1;4601;0c
On Wed, Mar 08, 2017 at 11:35:39AM +0800, Chen-Yu Tsai wrote:
> Hi,
>
> On Tue, Mar 7, 2017 at 4:56 PM, Maxime Ripard
> <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote:
> > The A10s has an HDMI controller connected to the second TCON channel. Add
> > it to our DT.
> >
> > Signed-off-by: Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx>
> > ---
> > arch/arm/boot/dts/sun5i-a10s.dtsi | 34 ++++++++++++++++++++++++++++++++-
> > arch/arm/boot/dts/sun5i.dtsi | 1 +-
> > 2 files changed, 35 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi
> > index 074485782a4a..3482c9d2b120 100644
> > --- a/arch/arm/boot/dts/sun5i-a10s.dtsi
> > +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi
> > @@ -72,7 +72,33 @@
> > };
> > };
> >
> > + display-engine {
> > + compatible = "allwinner,sun5i-a10s-display-engine",
> > + "allwinner,sun5i-a13-display-engine";
> > + allwinner,pipelines = <&fe0>;
> > + };
> > +
> > soc@01c00000 {
> > + hdmi0: hdmi@01c16000 {
>
> Nit: is the 0 suffix needed? I don't see any indication that there is
> a second controller.
>
> > + compatible = "allwinner,sun5i-a10s-hdmi";
> > + reg = <0x01c16000 0x1000>;
> > + clocks = <&ccu CLK_AHB_HDMI>, <&ccu CLK_HDMI>,
> > + <&ccu CLK_PLL_VIDEO0_2X>,
> > + <&ccu CLK_PLL_VIDEO1_2X>;
> > + clock-names = "ahb", "mod", "pll-0", "pll-1";
> > + status = "disabled";
> > +
> > + port {
> > + #address-cells = <1>;
> > + #size-cells = <0>;
> > +
> > + hdmi0_in_tcon0: endpoint@0 {
> > + reg = <0>;
> > + remote-endpoint = <&tcon0_out_hdmi0>;
> > + };
> > + };
> > + };
> > +
> > pwm: pwm@01c20e00 {
> > compatible = "allwinner,sun5i-a10s-pwm";
> > reg = <0x01c20e00 0xc>;
> > @@ -129,3 +155,11 @@
> >
> > &sram_a {
> > };
> > +
> > +&tcon0_out {
> > + tcon0_out_hdmi0: endpoint@2 {
> > + reg = <2>;
> > + remote-endpoint = <&hdmi0_in_tcon0>;
> > + allwinner,tcon-channel = <1>;
> > + };
> > +};
> > diff --git a/arch/arm/boot/dts/sun5i.dtsi b/arch/arm/boot/dts/sun5i.dtsi
> > index f3b6e19244f9..3d009b2aa42a 100644
> > --- a/arch/arm/boot/dts/sun5i.dtsi
> > +++ b/arch/arm/boot/dts/sun5i.dtsi
> > @@ -273,6 +273,7 @@
> > tcon0_out_tve0: endpoint@1 {
> > reg = <1>;
> > remote-endpoint = <&tve0_in_tcon0>;
> > + allwinner,tcon-channel = <1>;
>
> This looks like a separate patch, probably following the binding
> change?
I don't know, the binding says that without anything specified, reg
would be used. I was assuming that we only needed it once we had the
new endpoint to make it consistent, therefore it didn't need an extra
patch.
But I can definitely create one if you want.
Maxime
--
Maxime Ripard, Free Electrons
Embedded Linux and Kernel engineering
http://free-electrons.com
Attachment:
signature.asc
Description: PGP signature
