From: Konstantin Kozhevnikov <Konstantin.Kozhevnikov@xxxxxxxxxxxxxxxxxx>
The image renderer, or the distortion correction engine, is a drawing
processor with a simple instruction system capable of referencing video
capture data or data in an external memory as the 2D texture data and
performing texture mapping and drawing with respect to any shape that is
split into triangular objects.
This V4L2 memory-to-memory device driver only supports image renderer light
extended 4 (IMR-LX4) found in the R-Car gen3 SoCs; the R-Car gen2 support
can be added later...
[Sergei: merged 2 original patches, added the patch description, removed
unrelated parts, added the binding document, ported the driver to the
modern kernel, renamed the UAPI header file and the guard macros to match
the driver name, extended the copyrights, fixed up Kconfig prompt/depends/
help, made use of the BIT/GENMASK() macros, sorted #include's, removed
leading dots and fixed grammar in the comments, fixed up indentation to
use tabs where possible, renamed DLSR, CMRCR.DY1{0|2}, and ICR bits to
match the manual, changed the prefixes of the CMRCR[2]/TRI{M|C}R bits/
fields to match the manual, removed non-existent TRIMR.D{Y|U}D{X|V}M bits,
added/used the IMR/{UV|CP}DPOR/SUSR bits/fields/shifts, separated the
register offset/bit #define's, sorted the instruction macros by opcode,
removed unsupported LINE instruction, masked the register address in
WTL[2]/WTS instruction macros, avoided setting reserved bits when writing
to CMRCCR[2]/TRIMCR, used the SR bits instead of a bare number, removed
*inline* from .c file, fixed lines over 80 columns, removed useless parens,
operators, casts, braces, variables, #include's, statements, and even 1
function, inserted empty line after declaration, removed extra empty lines,
reordered some local variable desclarations, removed calls to 4l2_err() on
kmalloc() failure, replaced '*' with 'x' in some format strings for
v4l2_dbg(), fixed the error returned by imr_default(), avoided code
duplication in the IRQ handler, used '__packed' for the UAPI structures,
enclosed the macro parameters in parens, exchanged the values of
IMR_MAP_AUTO{S|D}G macros.]
Signed-off-by: Konstantin Kozhevnikov <Konstantin.Kozhevnikov@xxxxxxxxxxxxxxxxxx>
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@xxxxxxxxxxxxxxxxxx>
---
This patch is against the 'media_tree.git' repo's 'master' branch.
Changes in version 4:
- added/used SUSR fields/shifts.
Changes in version 3:
- added/used the {UV|CP}DPOR fields/shifts;
- removed unsupported LINE instruction;
- replaced '*' with 'x' in the string passed to v4l2_dbg() in
imr_dl_program_setup();
- switched to prepending the SoC model to "imr-lx4" in the "compatible" prop
strings.
Changes in version 2:
- renamed the ICR bits to match the manual;
- added/used the IMR bits;
- changed the prefixes of the CMRCR[2]/TRI{M|C}R bits/fields to match the
manual;
- renamed the CMRCR.DY1{0|2} bits to match the manual;
- removed non-existent TRIMR.D{Y|U}D{X|V}M bits;
- used the SR bits instead of a bare number;
- sorted the instruction macros by opcode, removing redundant parens;
- masked the register address in WTL[2]/WTS instruction macros;
- avoided setting reserved bits when writing to CMRCCR[2]/TRIMCR;
- mentioned the video capture data as a texture source in the binding and the
patch description;
- documented the SoC specific "compatible" values;
- clarified the "interrupts" and "clocks" property text;
- updated the patch description.
Documentation/devicetree/bindings/media/rcar_imr.txt | 27
drivers/media/platform/Kconfig | 13
drivers/media/platform/Makefile | 1
drivers/media/platform/rcar_imr.c | 1944 +++++++++++++++++++
include/uapi/linux/rcar_imr.h | 94
5 files changed, 2079 insertions(+)
Index: media_tree/Documentation/devicetree/bindings/media/rcar_imr.txt
===================================================================
--- /dev/null
+++ media_tree/Documentation/devicetree/bindings/media/rcar_imr.txt
@@ -0,0 +1,27 @@
+Renesas R-Car Image Renderer (Distortion Correction Engine)
+-----------------------------------------------------------
+
+The image renderer, or the distortion correction engine, is a drawing processor
+with a simple instruction system capable of referencing video capture data or
+data in an external memory as 2D texture data and performing texture mapping
+and drawing with respect to any shape that is split into triangular objects.
+
+Required properties:
+
+- compatible: "renesas,<soctype>-imr-lx4", "renesas,imr-lx4" as a fallback for
+ the image renderer light extended 4 (IMR-LX4) found in the R-Car gen3 SoCs,
+ where the examples with <soctype> are:
+ - "renesas,r8a7795-imr-lx4" for R-Car H3,
+ - "renesas,r8a7796-imr-lx4" for R-Car M3-W.
+- reg: offset and length of the register block;
+- interrupts: single interrupt specifier;
+- clocks: single clock phandle/specifier pair.
+
+Example:
+
+ imr-lx4@fe860000 {
+ compatible = "renesas,r8a7795-imr-lx4", "renesas,imr-lx4";
+ reg = <0 0xfe860000 0 0x2000>;
+ interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cpg CPG_MOD 823>;
+ };
Index: media_tree/drivers/media/platform/Kconfig
===================================================================
--- media_tree.orig/drivers/media/platform/Kconfig
+++ media_tree/drivers/media/platform/Kconfig
@@ -414,6 +414,19 @@ config VIDEO_RENESAS_FCP
To compile this driver as a module, choose M here: the module
will be called rcar-fcp.
+config VIDEO_RENESAS_IMR
+ tristate "Renesas Image Renderer (Distortion Correction Engine)"
+ depends on VIDEO_DEV && VIDEO_V4L2
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select VIDEOBUF2_DMA_CONTIG
+ select V4L2_MEM2MEM_DEV
+ ---help---
+ This is a V4L2 driver for the Renesas Image Renderer Light Extended 4
+ (IMR-LX4).
+
+ To compile this driver as a module, choose M here: the module
+ will be called rcar_imr.
+
config VIDEO_RENESAS_VSP1
tristate "Renesas VSP1 Video Processing Engine"
depends on VIDEO_V4L2 && VIDEO_V4L2_SUBDEV_API && HAS_DMA
Index: media_tree/drivers/media/platform/Makefile
===================================================================
--- media_tree.orig/drivers/media/platform/Makefile
+++ media_tree/drivers/media/platform/Makefile
@@ -52,6 +52,7 @@ obj-$(CONFIG_SOC_CAMERA) += soc_camera/
obj-$(CONFIG_VIDEO_RENESAS_FCP) += rcar-fcp.o
obj-$(CONFIG_VIDEO_RENESAS_FDP1) += rcar_fdp1.o
obj-$(CONFIG_VIDEO_RENESAS_JPU) += rcar_jpu.o
+obj-$(CONFIG_VIDEO_RENESAS_IMR) += rcar_imr.o
obj-$(CONFIG_VIDEO_RENESAS_VSP1) += vsp1/
obj-y += omap/
Index: media_tree/drivers/media/platform/rcar_imr.c
===================================================================
--- /dev/null
+++ media_tree/drivers/media/platform/rcar_imr.c
@@ -0,0 +1,1944 @@
+/*
+ * rcar_imr.c -- R-Car IMR-LX4 Driver
+ *
+ * Copyright (C) 2015-2017 Cogent Embedded, Inc. <source@xxxxxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#include <linux/bitops.h>
+#include <linux/clk.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/rcar_imr.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-mem2mem.h>
+#include <media/videobuf2-dma-contig.h>
+
+#define DRV_NAME "rcar_imr"
+
+/*******************************************************************************
+ * Module parameters
+ ******************************************************************************/
+
+static int debug;
+module_param(debug, int, 0644);
