Re: [PATCH 2/4] ARM: dts: dm8168-evm: add the external reference clock for SATA

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




2017-03-13 22:34 GMT+01:00 Tony Lindgren <tony@xxxxxxxxxxx>:
> * Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> [170313 09:45]:
>> This board has an external oscillator supplying the reference clock
>> signal for SATA. Its rate is fixed at 100Mhz. Add a corresponding
>> device tree node.
>
> Is this the 100MHz clock from PCIe? Just like on dm814x-evm as noted
> in the workaround thread below:
>
> http://e2e.ti.com/support/dsp/davinci_digital_media_processors/f/716/p/181083/671141
>
> Regards,
>
> Tony
>

Hi Tony,

these signals come from a TI CDCM61002 (U30 on the board's
schematics). It's hardwired to 100mHZ output.

Thanks,
Bartosz Golaszewski
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux