On Wed, Mar 08, 2017 at 07:22:56PM +0100, Martin Kaiser wrote: > Allow setting the AUS mode for a display from the device tree. > Use an optional boolean property. AUS mode can be set only on imx21 > and compatible chipsets. > > Signed-off-by: Martin Kaiser <martin@xxxxxxxxx> > --- > v3: > use a boolean DT property instead of the register value > separate patches for DT binding and code changes > > v2: > re-sending DT bindings and code changes as one patch > > Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt | 2 ++ > 1 file changed, 2 insertions(+) > > diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt > index 7a5c0e2..cacae0e 100644 > --- a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt > +++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt > @@ -13,6 +13,8 @@ Required nodes: > Additional, the display node has to define properties: > - bits-per-pixel: Bits per pixel > - fsl,pcr: LCDC PCR value > + A display node may optionally define > + - fsl,aus_mode: boolean to enable AUS mode (only for imx21) fsl,aus-mode With that, Acked-by: Rob Herring <robh@xxxxxxxxxx> -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