+MODULE_PARM_DESC(debug, "Debug level (0-4)");
+
+/*******************************************************************************
+ * Local type definitions
+ ******************************************************************************/
+
+/* configuration data */
+struct imr_cfg {
+ /* display-list main program data */
+ void *dl_vaddr;
+ dma_addr_t dl_dma_addr;
+ u32 dl_size;
+ u32 dl_start_offset;
+
+ /* pointers to the source/destination planes */
+ u32 *src_pa_ptr[2];
+ u32 *dst_pa_ptr[2];
+
+ /* subpixel destination coordinates space */
+ int dst_subpixel;
+
+ /* reference counter */
+ u32 refcount;
+
+ /* identifier (for debug output) */
+ u32 id;
+};
+
+struct imr_buffer {
+ /* standard M2M buffer descriptor */
+ struct v4l2_m2m_buffer buf;
+
+ /* pointer to mesh configuration for processing */
+ struct imr_cfg *cfg;
+};
+
+struct imr_q_data {
+ /* latched pixel format */
+ struct v4l2_pix_format fmt;
+
+ /* current format flags */
+ u32 flags;
+};
+
+struct imr_format_info {
+ char *name;
+ u32 fourcc;
+ u32 flags;
+};
+
+/* per-device data */
+struct imr_device {
+ struct device *dev;
+ struct clk *clock;
+ void __iomem *mmio;
+ int irq;
+ struct mutex mutex;
+ spinlock_t lock;
+
+ struct v4l2_device v4l2_dev;
+ struct video_device video_dev;
+ struct v4l2_m2m_dev *m2m_dev;
+ void *alloc_ctx;
+
+ /*
+ * do we need that counter really? framework counts fh structures
+ * for us - tbd
+ */
+ int refcount;
+
+ /* should we include media-dev? likely, no - tbd */
+};
+
+/* per file-handle context */
+struct imr_ctx {
+ struct v4l2_fh fh;
+ struct imr_device *imr;
+ struct v4l2_m2m_ctx *m2m_ctx;
+ struct imr_q_data queue[2];
+
+ /* current job configuration */
+ struct imr_cfg *cfg;
+
+ /* frame sequence counter */
+ u32 sequence;
+
+ /* cropping parameters (in pixels) */
+ u16 crop[4];
+
+ /* number of active configurations (debugging) */
+ u32 cfg_num;
+};
+
+/*******************************************************************************
+ * IMR registers
+ ******************************************************************************/
+
+#define IMR_CR 0x08
+#define IMR_SR 0x0C
+#define IMR_SRCR 0x10
+#define IMR_ICR 0x14
+#define IMR_IMR 0x18
+#define IMR_DLSP 0x1C
+#define IMR_DLPR 0x20
+#define IMR_DLSAR 0x30
+#define IMR_DSAR 0x34
+#define IMR_SSAR 0x38
+#define IMR_DSTR 0x3C
+#define IMR_SSTR 0x40
+#define IMR_DSOR 0x50
+#define IMR_CMRCR 0x54
+#define IMR_CMRCSR 0x58
+#define IMR_CMRCCR 0x5C
+#define IMR_TRIMR 0x60
+#define IMR_TRIMSR 0x64
+#define IMR_TRIMCR 0x68
+#define IMR_TRICR 0x6C
+#define IMR_UVDPOR 0x70
+#define IMR_SUSR 0x74
+#define IMR_SVSR 0x78
+#define IMR_XMINR 0x80
+#define IMR_YMINR 0x84
+#define IMR_XMAXR 0x88
+#define IMR_YMAXR 0x8C
+#define IMR_AMXSR 0x90
+#define IMR_AMYSR 0x94
+#define IMR_AMXOR 0x98
+#define IMR_AMYOR 0x9C
+#define IMR_CPDPOR 0xD0
+#define IMR_CMRCR2 0xE4
+#define IMR_CMRCSR2 0xE8
+#define IMR_CMRCCR2 0xEC
+
+#define IMR_CR_RS BIT(0)
+#define IMR_CR_SWRST BIT(15)
+
+#define IMR_SR_TRA BIT(0)
+#define IMR_SR_IER BIT(1)
+#define IMR_SR_INT BIT(2)
+#define IMR_SR_REN BIT(5)
+
+#define IMR_ICR_TRAENB BIT(0)
+#define IMR_ICR_IERENB BIT(1)
+#define IMR_ICR_INTENB BIT(2)
+
+#define IMR_IMR_TRAM BIT(0)
+#define IMR_IMR_IEM BIT(1)
+#define IMR_IMR_INM BIT(2)
+
+#define IMR_CMRCR_LUCE BIT(1)
+#define IMR_CMRCR_CLCE BIT(2)
+#define IMR_CMRCR_DUV_SHIFT 3
+#define IMR_CMRCR_DUV GENMASK(4, 3)
+#define IMR_CMRCR_SUV_SHIFT 5
+#define IMR_CMRCR_SUV GENMASK(6, 5)
+#define IMR_CMRCR_YISM BIT(7)
+#define IMR_CMRCR_Y10 BIT(8)
+#define IMR_CMRCR_Y12 BIT(9)
+#define IMR_CMRCR_SY10 BIT(11)
+#define IMR_CMRCR_SY12 BIT(12)
+#define IMR_CMRCR_YCM BIT(14)
+#define IMR_CMRCR_CP16E BIT(15)
+
+#define IMR_TRIMR_TME BIT(0)
+#define IMR_TRIMR_BFE BIT(1)
+#define IMR_TRIMR_AUTODG BIT(2)
+#define IMR_TRIMR_AUTOSG BIT(3)
+#define IMR_TRIMR_TCM BIT(6)
+
+#define IMR_TRICR_YCFORM BIT(31)
+
+#define IMR_UVDPOR_UVDPO_SHIFT 0
+#define IMR_UVDPOR_UVDPO GENMASK(2, 0)
+#define IMR_UVDPOR_DDP BIT(8)
+
+#define IMR_SUSR_SVW_SHIFT 0
+#define IMR_SUSR_SVW GENMASK(10, 0)
+#define IMR_SUSR_SUW_SHIFT 16
+#define IMR_SUSR_SUW GENMASK(26, 16)
+
+#define IMR_CPDPOR_VRDPO_SHIFT 0
+#define IMR_CPDPOR_VRDPO GENMASK(2, 0)
+#define IMR_CPDPOR_UBDPO_SHIFT 4
+#define IMR_CPDPOR_UBDPO GENMASK(6, 4)
+#define IMR_CPDPOR_YLDPO_SHIFT 8
+#define IMR_CPDPOR_YLDPO GENMASK(10, 8)
+
+#define IMR_CMRCR2_LUTE BIT(0)
+#define IMR_CMRCR2_YUV422E BIT(2)
+#define IMR_CMRCR2_YUV422FORM BIT(5)
+#define IMR_CMRCR2_UVFORM BIT(6)
+#define IMR_CMRCR2_TCTE BIT(12)
+#define IMR_CMRCR2_DCTE BIT(15)
+
+/*******************************************************************************
+ * Auxiliary helpers
+ ******************************************************************************/
+
+static struct imr_ctx *fh_to_ctx(struct v4l2_fh *fh)
+{
+ return container_of(fh, struct imr_ctx, fh);
+}
+
+static struct imr_buffer *to_imr_buffer(struct vb2_v4l2_buffer *vbuf)
+{
+ struct v4l2_m2m_buffer *b = container_of(vbuf, struct v4l2_m2m_buffer,
+ vb);
+
+ return container_of(b, struct imr_buffer, buf);
+}
+
+/*******************************************************************************
+ * Local constant definition
+ ******************************************************************************/
+
+#define IMR_F_Y8 BIT(0)
+#define IMR_F_Y10 BIT(1)
+#define IMR_F_Y12 BIT(2)
+#define IMR_F_UV8 BIT(3)
+#define IMR_F_UV10 BIT(4)
+#define IMR_F_UV12 BIT(5)
+#define IMR_F_PLANAR BIT(6)
+#define IMR_F_INTERLEAVED BIT(7)
+#define IMR_F_PLANES_MASK (BIT(8) - 1)
+#define IMR_F_UV_SWAP BIT(8)
+#define IMR_F_YUV_SWAP BIT(9)
+
+/* get common planes bits */
+static u32 __imr_flags_common(u32 iflags, u32 oflags)
+{
+ return iflags & oflags & IMR_F_PLANES_MASK;
+}
+
+static const struct imr_format_info imr_lx4_formats[] = {
+ {
+ .name = "YUV 4:2:2 semiplanar (NV16)",
+ .fourcc = V4L2_PIX_FMT_NV16,
+ .flags = IMR_F_Y8 | IMR_F_UV8 | IMR_F_PLANAR,
+ },
+ {
+ .name = "YVU 4:2:2 semiplanar (NV61)",
+ .fourcc = V4L2_PIX_FMT_NV61,
+ .flags = IMR_F_Y8 | IMR_F_UV8 | IMR_F_PLANAR | IMR_F_UV_SWAP,
+ },
+ {
+ .name = "YUV 4:2:2 interleaved (YUYV)",
+ .fourcc = V4L2_PIX_FMT_YUYV,
+ .flags = IMR_F_Y8 | IMR_F_UV8,
+ },
+ {
+ .name = "YUV 4:2:2 interleaved (UYVY)",
+ .fourcc = V4L2_PIX_FMT_UYVY,
+ .flags = IMR_F_Y8 | IMR_F_UV8 | IMR_F_YUV_SWAP,
+ },
+ {
+ .name = "YUV 4:2:2 interleaved (YVYU)",
+ .fourcc = V4L2_PIX_FMT_YVYU,
+ .flags = IMR_F_Y8 | IMR_F_UV8 | IMR_F_UV_SWAP,
+ },
+ {
+ .name = "YUV 4:2:2 interleaved (UYVY)",
+ .fourcc = V4L2_PIX_FMT_VYUY,
+ .flags = IMR_F_Y8 | IMR_F_UV8 | IMR_F_UV_SWAP | IMR_F_YUV_SWAP,
+ },
+ {
+ .name = "Greyscale 8-bit",
+ .fourcc = V4L2_PIX_FMT_GREY,
+ .flags = IMR_F_Y8 | IMR_F_PLANAR,
+ },
+ {
+ .name = "Greyscale 10-bit",
+ .fourcc = V4L2_PIX_FMT_Y10,
+ .flags = IMR_F_Y8 | IMR_F_Y10 | IMR_F_PLANAR,
+ },
+ {
+ .name = "Greyscale 12-bit",
+ .fourcc = V4L2_PIX_FMT_Y12,
+ .flags = IMR_F_Y8 | IMR_F_Y10 | IMR_F_Y12 | IMR_F_PLANAR,
+ },
+ {
+ .name = "Chrominance UV 8-bit",
+ .fourcc = V4L2_PIX_FMT_UV8,
+ .flags = IMR_F_UV8 | IMR_F_PLANAR,
+ },
+};
+
+/* mesh configuration constructor */
+static struct imr_cfg *imr_cfg_create(struct imr_ctx *ctx,
+ u32 dl_size, u32 dl_start)
+{
+ struct imr_device *imr = ctx->imr;
+ struct imr_cfg *cfg;
+
+ /* allocate configuration descriptor */
+ cfg = kmalloc(sizeof(*cfg), GFP_KERNEL);
+ if (!cfg)
+ return ERR_PTR(-ENOMEM);
+
+ /* allocate contiguous memory for a display list */
