { > + speed = <1000>; > + full-duplex; > + }; > + > + mdio { > + #address-cells = <1>; > + #size-cells = <0>; > + > + switch0@0 { switch@0 > + compatible = "marvell,mv88e6085"; > + #address-cells = <1>; > + #size-cells = <0>; > + reg = <0>; > + > + ports { > + #address-cells = <1>; > + #size-cells = <0>; > + > + port@0 { > + reg = <0>; > + label = "lan4"; > + }; > + > + port@1 { > + reg = <1>; > + label = "lan3"; > + }; > + > + port@2 { > + reg = <2>; > + label = "lan2"; > + }; > + > + port@3 { > + reg = <3>; > + label = "lan1"; > + }; > + > + port@5 { > + reg = <5>; > + label = "cpu"; > + ethernet = <&fec>; > + }; > + }; > + }; > + }; > +}; > + > +&i2c1 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c1>; > + status = "okay"; > + > + gpio: pca9555@23 { Node name should be generic while label can be specific. That said, switching the names between node and label looks better: pca9555: gpio@23 { > + compatible = "nxp,pca9555"; > + reg = <0x23>; > + gpio-controller; > + #gpio-cells = <2>; > + }; > + > + eeprom1: eeprom@50 { > + compatible = "atmel,24c02"; > + reg = <0x50>; > + pagesize = <16>; > + }; > + > + eeprom2: eeprom@51 { > + compatible = "atmel,24c02"; > + reg = <0x51>; > + pagesize = <16>; > + }; > + > + eeprom3: eeprom@52 { > + compatible = "atmel,24c02"; > + reg = <0x52>; > + pagesize = <16>; > + }; > + > + eeprom4: eeprom@53 { > + compatible = "atmel,24c02"; > + reg = <0x53>; > + pagesize = <16>; > + }; > + > + rtc: ds1672@68 { ds1672: rtc@68 { > + compatible = "dallas,ds1672"; > + reg = <0x68>; > + }; > +}; > + > +&i2c2 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c2>; > + status = "okay"; > + > + ltc3676: pmic@3c { > + compatible = "lltc,ltc3676"; > + reg = <0x3c>; > + interrupt-parent = <&gpio1>; > + interrupts = <8 IRQ_TYPE_EDGE_FALLING>; > + > + regulators { > + /* VDD_SOC (1+R1/R2 = 1.635) */ > + reg_vdd_soc: sw1 { > + regulator-name = "vddsoc"; > + regulator-min-microvolt = <674400>; > + regulator-max-microvolt = <1308000>; > + lltc,fb-voltage-divider = <127000 200000>; > + regulator-ramp-delay = <7000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_1P8 (1+R1/R2 = 2.505): GbE switch */ > + reg_1p8v: sw2 { > + regulator-name = "vdd1p8"; > + regulator-min-microvolt = <1033310>; > + regulator-max-microvolt = <2004000>; > + lltc,fb-voltage-divider = <301000 200000>; > + regulator-ramp-delay = <7000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_ARM (1+R1/R2 = 1.635) */ > + reg_vdd_arm: sw3 { > + regulator-name = "vddarm"; > + regulator-min-microvolt = <674400>; > + regulator-max-microvolt = <1308000>; > + lltc,fb-voltage-divider = <127000 200000>; > + regulator-ramp-delay = <7000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_DDR (1+R1/R2 = 2.105) */ > + reg_vdd_ddr: sw4 { > + regulator-name = "vddddr"; > + regulator-min-microvolt = <868310>; > + regulator-max-microvolt = <1684000>; > + lltc,fb-voltage-divider = <221000 200000>; > + regulator-ramp-delay = <7000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_2P5 (1+R1/R2 = 3.435): PCIe/ENET-PHY */ > + reg_2p5v: ldo2 { > + regulator-name = "vdd2p5"; > + regulator-min-microvolt = <2490375>; > + regulator-max-microvolt = <2490375>; > + lltc,fb-voltage-divider = <487000 200000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + > + /* VDD_HIGH (1+R1/R2 = 4.17) */ > + reg_3p0v: ldo4 { > + regulator-name = "vdd3p0"; > + regulator-min-microvolt = <3023250>; > + regulator-max-microvolt = <3023250>; > + lltc,fb-voltage-divider = <634000 200000>; > + regulator-boot-on; > + regulator-always-on; > + }; > + }; > + }; > +}; > + > +&i2c3 { > + clock-frequency = <100000>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_i2c3>; > + status = "okay"; > + > + egalax_ts: touchscreen@04 { Drop the leading zeros in unit-address. Shawn > + compatible = "eeti,egalax_ts"; > + reg = <0x04>; > + interrupt-parent = <&gpio1>; > + interrupts = <11 IRQ_TYPE_EDGE_FALLING>; > + wakeup-gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; > + }; > +}; > + > +&ldb { > + status = "okay"; > + > + lvds-channel@0 { > + fsl,data-mapping = "spwg"; > + fsl,data-width = <18>; > + status = "okay"; > + > + display-timings { > + native-mode = <&timing0>; > + timing0: hsd100pxn1 { > + clock-frequency = <65000000>; > + hactive = <1024>; > + vactive = <768>; > + hback-porch = <220>; > + hfront-porch = <40>; > + vback-porch = <21>; > + vfront-porch = <7>; > + hsync-len = <60>; > + vsync-len = <10>; > + }; > + }; > + }; > +}; > + > +&pcie { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pcie>; > + reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>; > + status = "okay"; > +}; > + > +&pwm2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */ > + status = "disabled"; > +}; > + > +&pwm3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */ > + status = "disabled"; > +}; > + > +&pwm4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_pwm4>; > + status = "okay"; > +}; > + > +&uart1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart1>; > + status = "okay"; > +}; > + > +&uart2 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart2>; > + status = "okay"; > +}; > + > +&uart3 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart3>; > + uart-has-rtscts; > + status = "okay"; > +}; > + > +&uart4 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart4>; > + uart-has-rtscts; > + status = "okay"; > +}; > + > +&uart5 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_uart5>; > + status = "okay"; > +}; > + > +&usbotg { > + vbus-supply = <®_usb_otg_vbus>; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_usbotg>; > + disable-over-current; > + status = "okay"; > +}; > + > +&usbh1 { > + vbus-supply = <®_usb_h1_vbus>; > + status = "okay"; > +}; > + > +&usdhc3 { > + pinctrl-names = "default", "state_100mhz", "state_200mhz"; > + pinctrl-0 = <&pinctrl_usdhc3>; > + pinctrl-1 = <&pinctrl_usdhc3_100mhz>; > + pinctrl-2 = <&pinctrl_usdhc3_200mhz>; > + non-removable; > + vmmc-supply = <®_3p3v>; > + keep-power-in-suspend; > + status = "okay"; > +}; > + > +&wdog1 { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_wdog>; > + fsl,ext-reset-output; > +}; > + > +&iomuxc { > + pinctrl_enet: enetgrp { > + fsl,pins = < > + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 > + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030 > + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030 > + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 > + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 > + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030 > + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030 > + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 > + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 > + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 > + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 > + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 > + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 > + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 > + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 > + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 > + MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x4001b0b0 /* PHY_RST# */ > + >; > + }; > + > + pinctrl_gpio_leds: gpioledsgrp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 > + MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0 > + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 > + >; > + }; > + > + pinctrl_i2c1: i2c1grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1 > + MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c2: i2c2grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 > + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_i2c3: i2c3grp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 > + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 > + >; > + }; > + > + pinctrl_pcie: pciegrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */ > + >; > + }; > + > + pinctrl_pmic: pmicgrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x1b0b0 /* PMIC_IRQ# */ > + >; > + }; > + > + pinctrl_pps: ppsgrp { > + fsl,pins = < > + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm2: pwm2grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm3: pwm3grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_pwm4: pwm4grp { > + fsl,pins = < > + MX6QDL_PAD_SD1_CMD__PWM4_OUT 0x1b0b1 > + >; > + }; > + > + pinctrl_uart1: uart1grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart2: uart2grp { > + fsl,pins = < > + MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1 > + MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_uart3: uart3grp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D23__UART3_CTS_B 0x1b0b1 > + MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1 > + MX6QDL_PAD_EIM_D31__UART3_RTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_uart4: uart4grp { > + fsl,pins = < > + MX6QDL_PAD_CSI0_DAT12__UART4_TX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT13__UART4_RX_DATA 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT16__UART4_RTS_B 0x1b0b1 > + MX6QDL_PAD_CSI0_DAT17__UART4_CTS_B 0x1b0b1 > + >; > + }; > + > + pinctrl_uart5: uart5grp { > + fsl,pins = < > + MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1 > + MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1 > + >; > + }; > + > + pinctrl_usbotg: usbotggrp { > + fsl,pins = < > + MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059 > + MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* PWR_EN */ > + MX6QDL_PAD_KEY_COL4__GPIO4_IO14 0x1b0b0 /* OC */ > + >; > + }; > + > + pinctrl_usdhc3: usdhc3grp { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x10059 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x17059 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x17059 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x17059 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x17059 > + >; > + }; > + > + pinctrl_usdhc3_100mhz: usdhc3grp100mhz { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170b9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100b9 > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x100b9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170b9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170b9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170b9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170b9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170b9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170b9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170b9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170b9 > + >; > + }; > + > + pinctrl_usdhc3_200mhz: usdhc3grp200mhz { > + fsl,pins = < > + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x170f9 > + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x100f9 > + MX6QDL_PAD_SD3_RST__SD3_RESET 0x100f9 > + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x170f9 > + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x170f9 > + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x170f9 > + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x170f9 > + MX6QDL_PAD_SD3_DAT4__SD3_DATA4 0x170f9 > + MX6QDL_PAD_SD3_DAT5__SD3_DATA5 0x170f9 > + MX6QDL_PAD_SD3_DAT6__SD3_DATA6 0x170f9 > + MX6QDL_PAD_SD3_DAT7__SD3_DATA7 0x170f9 > + >; > + }; > + > + pinctrl_wdog: wdoggrp { > + fsl,pins = < > + MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0 > + >; > + }; > +}; > -- > 2.7.4 > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
