On 03/14/2017 09:57 AM, Sergei Shtylyov wrote: > Hello! > > On 3/13/2017 7:36 PM, Bartosz Golaszewski wrote: > >> This SATA controller is quite similar to the one present on the DA850 >> SoC, but the PHY configuration is different and it supports two HBA >> ports. >> >> The IP suffers from the same PMP issue the DA850 does - if we enable >> PMP but don't use it - softreset fails. Appropriate workaround was >> implemented in this driver as well. >> >> Signed-off-by: Bartosz Golaszewski <bgolaszewski@xxxxxxxxxxxx> >> --- >> drivers/ata/Kconfig | 9 +++ >> drivers/ata/Makefile | 1 + >> drivers/ata/ahci_dm816.c | 200 +++++++++++++++++++++++++++++++++++++++++++++++ >> 3 files changed, 210 insertions(+) >> create mode 100644 drivers/ata/ahci_dm816.c >> >> diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig >> index 70b57d2..7f59a7a 100644 >> --- a/drivers/ata/Kconfig >> +++ b/drivers/ata/Kconfig >> @@ -118,6 +118,15 @@ config AHCI_DA850 >> >> If unsure, say N. >> >> +config AHCI_DM816 >> + tristate "DaVinci DM816 AHCI SATA support" > > Is it really DaVinci? > >> + depends on ARCH_OMAP2PLUS > > Especially if it depends on OMAP... Hi Sergei, Yes it's a DaVinci family SoC, but shares a lot of IPs with the OMAP family. Neil > > [...] > > MBR, Sergei > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