+ cfg->dl_vaddr = dma_alloc_writecombine(imr->dev, dl_size,
+ &cfg->dl_dma_addr, GFP_KERNEL);
+ if (!cfg->dl_vaddr) {
+ v4l2_err(&imr->v4l2_dev,
+ "failed to allocate %u bytes for a DL\n", dl_size);
+ kfree(cfg);
+ return ERR_PTR(-ENOMEM);
+ }
+
+ cfg->dl_size = dl_size;
+ cfg->dl_start_offset = dl_start;
+ cfg->refcount = 1;
+ cfg->id = ctx->sequence;
+
+ /* for debugging purposes, advance number of active configurations */
+ ctx->cfg_num++;
+
+ return cfg;
+}
+
+/* add reference to the current configuration */
+static inline struct imr_cfg *imr_cfg_ref(struct imr_ctx *ctx)
+{
+ struct imr_cfg *cfg = ctx->cfg;
+
+ BUG_ON(!cfg);
+ cfg->refcount++;
+ return cfg;
+}
+
+/* mesh configuration destructor */
+static void imr_cfg_unref(struct imr_ctx *ctx, struct imr_cfg *cfg)
+{
+ struct imr_device *imr = ctx->imr;
+
+ /* no atomicity is required as operation is locked with device mutex */
+ if (!cfg || --cfg->refcount)
+ return;
+
+ /* release memory allocated for a display list */
+ if (cfg->dl_vaddr)
+ dma_free_writecombine(imr->dev, cfg->dl_size, cfg->dl_vaddr,
+ cfg->dl_dma_addr);
+
+ /* destroy the configuration structure */
+ kfree(cfg);
+
+ /* decrement number of active configurations (debugging) */
+ WARN_ON(!ctx->cfg_num--);
+}
+
+/*******************************************************************************
+ * Context processing queue
+ ******************************************************************************/
+
+static int imr_queue_setup(struct vb2_queue *vq,
+ unsigned int *nbuffers, unsigned int *nplanes,
+ unsigned int sizes[], struct device *alloc_ctxs[])
+{
+ struct imr_ctx *ctx = vb2_get_drv_priv(vq);
+ struct imr_q_data *q_data = &ctx->queue
+ [V4L2_TYPE_IS_OUTPUT(vq->type) ? 0 : 1];
+ int w = q_data->fmt.width;
+ int h = q_data->fmt.height;
+
+ /* we use only single-plane formats */
+ *nplanes = 1;
+
+ /* specify plane size */
+ switch (q_data->fmt.pixelformat) {
+ case V4L2_PIX_FMT_UYVY:
+ case V4L2_PIX_FMT_YUYV:
+ case V4L2_PIX_FMT_VYUY:
+ case V4L2_PIX_FMT_YVYU:
+ case V4L2_PIX_FMT_NV16:
+ case V4L2_PIX_FMT_Y10:
+ case V4L2_PIX_FMT_Y16:
+ sizes[0] = w * h * 2;
+ break;
+
+ case V4L2_PIX_FMT_UV8:
+ case V4L2_PIX_FMT_GREY:
+ sizes[0] = w * h;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ /* specify default allocator */
+ alloc_ctxs[0] = ctx->imr->alloc_ctx;
+
+ return 0;
+}
+
+static int imr_buf_prepare(struct vb2_buffer *vb)
+{
+ /*
+ * unclear yet if we want to prepare a buffer somehow
+ * (cache invalidation? - tbd)
+ */
+ return 0;
+}
+
+static void imr_buf_queue(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct vb2_queue *q = vb->vb2_queue;
+ struct imr_ctx *ctx = vb2_get_drv_priv(q);
+
+ WARN_ON_ONCE(!mutex_is_locked(&ctx->imr->mutex));
+
+ v4l2_dbg(3, debug, &ctx->imr->v4l2_dev,
+ "%sput buffer <0x%08llx> submitted\n",
+ q->is_output ? "in" : "out",
+ (u64)vb2_dma_contig_plane_dma_addr(vb, 0));
+
+ /*
+ * for input buffer, put current configuration pointer
+ * (add reference)
+ */
+ if (q->is_output)
+ to_imr_buffer(vbuf)->cfg = imr_cfg_ref(ctx);
+
+ v4l2_m2m_buf_queue(ctx->m2m_ctx, vbuf);
+}
+
+static void imr_buf_finish(struct vb2_buffer *vb)
+{
+ struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+ struct vb2_queue *q = vb->vb2_queue;
+ struct imr_ctx *ctx = vb2_get_drv_priv(q);
+
+ WARN_ON(!mutex_is_locked(&ctx->imr->mutex));
+
+ /* any special processing of completed buffer? - tbd */
+ v4l2_dbg(3, debug, &ctx->imr->v4l2_dev,
+ "%sput buffer <0x%08llx> done\n", q->is_output ? "in" : "out",
+ (u64)vb2_dma_contig_plane_dma_addr(vb, 0));
+
+ /* unref configuration pointer as needed */
+ if (q->is_output)
+ imr_cfg_unref(ctx, to_imr_buffer(vbuf)->cfg);
+}
+
+static int imr_start_streaming(struct vb2_queue *vq, unsigned int count)
+{
+ struct imr_ctx *ctx = vb2_get_drv_priv(vq);
+
+ v4l2_dbg(1, debug, &ctx->imr->v4l2_dev, "%s streaming started\n",
+ V4L2_TYPE_IS_OUTPUT(vq->type) ? "output" : "capture");
+ return 0;
+}
+
+static void imr_stop_streaming(struct vb2_queue *vq)
+{
+ struct imr_ctx *ctx = vb2_get_drv_priv(vq);
+ unsigned long flags;
+ struct vb2_v4l2_buffer *vb;
+
+ spin_lock_irqsave(&ctx->imr->lock, flags);
+
+ /* purge all buffers from a queue */
+ if (V4L2_TYPE_IS_OUTPUT(vq->type)) {
+ while ((vb = v4l2_m2m_src_buf_remove(ctx->m2m_ctx)) != NULL)
+ v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
+ } else {
+ while ((vb = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx)) != NULL)
+ v4l2_m2m_buf_done(vb, VB2_BUF_STATE_ERROR);
+ }
+
+ spin_unlock_irqrestore(&ctx->imr->lock, flags);
+
+ v4l2_dbg(1, debug, &ctx->imr->v4l2_dev, "%s streaming stopped\n",
+ V4L2_TYPE_IS_OUTPUT(vq->type) ? "output" : "capture");
+}
+
+/* buffer queue operations */
+static struct vb2_ops imr_qops = {
+ .queue_setup = imr_queue_setup,
+ .buf_prepare = imr_buf_prepare,
+ .buf_queue = imr_buf_queue,
+ .buf_finish = imr_buf_finish,
+ .start_streaming = imr_start_streaming,
+ .stop_streaming = imr_stop_streaming,
+ .wait_prepare = vb2_ops_wait_prepare,
+ .wait_finish = vb2_ops_wait_finish,
+};
+
+/* M2M device processing queue initialization */
+static int imr_queue_init(void *priv, struct vb2_queue *src_vq,
+ struct vb2_queue *dst_vq)
+{
+ struct imr_ctx *ctx = priv;
+ int ret;
+
+ memset(src_vq, 0, sizeof(*src_vq));
+ src_vq->type = V4L2_BUF_TYPE_VIDEO_OUTPUT;
+ src_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+ src_vq->drv_priv = ctx;
+ src_vq->buf_struct_size = sizeof(struct imr_buffer);
+ src_vq->ops = &imr_qops;
+ src_vq->mem_ops = &vb2_dma_contig_memops;
+ src_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ src_vq->lock = &ctx->imr->mutex;
+ ret = vb2_queue_init(src_vq);
+ if (ret)
+ return ret;
+
+ memset(dst_vq, 0, sizeof(*dst_vq));
+ dst_vq->type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
+ dst_vq->io_modes = VB2_MMAP | VB2_USERPTR | VB2_DMABUF;
+ dst_vq->drv_priv = ctx;
+ dst_vq->buf_struct_size = sizeof(struct v4l2_m2m_buffer);
+ dst_vq->ops = &imr_qops;
+ dst_vq->mem_ops = &vb2_dma_contig_memops;
+ dst_vq->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+ dst_vq->lock = &ctx->imr->mutex;
+ return vb2_queue_init(dst_vq);
+}
+
+/*******************************************************************************
+ * Display list commands
+ ******************************************************************************/
+
+/* display list opcodes */
+#define IMR_OP_NOP(n) ((0x80 << 24) | ((n) & 0xFFFF))
+#define IMR_OP_WTL(add, n) ((0x81 << 24) | ((((add) & 0x3FC) / 4) << 16) \
+ | ((n) & 0xFFFF))
+#define IMR_OP_WTS(add, data) ((0x82 << 24) | ((((add) & 0x3FC) / 4) << 16) \
+ | ((data) & 0xFFFF))
+#define IMR_OP_WTL2(add, n) ((0x83 << 24) | ((((add) & 0xFFFC) / 4) << 10) \
+ | ((n) & 0x3FF))
+#define IMR_OP_SYNCM (0x86 << 24)
+#define IMR_OP_INT (0x88 << 24)
+#define IMR_OP_TRI(n) ((0x8A << 24) | ((n) & 0xFFFF))
+#define IMR_OP_GOSUB (0x8C << 24)
+#define IMR_OP_RET (0x8D << 24)
+#define IMR_OP_TRAP (0x8F << 24)
+
+/*******************************************************************************
+ * Operation type decoding helpers
+ ******************************************************************************/
+
+static u16 __imr_auto_sg_dg_tcm(u32 type)
+{
+ return (type & IMR_MAP_AUTOSG ? IMR_TRIMR_AUTOSG :
+ (type & IMR_MAP_AUTODG ? IMR_TRIMR_AUTODG : 0)) |
+ (type & IMR_MAP_TCM ? IMR_TRIMR_TCM : 0);
+}
+
+static u16 __imr_uvdp(u32 type)
+{
