On 09/03/17 19:01, Sakari Ailus wrote:
> Hi Hans,
>
> On Mon, Mar 06, 2017 at 03:56:02PM +0100, Hans Verkuil wrote:
>> From: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>>
>> Add binding documentation and add that file to the MAINTAINERS entry.
>>
>> Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx>
>> ---
>> .../devicetree/bindings/media/i2c/ov7670.txt | 44 ++++++++++++++++++++++
>> MAINTAINERS | 1 +
>> 2 files changed, 45 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/media/i2c/ov7670.txt
>>
>> diff --git a/Documentation/devicetree/bindings/media/i2c/ov7670.txt b/Documentation/devicetree/bindings/media/i2c/ov7670.txt
>> new file mode 100644
>> index 000000000000..6d9c90dff7a7
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/media/i2c/ov7670.txt
>> @@ -0,0 +1,44 @@
>> +* Omnivision OV7670 CMOS sensor
>> +
>> +The Omnivision OV7670 sensor supports multiple resolutions output, such as
>> +CIF, SVGA, UXGA. It also can support the YUV422/420, RGB565/555 or raw RGB
>> +output formats.
>> +
>> +Required Properties:
>> +- compatible: should be "ovti,ov7670"
>> +- clocks: reference to the xclk input clock.
>> +- clock-names: should be "xclk".
>> +
>> +Optional Properties:
>> +- reset-gpios: reference to the GPIO connected to the resetb pin, if any.
>> + Active is low.
>> +- powerdown-gpios: reference to the GPIO connected to the pwdn pin, if any.
>> + Active is high.
>> +
>> +The device node must contain one 'port' child node for its digital output
>> +video port, in accordance with the video interface bindings defined in
>> +Documentation/devicetree/bindings/media/video-interfaces.txt.
>> +
>> +Example:
>> +
>> + i2c1: i2c@f0018000 {
>> + ov7670: camera@21 {
>> + compatible = "ovti,ov7670";
>> + reg = <0x21>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&pinctrl_pck0_as_isi_mck &pinctrl_sensor_power &pinctrl_sensor_reset>;
>> + reset-gpios = <&pioE 11 GPIO_ACTIVE_LOW>;
>> + powerdown-gpios = <&pioE 13 GPIO_ACTIVE_HIGH>;
>> + clocks = <&pck0>;
>> + clock-names = "xclk";
>> + assigned-clocks = <&pck0>;
>> + assigned-clock-rates = <25000000>;
>> +
>> + port {
>> + ov7670_0: endpoint {
>> + remote-endpoint = <&isi_0>;
>> + bus-width = <8>;
>
> Didn't I previously request to specify which of the standardised properties
> are relevant for the device (and which ones are required and which are
> optional)? If I didn't, I'm doing that now. :-)
>
> E.g. the omap3isp driver documentation looks like this:
>
> Documentation/devicetree/bindings/media/ti,omap3isp.txt
I did document this in the atmel-isi bindings.
The real issue here is that bus-width is simply ignored by the ov7670 driver,
so it likely can be removed from the example in this document.
I clearly state the required and optional properties in this document, it is
just the example that is out-dated.
Regards,
Hans
>
>> + };
>> + };
>> + };
>> + };
>> diff --git a/MAINTAINERS b/MAINTAINERS
>> index 83a42ef1d1a7..93500928ca4f 100644
>> --- a/MAINTAINERS
>> +++ b/MAINTAINERS
>> @@ -9273,6 +9273,7 @@ L: linux-media@xxxxxxxxxxxxxxx
>> T: git git://linuxtv.org/media_tree.git
>> S: Maintained
>> F: drivers/media/i2c/ov7670.c
>> +F: Documentation/devicetree/bindings/media/i2c/ov7670.txt
>>
>> ONENAND FLASH DRIVER
>> M: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
