Hello Akshay,
unfortunately there are not many CAN controllers for the SPI bus. I just
know the MPC251x, which behaves badly (message losses) under Linux,
especially at hight bit-rates due to insufficient RX buffering. What is
your experience with that driver for the HI-311x?
Thanks,
Wolfgang.
Am 07.03.2017 um 16:31 schrieb Akshay Bhat:
On 01/17/2017 02:22 PM, Akshay Bhat wrote:
This patch adds support for the Holt HI-311x CAN controller. The HI311x
CAN controller is capable of transmitting and receiving standard data
frames, extended data frames and remote frames. The HI311x interfaces
with the host over SPI.
Datasheet: www.holtic.com/documents/371-hi-3110_v-rev-jpdf.do
Signed-off-by: Akshay Bhat <nodeax@xxxxxxxxx>
---
Hi Marc,
Wanted to check if this patch can be included in the next kernel release
(4.12).
Thanks,
Akshay
--
To unsubscribe from this list: send the line "unsubscribe linux-can" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