+ return (__IMR_MAP_UVDPOR(type) << IMR_UVDPOR_UVDPO_SHIFT) |
+ (type & IMR_MAP_DDP ? IMR_UVDPOR_DDP : 0);
+}
+
+static inline u16 __imr_cpdp(u32 type)
+{
+ return (__IMR_MAP_YLDPO(type) << IMR_CPDPOR_YLDPO_SHIFT) |
+ (__IMR_MAP_UBDPO(type) << IMR_CPDPOR_UBDPO_SHIFT) |
+ (__IMR_MAP_VRDPO(type) << IMR_CPDPOR_VRDPO_SHIFT);
+}
+
+static u16 __imr_luce(u32 type)
+{
+ return type & IMR_MAP_LUCE ? IMR_CMRCR_LUCE : 0;
+}
+
+static u16 __imr_clce(u32 type)
+{
+ return type & IMR_MAP_CLCE ? IMR_CMRCR_CLCE : 0;
+}
+
+/*******************************************************************************
+ * Type A (absolute coordinates of source/destination) mapping
+ ******************************************************************************/
+
+/* return size of the subroutine for type "a" mapping */
+static u32 imr_tri_type_a_get_length(struct imr_mesh *mesh, int item_size)
+{
+ return ((mesh->columns * (item_size / 2) + 1) * (mesh->rows - 1) + 1) *
+ sizeof(u32);
+}
+
+/* set a mesh rows * columns using absolute coordinates */
+static u32 *imr_tri_set_type_a(u32 *dl, void *map, struct imr_mesh *mesh,
+ int item_size)
+{
+ int rows = mesh->rows;
+ int columns = mesh->columns;
+ u32 stride = item_size * columns;
+ int i, j;
+
+ /* convert lattice into set of stripes */
+ for (i = 0; i < rows - 1; i++) {
+ *dl++ = IMR_OP_TRI(columns * 2);
+ for (j = 0; j < columns; j++) {
+ memcpy((void *)dl, map, item_size);
+ memcpy((void *)dl + item_size, map + stride, item_size);
+ dl += item_size / 2;
+ map += item_size;
+ }
+ }
+
+ *dl++ = IMR_OP_RET;
+ return dl;
+}
+
+/*******************************************************************************
+ * Type B mapping (automatically generated source or destination coordinates)
+ ******************************************************************************/
+
+/* calculate length of a type "b" mapping */
+static u32 imr_tri_type_b_get_length(struct imr_mesh *mesh, int item_size)
+{
+ return ((mesh->columns * (item_size / 2) + 2) * (mesh->rows - 1) + 4) *
+ sizeof(u32);
+}
+
+/* set an auto-generated mesh n * m for a source/destination */
+static u32 *imr_tri_set_type_b(u32 *dl, void *map, struct imr_mesh *mesh,
+ int item_size)
+{
+ int rows = mesh->rows;
+ int columns = mesh->columns;
+ int stride = item_size * columns;
+ int x0 = mesh->x0;
+ int y0 = mesh->y0;
+ int dx = mesh->dx;
+ int dy = mesh->dy;
+ int i, j;
+
+ /* set mesh configuration */
+ *dl++ = IMR_OP_WTS(IMR_AMXSR, dx);
+ *dl++ = IMR_OP_WTS(IMR_AMYSR, dy);
+
+ /* origin by "x" coordinate is the same across all rows */
+ *dl++ = IMR_OP_WTS(IMR_AMXOR, x0);
+
+ /* convert lattice into set of stripes */
+ for (i = 0; i < rows - 1; i++, y0 += dy) {
+ /* set origin by "y" coordinate for a current row */
+ *dl++ = IMR_OP_WTS(IMR_AMYOR, y0);
+ *dl++ = IMR_OP_TRI(2 * columns);
+
+ /* fill single row */
+ for (j = 0; j < columns; j++) {
+ memcpy((void *)dl, map, item_size);
+ memcpy((void *)dl + item_size, map + stride, item_size);
+ dl += item_size / 2;
+ map += item_size;
+ }
+ }
+
+ *dl++ = IMR_OP_RET;
+ return dl;
+}
+
+/*******************************************************************************
+ * Type C mapping (vertex-buffer-object)
+ ******************************************************************************/
+
+/* calculate length of a type "c" mapping */
+static u32 imr_tri_type_c_get_length(struct imr_vbo *vbo, int item_size)
+{
+ return ((4 + 3 * item_size) * vbo->num + 4);
+}
+
+/* set a VBO mapping using absolute coordinates */
+static u32 *imr_tri_set_type_c(u32 *dl, void *map, struct imr_vbo *vbo,
+ int item_size)
+{
+ int num = vbo->num;
+ int i;
+
+ /* prepare list of triangles to draw */
+ for (i = 0; i < num; i++) {
+ *dl++ = IMR_OP_TRI(3);
+ memcpy((void *)dl, map, 3 * item_size);
+ dl += 3 * item_size / 4;
+ map += 3 * item_size;
+ }
+
+ *dl++ = IMR_OP_RET;
+ return dl;
+}
+
+/*******************************************************************************
+ * DL program creation
+ ******************************************************************************/
+
+/* return length of a DL main program */
+static u32 imr_dl_program_length(struct imr_ctx *ctx)
+{
+ u32 iflags = ctx->queue[0].flags;
+ u32 oflags = ctx->queue[1].flags;
+ u32 cflags = __imr_flags_common(iflags, oflags);
+
+ /* check if formats are compatible */
+ if (((iflags & IMR_F_PLANAR) && !(oflags & IMR_F_PLANAR)) || !cflags) {
+ v4l2_err(&ctx->imr->v4l2_dev,
+ "formats are incompatible: if=%x, of=%x, cf=%x\n",
+ iflags, oflags, cflags);
+ return 0;
+ }
+
+ /*
+ * maximal possible length of the program is 27 32-bits words;
+ * round up to 32
+ */
+ return 32 << 2;
+}
+
+/* setup DL for Y/YUV planar/interleaved processing */
+static void imr_dl_program_setup(struct imr_ctx *ctx, struct imr_cfg *cfg,
+ u32 type, u32 *dl, u32 subaddr)
+{
+ u32 iflags = ctx->queue[0].flags;
+ u32 oflags = ctx->queue[1].flags;
+ u32 cflags = __imr_flags_common(iflags, oflags);
+ u16 src_y_fmt = (iflags & IMR_F_Y12 ? IMR_CMRCR_SY12 :
+ (iflags & IMR_F_Y10 ? IMR_CMRCR_SY10 : 0));
+ u16 src_uv_fmt = (iflags & IMR_F_UV12 ? 2 :
+ (iflags & IMR_F_UV10 ? 1 : 0)) << IMR_CMRCR_SUV_SHIFT;
+ u16 dst_y_fmt = (cflags & IMR_F_Y12 ? IMR_CMRCR_Y12 :
+ (cflags & IMR_F_Y10 ? IMR_CMRCR_Y10 : 0));
+ u16 dst_uv_fmt = (cflags & IMR_F_UV12 ? 2 :
+ (cflags & IMR_F_UV10 ? 1 : 0)) << IMR_CMRCR_DUV_SHIFT;
+ int w = ctx->queue[0].fmt.width;
+ int h = ctx->queue[0].fmt.height;
+ int W = ctx->queue[1].fmt.width;
+ int H = ctx->queue[1].fmt.height;
+
+ v4l2_dbg(2, debug, &ctx->imr->v4l2_dev,
+ "setup %ux%u -> %ux%u mapping (type=%x)\n", w, h, W, H, type);
+
+ /* set triangle mode register from user-supplied descriptor */
+ *dl++ = IMR_OP_WTS(IMR_TRIMCR, 0x004F);
+
+ /* set automatic source / destination coordinates generation flags */
+ *dl++ = IMR_OP_WTS(IMR_TRIMSR, __imr_auto_sg_dg_tcm(type) |
+ IMR_TRIMR_BFE | IMR_TRIMR_TME);
+
+ /* set source / destination coordinate precision */
+ *dl++ = IMR_OP_WTS(IMR_UVDPOR, __imr_uvdp(type));
+
+ /* set luminance/chromacity correction parameters precision */
+ *dl++ = IMR_OP_WTS(IMR_CPDPOR, __imr_cpdp(type));
+
+ /* reset rendering mode registers */
+ *dl++ = IMR_OP_WTS(IMR_CMRCCR, 0xDBFE);
+ *dl++ = IMR_OP_WTS(IMR_CMRCCR2, 0x9065);
+
+ /* set source/destination addresses of Y/UV plane */
+ *dl++ = IMR_OP_WTL(IMR_DSAR, 2);
+ cfg->dst_pa_ptr[0] = dl++;
+ cfg->src_pa_ptr[0] = dl++;
+
+ /* select planar/interleaved mode basing on input format */
+ if (iflags & IMR_F_PLANAR) {
+ /* planar input means planar output; set Y-plane precision */
+ if (cflags & IMR_F_Y8) {
+ /*
+ * setup Y-plane processing: YCM=0, SY/DY=xx,
+ * SUV/DUV=0
+ */
+ *dl++ = IMR_OP_WTS(IMR_CMRCSR, src_y_fmt | src_uv_fmt |
+ dst_y_fmt | dst_uv_fmt |
+ __imr_luce(type));
+
+ /*
+ * set source/destination strides basing on Y-plane
+ * precision
+ */
+ *dl++ = IMR_OP_WTS(IMR_DSTR,
+ W << (cflags & IMR_F_Y10 ? 1 : 0));
+ *dl++ = IMR_OP_WTS(IMR_SSTR,
+ w << (iflags & IMR_F_Y10 ? 1 : 0));
+ } else {
+ /* setup UV-plane processing only */
+ *dl++ = IMR_OP_WTS(IMR_CMRCSR, IMR_CMRCR_YCM |
+ src_uv_fmt | dst_uv_fmt |
+ __imr_clce(type));
+
+ /*
+ * set source/destination strides basing on UV-plane
+ * precision
+ */
+ *dl++ = IMR_OP_WTS(IMR_DSTR,
+ W << (cflags & IMR_F_UV10 ? 1 : 0));
+ *dl++ = IMR_OP_WTS(IMR_SSTR,
+ w << (iflags & IMR_F_UV10 ? 1 : 0));
+ }
+ } else {
+ u16 src_fmt = (iflags & IMR_F_UV_SWAP ? IMR_CMRCR2_UVFORM : 0) |
+ (iflags & IMR_F_YUV_SWAP ?
