On Mon, Mar 13, 2017 at 08:15:27PM +0100, Rafa?? Mi??ecki wrote:
> On 03/13/2017 08:14 PM, Andrew Lunn wrote:
> >On Mon, Mar 13, 2017 at 07:48:26PM +0100, Rafa?? Mi??ecki wrote:
> >>On 03/12/2017 06:10 PM, Andrew Lunn wrote:
> >>>>+ chosen {
> >>>>+ bootargs = "console=ttyS0,115200 earlycon";
> >>>
> >>>Using bootargs to pass the serial settings has been deprecated for a
> >>>while. Please use stdout-path instead.
> >>
> >>I tried following patch with my SR400ac (I put Archer C5 aside for now).
> >
> >Hi Rafael
> >
> >Take a look at for example the bcm911360k.dts
> >
> > aliases {
> > serial0 = &uart3;
> > };
> >
> > chosen {
> > stdout-path = "serial0:115200n8";
> > };
> >
> >You need an alias to the serial device you want to us, and you should
> >list the speed, parity, bits etc.
>
> That was actually my first try (just with s/uart3/uart0) and I got the same problem.
Hi Rafael
Try decompiling the generate .dtb file back to a dts and see if it
looks correct.
Andrew
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
