On 03/10/2017 12:13 PM, Russell King - ARM Linux wrote:
Version 5 gives me no v4l2 controls exposed through the video device interface. Just like with version 4, version 5 is completely useless with IMX219: imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000200 ipu1_csi0: pipeline start failed with -110 imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000200 ipu1_csi0: pipeline start failed with -110 imx6-mipi-csi2: LP-11 timeout, phy_state = 0x00000200 ipu1_csi0: pipeline start failed with -110 So, like v4, I can't do any further testing.
Is the imx219 placing the csi-2 bus in LP-11 state on exit from s_power(ON)? I realize that probably means bringing the chip up to a completely operational state and then setting it to stream OFF in the s_power() op. The same had to be done for the OV5640. Steve -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