+ IMR_CMRCR2_YUV422FORM : 0);
+ u32 dst_fmt = (oflags & IMR_F_YUV_SWAP ? IMR_TRICR_YCFORM : 0);
+
+ /* interleaved input; output is either interleaved or planar */
+ *dl++ = IMR_OP_WTS(IMR_CMRCSR2, IMR_CMRCR2_YUV422E | src_fmt);
+
+ /* destination is always YUYV or UYVY */
+ *dl++ = IMR_OP_WTL(IMR_TRICR, 1);
+ *dl++ = dst_fmt;
+
+ /* set precision of Y/UV planes and required correction */
+ *dl++ = IMR_OP_WTS(IMR_CMRCSR, src_y_fmt | src_uv_fmt |
+ dst_y_fmt | dst_uv_fmt | __imr_clce(type) |
+ __imr_luce(type));
+
+ /* set source stride basing on precision (2 or 4 bytes/pixel) */
+ *dl++ = IMR_OP_WTS(IMR_SSTR, w << (iflags & IMR_F_Y10 ? 2 : 1));
+
+ /* if output is planar, put the offset value */
+ if (oflags & IMR_F_PLANAR) {
+ /* specify offset of a destination UV plane */
+ *dl++ = IMR_OP_WTL(IMR_DSOR, 1);
+ *dl++ = W * H;
+
+ /*
+ * destination stride is 1 or 2 bytes/pixel
+ * (same for both Y and UV planes)
+ */
+ *dl++ = IMR_OP_WTS(IMR_DSTR,
+ W << (cflags & IMR_F_Y10 ? 1 : 0));
+ } else {
+ /*
+ * destination stride if 2 or 4 bytes/pixel
+ * (Y and UV planes interleaved)
+ */
+ *dl++ = IMR_OP_WTS(IMR_DSTR,
+ W << (cflags & IMR_F_Y10 ? 2 : 1));
+ }
+ }
+
+ /*
+ * set source width/height of Y/UV plane
+ * (for Y plane upper part of SUSR is ignored)
+ */
+ *dl++ = IMR_OP_WTL(IMR_SUSR, 2);
+ *dl++ = ((w - 2) << IMR_SUSR_SUW_SHIFT) |
+ ((w - 1) << IMR_SUSR_SVW_SHIFT);
+ *dl++ = h - 1;
+
+ /* invoke subroutine for triangles drawing */
+ *dl++ = IMR_OP_GOSUB;
+ *dl++ = subaddr;
+
+ /* if we have a planar output with both Y and UV planes available */
+ if ((cflags & (IMR_F_PLANAR | IMR_F_Y8 | IMR_F_UV8)) ==
+ (IMR_F_PLANAR | IMR_F_Y8 | IMR_F_UV8)) {
+ /* select UV-plane processing mode; put sync before switching */
+ *dl++ = IMR_OP_SYNCM;
+
+ /* setup UV-plane source/destination addresses */
+ *dl++ = IMR_OP_WTL(IMR_DSAR, 2);
+ cfg->dst_pa_ptr[1] = dl++;
+ cfg->src_pa_ptr[1] = dl++;
+
+ /* select correction mode */
+ *dl++ = IMR_OP_WTS(IMR_CMRCSR, IMR_CMRCR_YCM |
+ __imr_clce(type));
+
+ /* luminance correction bit must be cleared (if it was set) */
+ *dl++ = IMR_OP_WTS(IMR_CMRCCR, IMR_CMRCR_LUCE);
+
+ /* draw triangles */
+ *dl++ = IMR_OP_GOSUB;
+ *dl++ = subaddr;
+ } else {
+ /*
+ * clear pointers to the source/destination UV-planes addresses
+ */
+ cfg->src_pa_ptr[1] = cfg->dst_pa_ptr[1] = NULL;
+ }
+
+ /* signal completion of the operation */
+ *dl++ = IMR_OP_SYNCM;
+ *dl++ = IMR_OP_TRAP;
+}
+
+/*******************************************************************************
+ * Mapping specification processing
+ ******************************************************************************/
+
+/* set mapping data (function called with video device lock held) */
+static int imr_ioctl_map(struct imr_ctx *ctx, struct imr_map_desc *desc)
+{
+ struct imr_device *imr = ctx->imr;
+ struct imr_mesh *mesh;
+ struct imr_vbo *vbo;
+ struct imr_cfg *cfg;
+ void *buf, *map;
+ u32 type;
+ u32 length, item_size;
+ u32 tri_length;
+ void *dl_vaddr;
+ u32 dl_size;
+ u32 dl_start_offset;
+ dma_addr_t dl_dma_addr;
+ int ret = 0;
+
+ /* read remainder of data into temporary buffer */
+ length = desc->size;
+ buf = kmalloc(length, GFP_KERNEL);
+ if (!buf)
+ return -ENOMEM;
+
+ /* copy mesh data */
+ if (copy_from_user(buf, (void __user *)desc->data, length)) {
+ v4l2_err(&imr->v4l2_dev,
+ "failed to read %u bytes of mapping specification\n",
+ length);
+ ret = -EFAULT;
+ goto out;
+ }
+
+ type = desc->type;
+
+ /* mesh item size calculation */
+ item_size = (type & IMR_MAP_LUCE ? 4 : 0) +
+ (type & IMR_MAP_CLCE ? 4 : 0);
+
+ /* calculate the length of a display list */
+ if (type & IMR_MAP_MESH) {
+ /* assure we have proper mesh descriptor */
+ if (length < sizeof(struct imr_mesh)) {
+ v4l2_err(&imr->v4l2_dev,
+ "invalid mesh specification size: %u\n",
+ length);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ mesh = (struct imr_mesh *)buf;
+ length -= sizeof(struct imr_mesh);
+ map = buf + sizeof(struct imr_mesh);
+
+ if (type & (IMR_MAP_AUTODG | IMR_MAP_AUTOSG)) {
+ /* source / destination vertex size is 4 bytes */
+ item_size += 4;
+
+ /*
+ * mapping is given using automatic generation pattern;
+ * check size
+ */
+ if (mesh->rows * mesh->columns * item_size != length) {
+ v4l2_err(&imr->v4l2_dev,
+ "invalid mesh size: %u*%u*%u != %u\n",
+ mesh->rows, mesh->columns, item_size,
+ length);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* calculate size of triangles drawing subroutine */
+ tri_length = imr_tri_type_b_get_length(mesh, item_size);
+ } else {
+ /* source / destination vertes size if 8 bytes */
+ item_size += 8;
+
+ /* mapping is done with absolute coordinates */
+ if (mesh->rows * mesh->columns * item_size != length) {
+ v4l2_err(&imr->v4l2_dev,
+ "invalid mesh size: %u*%u*%u != %u\n",
+ mesh->rows, mesh->columns, item_size,
+ length);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* calculate size of triangles drawing subroutine */
+ tri_length = imr_tri_type_a_get_length(mesh, item_size);
+ }
+ } else {
+ /* assure we have proper VBO descriptor */
+ if (length < sizeof(struct imr_vbo)) {
+ v4l2_err(&imr->v4l2_dev,
+ "invalid vbo specification size: %u\n",
+ length);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* make sure there is no automatic-generation flags */
+ if (type & (IMR_MAP_AUTODG | IMR_MAP_AUTOSG)) {
+ v4l2_err(&imr->v4l2_dev,
+ "invalid auto-dg/sg flags: 0x%x\n", type);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ vbo = (struct imr_vbo *)buf;
+ length -= sizeof(struct imr_vbo);
+ map = buf + sizeof(struct imr_vbo);
+
+ /* vertex is given with absolute coordinates */
+ item_size += 8;
+
+ /* check the length is sane */
+ if (length != vbo->num * 3 * item_size) {
+ v4l2_err(&imr->v4l2_dev,
+ "invalid vbo size: %u*%u*3 != %u\n", vbo->num,
+ item_size, length);
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* calculate size of trangles drawing subroutine */
+ tri_length = imr_tri_type_c_get_length(vbo, item_size);
+ }
+
+ /* DL main program shall start with 8-byte aligned address */
+ dl_start_offset = (tri_length + 7) & ~7;
+
+ /* calculate main routine length */
+ dl_size = imr_dl_program_length(ctx);
+ if (!dl_size) {
+ v4l2_err(&imr->v4l2_dev, "format configuration error\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ /* we use a single display list, with TRI subroutine prepending MAIN */
+ dl_size += dl_start_offset;
+
+ /* unref current configuration (will not be used by subsequent jobs) */
+ imr_cfg_unref(ctx, ctx->cfg);
+
+ /* create new configuration */
+ ctx->cfg = cfg = imr_cfg_create(ctx, dl_size, dl_start_offset);
+ if (IS_ERR(cfg)) {
+ ret = PTR_ERR(cfg);
+ v4l2_err(&imr->v4l2_dev,
+ "failed to create configuration: %d\n", ret);
+ goto out;
+ }
+
+ /* get pointer to the new display list */
+ dl_vaddr = cfg->dl_vaddr;
+ dl_dma_addr = cfg->dl_dma_addr;
+
+ /* prepare a triangles drawing subroutine */
+ if (type & IMR_MAP_MESH) {
+ if (type & (IMR_MAP_AUTOSG | IMR_MAP_AUTODG))
+ imr_tri_set_type_b(dl_vaddr, map, mesh, item_size);
+ else
+ imr_tri_set_type_a(dl_vaddr, map, mesh, item_size);
+ } else {
+ imr_tri_set_type_c(dl_vaddr, map, vbo, item_size);
