On Tue, Mar 14, 2017 at 02:59:35PM +0000, Lee Jones wrote: > On Mon, 06 Mar 2017, Charles Keepax wrote: > > > Add a device tree binding document for the wm831x series of PMICs. > > Currently only support for the registering the device and the GPIOs are > > actually implemented in the driver. > > > > Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx> > > --- > > > > Changes since v2: > > - Flesh the binding some more with some additional features of the device, > > although these are not yet implemented in the code. > > > > Documentation/devicetree/bindings/mfd/wm831x.txt | 81 ++++++++++++++++++++++++ > > MAINTAINERS | 1 + > > 2 files changed, 82 insertions(+) > > create mode 100644 Documentation/devicetree/bindings/mfd/wm831x.txt > > > > diff --git a/Documentation/devicetree/bindings/mfd/wm831x.txt b/Documentation/devicetree/bindings/mfd/wm831x.txt > > new file mode 100644 > > index 0000000..680ac18 > > --- /dev/null > > +++ b/Documentation/devicetree/bindings/mfd/wm831x.txt > > @@ -0,0 +1,81 @@ > > +Cirrus Logic/Wolfson Microelectronics wm831x PMICs > > + > > +System PMICs with a wide range of additional features. > > + > > +Required properties: > > + > > + - compatible : One of the following chip-specific strings: > > + "wlf,wm8310" > > + "wlf,wm8311" > > + "wlf,wm8312" > > + "wlf,wm8320" > > + "wlf,wm8321" > > + "wlf,wm8325" > > + "wlf,wm8326" > > + > > + - reg : I2C slave address when connected using I2C, chip select number > > + when using SPI. > > + > > + - gpio-controller : Indicates this device is a GPIO controller. > > + - #gpio-cells : Must be 2. The first cell is the pin number and the > > + second cell is used to specify optional parameters (currently unused). > > Then why not "must be 1", if the second cell is unused? > I believe it is generally advised to use at least 2 cells for GPIOs and since there is a reasonable chance someone might add flags later seems better have it in the binding already. > > + - interrupts : The interrupt line the /IRQ signal for the device is > > + connected to. > > What's with the '/'? Active low, but will remove. > > > + - interrupt-parent : The parent interrupt controller. > > + > > + - interrupt-controller : wm831x devices contain interrupt controllers and > > + may provide interrupt services to other devices. > > + - #interrupt-cells: Must be 2. The first cell is the IRQ number, and the > > + second cell is the flags, encoded as the trigger masks from > > + Documentation/devicetree/bindings/interrupt-controller/interrupts.txt > > Please use the succinct "../../" format. Can do. Thanks, Charles -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