+ }
+
+ /* prepare main DL-program */
+ imr_dl_program_setup(ctx, cfg, type, dl_vaddr + dl_start_offset,
+ (u32)dl_dma_addr);
+
+ /* update cropping parameters */
+ cfg->dst_subpixel = (type & IMR_MAP_DDP ? 2 : 0);
+
+ /* display list updated successfully */
+ v4l2_dbg(2, debug, &ctx->imr->v4l2_dev,
+ "display-list created: #%u[%08X]:%u[%u]\n",
+ cfg->id, (u32)dl_dma_addr, dl_size, dl_start_offset);
+
+ if (debug >= 4)
+ print_hex_dump_bytes("DL-", DUMP_PREFIX_OFFSET,
+ dl_vaddr + dl_start_offset,
+ dl_size - dl_start_offset);
+
+out:
+ /* release interim buffer */
+ kfree(buf);
+
+ return ret;
+}
+
+/*******************************************************************************
+ * V4L2 I/O controls
+ ******************************************************************************/
+
+/* test for a format supported */
+static int __imr_try_fmt(struct imr_ctx *ctx, struct v4l2_format *f)
+{
+ struct v4l2_pix_format *pix = &f->fmt.pix;
+ u32 fourcc = pix->pixelformat;
+ int i;
+
+ /*
+ * both output and capture interface have the same set of
+ * supported formats
+ */
+ for (i = 0; i < ARRAY_SIZE(imr_lx4_formats); i++) {
+ if (fourcc == imr_lx4_formats[i].fourcc) {
+ /* fix-up format specification as needed */
+ pix->field = V4L2_FIELD_NONE;
+
+ v4l2_dbg(1, debug, &ctx->imr->v4l2_dev,
+ "format request: '%c%c%c%c', %dx%d\n",
+ (fourcc >> 0) & 0xff, (fourcc >> 8) & 0xff,
+ (fourcc >> 16) & 0xff, (fourcc >> 24) & 0xff,
+ pix->width, pix->height);
+
+ /* verify source/destination image dimensions */
+ if (V4L2_TYPE_IS_OUTPUT(f->type))
+ v4l_bound_align_image(&pix->width, 128, 2048, 7,
+ &pix->height, 16, 2048, 1,
+ 0);
+ else
+ v4l_bound_align_image(&pix->width, 64, 2048, 6,
+ &pix->height, 16, 2048, 1,
+ 0);
+
+ return i;
+ }
+ }
+
+ v4l2_err(&ctx->imr->v4l2_dev,
+ "unsupported format request: '%c%c%c%c'\n",
+ (fourcc >> 0) & 0xff, (fourcc >> 8) & 0xff,
+ (fourcc >> 16) & 0xff, (fourcc >> 24) & 0xff);
+
+ return -EINVAL;
+}
+
+/* capabilities query */
+static int imr_querycap(struct file *file, void *priv,
+ struct v4l2_capability *cap)
+{
+ strlcpy(cap->driver, DRV_NAME, sizeof(cap->driver));
+ strlcpy(cap->card, DRV_NAME, sizeof(cap->card));
+ strlcpy(cap->bus_info, DRV_NAME, sizeof(cap->bus_info));
+
+ cap->device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_VIDEO_OUTPUT |
+ V4L2_CAP_VIDEO_M2M | V4L2_CAP_STREAMING;
+
+ cap->capabilities = cap->device_caps | V4L2_CAP_DEVICE_CAPS;
+
+ return 0;
+}
+
+/* enumerate supported formats */
+static int imr_enum_fmt(struct file *file, void *priv, struct v4l2_fmtdesc *f)
+{
+ /* no distinction between output/capture formats */
+ if (f->index < ARRAY_SIZE(imr_lx4_formats)) {
+ const struct imr_format_info *fmt = &imr_lx4_formats[f->index];
+
+ strlcpy(f->description, fmt->name, sizeof(f->description));
+ f->pixelformat = fmt->fourcc;
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+/* retrieve current queue format; operation is locked ? */
+static int imr_g_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+ struct imr_q_data *q_data;
+ struct vb2_queue *vq;
+
+ vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ q_data = &ctx->queue[V4L2_TYPE_IS_OUTPUT(f->type) ? 0 : 1];
+
+ /* processing is locked? tbd */
+ f->fmt.pix = q_data->fmt;
+
+ return 0;
+}
+
+/* test particular format; operation is not locked */
+static int imr_try_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+ struct vb2_queue *vq;
+
+ /* make sure we have a queue of particular type */
+ vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ /* test if format is supported (adjust as appropriate) */
+ return __imr_try_fmt(ctx, f) >= 0 ? 0 : -EINVAL;
+}
+
+/* apply queue format; operation is locked ? */
+static int imr_s_fmt(struct file *file, void *priv, struct v4l2_format *f)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+ struct imr_q_data *q_data;
+ struct vb2_queue *vq;
+ int i;
+
+ vq = v4l2_m2m_get_vq(ctx->m2m_ctx, f->type);
+ if (!vq)
+ return -EINVAL;
+
+ /* check if queue is busy */
+ if (vb2_is_busy(vq))
+ return -EBUSY;
+
+ /* test if format is supported (adjust as appropriate) */
+ i = __imr_try_fmt(ctx, f);
+ if (i < 0)
+ return -EINVAL;
+
+ /* format is supported; save current format in a queue-specific data */
+ q_data = &ctx->queue[V4L2_TYPE_IS_OUTPUT(f->type) ? 0 : 1];
+
+ /* processing is locked? tbd */
+ q_data->fmt = f->fmt.pix;
+ q_data->flags = imr_lx4_formats[i].flags;
+
+ /* set default crop factors */
+ if (!V4L2_TYPE_IS_OUTPUT(f->type)) {
+ ctx->crop[0] = 0;
+ ctx->crop[1] = f->fmt.pix.width - 1;
+ ctx->crop[2] = 0;
+ ctx->crop[3] = f->fmt.pix.height - 1;
+ }
+
+ return 0;
+}
+
+static int imr_reqbufs(struct file *file, void *priv,
+ struct v4l2_requestbuffers *reqbufs)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+
+ return v4l2_m2m_reqbufs(file, ctx->m2m_ctx, reqbufs);
+}
+
+static int imr_querybuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+
+ return v4l2_m2m_querybuf(file, ctx->m2m_ctx, buf);
+}
+
+static int imr_qbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+
+ /* operation is protected with a queue lock */
+ WARN_ON(!mutex_is_locked(&ctx->imr->mutex));
+
+ /* verify the configuration is complete */
+ if (!V4L2_TYPE_IS_OUTPUT(buf->type) && !ctx->cfg) {
+ v4l2_err(&ctx->imr->v4l2_dev,
+ "stream configuration is not complete\n");
+ return -EINVAL;
+ }
+
+ return v4l2_m2m_qbuf(file, ctx->m2m_ctx, buf);
+}
+
+static int imr_dqbuf(struct file *file, void *priv, struct v4l2_buffer *buf)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+
+ return v4l2_m2m_dqbuf(file, ctx->m2m_ctx, buf);
+}
+
+static int imr_expbuf(struct file *file, void *priv,
+ struct v4l2_exportbuffer *eb)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+
+ return v4l2_m2m_expbuf(file, ctx->m2m_ctx, eb);
+}
+
+static int imr_streamon(struct file *file, void *priv, enum v4l2_buf_type type)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+
+ /* context is prepared for a streaming */
+ return v4l2_m2m_streamon(file, ctx->m2m_ctx, type);
+}
+
+static int imr_streamoff(struct file *file, void *priv, enum v4l2_buf_type type)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+
+ return v4l2_m2m_streamoff(file, ctx->m2m_ctx, type);
+}
+
+static int imr_g_crop(struct file *file, void *priv, struct v4l2_crop *cr)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+
+ /* subpixel resolution of output buffer is not counted here */
+ cr->c.left = ctx->crop[0];
+ cr->c.top = ctx->crop[2];
+ cr->c.width = ctx->crop[1] - ctx->crop[0];
+ cr->c.height = ctx->crop[3] - ctx->crop[2];
+
+ return 0;
+}
+
+static int imr_s_crop(struct file *file, void *priv, const struct v4l2_crop *cr)
+{
+ struct imr_ctx *ctx = fh_to_ctx(priv);
+ int x0 = cr->c.left;
+ int y0 = cr->c.top;
+ int x1 = x0 + cr->c.width;
+ int y1 = y0 + cr->c.height;
+
+ if (x0 < 0 || x1 >= 2048 || y0 < 0 || y1 >= 2048) {
+ v4l2_err(&ctx->imr->v4l2_dev, "invalid cropping: %d/%d/%d/%d\n",
+ x0, x1, y0, y1);
+ return -EINVAL;
+ }
+
+ /* subpixel resolution of output buffer is not counted here */
+ ctx->crop[0] = x0;
+ ctx->crop[1] = x1;
+ ctx->crop[2] = y0;
+ ctx->crop[3] = y1;
+
+ return 0;
+}
+
+/* customized I/O control processing */
+static long imr_default(struct file *file, void *fh, bool valid_prio,
+ unsigned int cmd, void *arg)
+{
+ struct imr_ctx *ctx = fh_to_ctx(fh);
+
+ switch (cmd) {
+ case VIDIOC_IMR_MESH:
+ /* set mesh data */
+ return imr_ioctl_map(ctx, arg);
+
+ default:
+ return -ENOTTY;
+ }
+}
+
+static const struct v4l2_ioctl_ops imr_ioctl_ops = {
+ .vidioc_querycap = imr_querycap,
+
+ .vidioc_enum_fmt_vid_cap = imr_enum_fmt,
+ .vidioc_enum_fmt_vid_out = imr_enum_fmt,
+ .vidioc_g_fmt_vid_cap = imr_g_fmt,
+ .vidioc_g_fmt_vid_out = imr_g_fmt,
+ .vidioc_try_fmt_vid_cap = imr_try_fmt,
+ .vidioc_try_fmt_vid_out = imr_try_fmt,
+ .vidioc_s_fmt_vid_cap = imr_s_fmt,
+ .vidioc_s_fmt_vid_out = imr_s_fmt,
+
+ .vidioc_reqbufs = imr_reqbufs,
+ .vidioc_querybuf = imr_querybuf,
+ .vidioc_qbuf = imr_qbuf,
+ .vidioc_dqbuf = imr_dqbuf,
+ .vidioc_expbuf = imr_expbuf,
+ .vidioc_streamon = imr_streamon,
+ .vidioc_streamoff = imr_streamoff,
+
+ .vidioc_g_crop = imr_g_crop,
+ .vidioc_s_crop = imr_s_crop,
+
+ .vidioc_default = imr_default,
+};
+
+/*******************************************************************************
+ * Generic device file operations
+ ******************************************************************************/
+
+static int imr_open(struct file *file)
+{
+ struct imr_device *imr = video_drvdata(file);
+ struct video_device *vfd = video_devdata(file);
+ struct imr_ctx *ctx;
+ int ret;
+
+ /* allocate processing context associated with given instance */
+ ctx = kzalloc(sizeof(*ctx), GFP_KERNEL);
+ if (!ctx)
+ return -ENOMEM;
+
+ /* initialize per-file-handle structure */
+ v4l2_fh_init(&ctx->fh, vfd);
+ file->private_data = &ctx->fh;
+ v4l2_fh_add(&ctx->fh);
+
+ /* set default source / destination formats - need that? */
+ ctx->imr = imr;
+ ctx->queue[0].fmt.pixelformat = 0;
+ ctx->queue[1].fmt.pixelformat = 0;
+
+ /* set default cropping parameters */
+ ctx->crop[1] = ctx->crop[3] = 0x3FF;
+
+ /* initialize M2M processing context */
+ ctx->m2m_ctx = v4l2_m2m_ctx_init(imr->m2m_dev, ctx, imr_queue_init);
+ if (IS_ERR(ctx->m2m_ctx)) {
+ ret = PTR_ERR(ctx->m2m_ctx);
+ goto v4l_prepare_rollback;
+ }
+
+ /* lock access to global device data */
+ if (mutex_lock_interruptible(&imr->mutex)) {
+ ret = -ERESTARTSYS;
+ goto v4l_prepare_rollback;
+ }
+
+ /* bring-up device as needed */
+ if (imr->refcount == 0) {
+ ret = clk_prepare_enable(imr->clock);
+ if (ret < 0)
+ goto device_prepare_rollback;
+ }
+
+ imr->refcount++;
+
+ mutex_unlock(&imr->mutex);
+
+ v4l2_dbg(1, debug, &imr->v4l2_dev, "IMR device opened (refcount=%u)\n",
+ imr->refcount);
+
+ return 0;
+
+device_prepare_rollback:
+ /* unlock global device data */
+ mutex_unlock(&imr->mutex);
+
+v4l_prepare_rollback:
+ /* destroy context */
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+ kfree(ctx);
+
+ return ret;
+}
+
+static int imr_release(struct file *file)
+{
+ struct imr_ctx *ctx = fh_to_ctx(file->private_data);
+ struct imr_device *imr = video_drvdata(file);
+
+ /* I don't need to get a device-scope lock here really - tbd */
+ mutex_lock(&imr->mutex);
+
+ /* destroy M2M device processing context */
+ v4l2_m2m_ctx_release(ctx->m2m_ctx);
+ v4l2_fh_del(&ctx->fh);
+ v4l2_fh_exit(&ctx->fh);
+
+ /* drop active configuration as needed */
+ imr_cfg_unref(ctx, ctx->cfg);
+
+ /* make sure there are no more active configs */
+ WARN_ON(ctx->cfg_num);
+
+ /* destroy context data */
+ kfree(ctx);
+
+ /* disable hardware operation */
+ if (--imr->refcount == 0)
+ clk_disable_unprepare(imr->clock);
+
+ mutex_unlock(&imr->mutex);
+
+ v4l2_dbg(1, debug, &imr->v4l2_dev, "closed device instance\n");
+
+ return 0;
+}
+
+static unsigned int imr_poll(struct file *file, struct poll_table_struct *wait)
+{
+ struct imr_ctx *ctx = fh_to_ctx(file->private_data);
+ struct imr_device *imr = video_drvdata(file);
+ unsigned int res;
+
+ if (mutex_lock_interruptible(&imr->mutex))
+ return -ERESTARTSYS;
+
+ res = v4l2_m2m_poll(file, ctx->m2m_ctx, wait);
+ mutex_unlock(&imr->mutex);
+
+ return res;
+}
+
+static int imr_mmap(struct file *file, struct vm_area_struct *vma)
+{
+ struct imr_device *imr = video_drvdata(file);
+ struct imr_ctx *ctx = fh_to_ctx(file->private_data);
+ int ret;
+
+ /* should we protect all M2M operations with mutex? - tbd */
+ if (mutex_lock_interruptible(&imr->mutex))
+ return -ERESTARTSYS;
+
+ ret = v4l2_m2m_mmap(file, ctx->m2m_ctx, vma);
+
+ mutex_unlock(&imr->mutex);
+
+ return ret;
+}
+
+static const struct v4l2_file_operations imr_fops = {
+ .owner = THIS_MODULE,
+ .open = imr_open,
+ .release = imr_release,
+ .poll = imr_poll,
+ .mmap = imr_mmap,
+ .unlocked_ioctl = video_ioctl2,
+};
+
+/*******************************************************************************
+ * M2M device interface
+ ******************************************************************************/
+
+/* job execution function */
+static void imr_device_run(void *priv)
+{
+ struct imr_ctx *ctx = priv;
+ struct imr_device *imr = ctx->imr;
+ struct vb2_buffer *src_buf, *dst_buf;
+ u32 src_addr, dst_addr;
+ unsigned long flags;
+ struct imr_cfg *cfg;
+
+ v4l2_dbg(3, debug, &imr->v4l2_dev, "run next job...\n");
+
+ /* protect access to internal device state */
+ spin_lock_irqsave(&imr->lock, flags);
+
+ /* retrieve input/output buffers */
+ src_buf = v4l2_m2m_next_src_buf(ctx->m2m_ctx);
+ dst_buf = v4l2_m2m_next_dst_buf(ctx->m2m_ctx);
+
+ /* take configuration pointer associated with input buffer */
+ cfg = to_imr_buffer(to_vb2_v4l2_buffer(src_buf))->cfg;
+
+ /* cancel software reset state as needed */
+ iowrite32(0, imr->mmio + IMR_CR);
+
+ /* set cropping data with respect to destination sub-pixel mode */
+ iowrite32(ctx->crop[0] << cfg->dst_subpixel, imr->mmio + IMR_XMINR);
+ iowrite32(ctx->crop[1] << cfg->dst_subpixel, imr->mmio + IMR_XMAXR);
+ iowrite32(ctx->crop[2] << cfg->dst_subpixel, imr->mmio + IMR_YMINR);
+ iowrite32(ctx->crop[3] << cfg->dst_subpixel, imr->mmio + IMR_YMAXR);
+
+ /*
+ * adjust source/destination parameters of the program
+ * (interleaved/semiplanar)
+ */
+ *cfg->src_pa_ptr[0] = src_addr =
+ (u32)vb2_dma_contig_plane_dma_addr(src_buf, 0);
+ *cfg->dst_pa_ptr[0] = dst_addr =
+ (u32)vb2_dma_contig_plane_dma_addr(dst_buf, 0);
+
+ /* adjust source/destination parameters of the UV-plane as needed */
+ if (cfg->src_pa_ptr[1] && cfg->dst_pa_ptr[1]) {
+ *cfg->src_pa_ptr[1] = src_addr +
+ ctx->queue[0].fmt.width * ctx->queue[0].fmt.height;
+ *cfg->dst_pa_ptr[1] = dst_addr +
+ ctx->queue[1].fmt.width * ctx->queue[1].fmt.height;
+ }
+
+ v4l2_dbg(3, debug, &imr->v4l2_dev,
+ "process buffer-pair 0x%08x:0x%08x\n",
+ *cfg->src_pa_ptr[0], *cfg->dst_pa_ptr[0]);
+
+ /* force clearing of status register bits */
+ iowrite32(IMR_SR_TRA | IMR_SR_IER | IMR_SR_INT, imr->mmio + IMR_SRCR);
+
+ /* unmask/enable interrupts */
+ iowrite32(ioread32(imr->mmio + IMR_ICR) |
+ (IMR_ICR_TRAENB | IMR_ICR_IERENB | IMR_ICR_INTENB),
+ imr->mmio + IMR_ICR);
+ iowrite32(ioread32(imr->mmio + IMR_IMR) &
+ ~(IMR_IMR_TRAM | IMR_IMR_IEM | IMR_IMR_INM),
+ imr->mmio + IMR_IMR);
+
+ /* set display list address */
+ iowrite32(cfg->dl_dma_addr + cfg->dl_start_offset,
+ imr->mmio + IMR_DLSAR);
+
+ /*
+ * explicitly flush any pending write operations
+ * (don't need that, I guess)
+ */
+ wmb();
+
+ /* start rendering operation */
+ iowrite32(IMR_CR_RS, imr->mmio + IMR_CR);
+
+ /* timestamp input buffer */
+ src_buf->timestamp = ktime_get_ns();
+
+ /* unlock device access */
+ spin_unlock_irqrestore(&imr->lock, flags);
+
+ v4l2_dbg(1, debug, &imr->v4l2_dev,
+ "rendering started: status=%x, DLSAR=0x%08x, DLPR=0x%08x\n",
+ ioread32(imr->mmio + IMR_SR), ioread32(imr->mmio + IMR_DLSAR),
+ ioread32(imr->mmio + IMR_DLPR));
+}
+
+/* check whether a job is ready for execution */
+static int imr_job_ready(void *priv)
+{
+ /* no specific requirements on the job readiness */
+ return 1;
+}
+
+/* abort currently processed job */
+static void imr_job_abort(void *priv)
+{
+ struct imr_ctx *ctx = priv;
+ struct imr_device *imr = ctx->imr;
+ unsigned long flags;
+
+ /* protect access to internal device state */
+ spin_lock_irqsave(&imr->lock, flags);
+
+ /*
+ * make sure current job is still current (may get finished by
+ * interrupt already)
+ */
+ if (v4l2_m2m_get_curr_priv(imr->m2m_dev) == ctx) {
+ v4l2_dbg(1, debug, &imr->v4l2_dev,
+ "abort job: status=%x, DLSAR=0x%08x, DLPR=0x%08x\n",
+ ioread32(imr->mmio + IMR_SR),
+ ioread32(imr->mmio + IMR_DLSAR),
+ ioread32(imr->mmio + IMR_DLPR));
+
+ /*
+ * resetting the module while operation is active may lead to
+ * hw-stall
+ */
+ spin_unlock_irqrestore(&imr->lock, flags);
+ } else {
+ spin_unlock_irqrestore(&imr->lock, flags);
+ v4l2_dbg(1, debug, &imr->v4l2_dev,
+ "job has completed already\n");
+ }
+}
+
+/* M2M interface definition */
+static struct v4l2_m2m_ops imr_m2m_ops = {
+ .device_run = imr_device_run,
+ .job_ready = imr_job_ready,
+ .job_abort = imr_job_abort,
+};
+
+/*******************************************************************************
+ * Interrupt handling
+ ******************************************************************************/
+
+static irqreturn_t imr_irq_handler(int irq, void *data)
+{
+ struct imr_device *imr = data;
+ struct vb2_v4l2_buffer *src_buf, *dst_buf;
+ bool finish = false;
+ u32 status;
+ struct imr_ctx *ctx;
+
+ /* check and ack interrupt status */
+ status = ioread32(imr->mmio + IMR_SR);
+ iowrite32(status, imr->mmio + IMR_SRCR);
+ if (!(status & (IMR_SR_INT | IMR_SR_IER | IMR_SR_TRA))) {
+ v4l2_err(&imr->v4l2_dev, "spurious interrupt: %x\n", status);
+ return IRQ_NONE;
+ }
+
+ /* protect access to current context */
+ spin_lock(&imr->lock);
+
+ /* get current job context (may have been cancelled already) */
+ ctx = v4l2_m2m_get_curr_priv(imr->m2m_dev);
+ if (!ctx) {
+ v4l2_dbg(3, debug, &imr->v4l2_dev, "no active job\n");
+ goto handled;
+ }
+
+ /* remove buffers (may have been removed already?) */
+ src_buf = v4l2_m2m_src_buf_remove(ctx->m2m_ctx);
+ dst_buf = v4l2_m2m_dst_buf_remove(ctx->m2m_ctx);
+ if (!src_buf || !dst_buf) {
+ v4l2_dbg(3, debug, &imr->v4l2_dev,
+ "no buffers associated with current context\n");
+ goto handled;
+ }
+
+ finish = true;
+
+ /* check for a TRAP interrupt indicating completion of current DL */
+ if (status & IMR_SR_TRA) {
+ /* operation completed normally; timestamp output buffer */
+ dst_buf->vb2_buf.timestamp = ktime_get_ns();
+ if (src_buf->flags & V4L2_BUF_FLAG_TIMECODE)
+ dst_buf->timecode = src_buf->timecode;
+ dst_buf->flags = src_buf->flags &
+ (V4L2_BUF_FLAG_TIMECODE | V4L2_BUF_FLAG_KEYFRAME |
+ V4L2_BUF_FLAG_PFRAME | V4L2_BUF_FLAG_BFRAME |
+ V4L2_BUF_FLAG_TSTAMP_SRC_MASK);
+ dst_buf->sequence = src_buf->sequence = ctx->sequence++;
+ v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_DONE);
+ v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_DONE);
+
+ v4l2_dbg(3, debug, &imr->v4l2_dev,
+ "buffers <0x%08x,0x%08x> done\n",
+ (u32)vb2_dma_contig_plane_dma_addr
+ (&src_buf->vb2_buf, 0),
+ (u32)vb2_dma_contig_plane_dma_addr
+ (&dst_buf->vb2_buf, 0));
+ } else {
+ /*
+ * operation completed in error; no way to understand
+ * what exactly went wrong
+ */
+ v4l2_m2m_buf_done(src_buf, VB2_BUF_STATE_ERROR);
+ v4l2_m2m_buf_done(dst_buf, VB2_BUF_STATE_ERROR);
+
+ v4l2_dbg(3, debug, &imr->v4l2_dev,
+ "buffers <0x%08x,0x%08x> done in error\n",
+ (u32)vb2_dma_contig_plane_dma_addr
+ (&src_buf->vb2_buf, 0),
+ (u32)vb2_dma_contig_plane_dma_addr
+ (&dst_buf->vb2_buf, 0));
+ }
+
+handled:
+ spin_unlock(&imr->lock);
+
+ /* finish current job (and start any pending) */
+ if (finish)
+ v4l2_m2m_job_finish(imr->m2m_dev, ctx->m2m_ctx);
+
+ return IRQ_HANDLED;
+}
+
+/*******************************************************************************
+ * Device probing / removal interface
+ ******************************************************************************/
+
+static int imr_probe(struct platform_device *pdev)
+{
+ struct imr_device *imr;
+ struct resource *res;
+ int ret;
+
+ imr = devm_kzalloc(&pdev->dev, sizeof(*imr), GFP_KERNEL);
+ if (!imr)
+ return -ENOMEM;
+
+ mutex_init(&imr->mutex);
+ spin_lock_init(&imr->lock);
+ imr->dev = &pdev->dev;
+
+ /* memory-mapped registers */
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ imr->mmio = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(imr->mmio))
+ return PTR_ERR(imr->mmio);
+
+ /* interrupt service routine registration */
+ imr->irq = ret = platform_get_irq(pdev, 0);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "cannot find IRQ\n");
+ return ret;
+ }
+
+ ret = devm_request_irq(&pdev->dev, imr->irq, imr_irq_handler, 0,
+ dev_name(&pdev->dev), imr);
+ if (ret) {
+ dev_err(&pdev->dev, "cannot claim IRQ %d\n", imr->irq);
+ return ret;
+ }
+
+ imr->clock = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(imr->clock)) {
+ dev_err(&pdev->dev, "cannot get clock\n");
+ return PTR_ERR(imr->clock);
+ }
+
+ /* create v4l2 device */
+ ret = v4l2_device_register(&pdev->dev, &imr->v4l2_dev);
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to register v4l2 device\n");
+ return ret;
+ }
+
+ /* create mem2mem device handle */
+ imr->m2m_dev = v4l2_m2m_init(&imr_m2m_ops);
+ if (IS_ERR(imr->m2m_dev)) {
+ v4l2_err(&imr->v4l2_dev, "Failed to init mem2mem device\n");
+ ret = PTR_ERR(imr->m2m_dev);
+ goto device_register_rollback;
+ }
+
+ strlcpy(imr->video_dev.name, dev_name(&pdev->dev),
+ sizeof(imr->video_dev.name));
+ imr->video_dev.fops = &imr_fops;
+ imr->video_dev.ioctl_ops = &imr_ioctl_ops;
+ imr->video_dev.minor = -1;
+ imr->video_dev.release = video_device_release_empty;
+ imr->video_dev.lock = &imr->mutex;
+ imr->video_dev.v4l2_dev = &imr->v4l2_dev;
+ imr->video_dev.vfl_dir = VFL_DIR_M2M;
+
+ ret = video_register_device(&imr->video_dev, VFL_TYPE_GRABBER, -1);
+ if (ret) {
+ v4l2_err(&imr->v4l2_dev, "Failed to register video device\n");
+ goto m2m_init_rollback;
+ }
+
+ video_set_drvdata(&imr->video_dev, imr);
+ platform_set_drvdata(pdev, imr);
+
+ v4l2_info(&imr->v4l2_dev,
+ "IMR device (pdev: %d) registered as /dev/video%d\n",
+ pdev->id, imr->video_dev.num);
+
+ return 0;
+
+m2m_init_rollback:
+ v4l2_m2m_release(imr->m2m_dev);
+
+device_register_rollback:
+ v4l2_device_unregister(&imr->v4l2_dev);
+
+ return ret;
+}
+
+static int imr_remove(struct platform_device *pdev)
+{
+ struct imr_device *imr = platform_get_drvdata(pdev);
+
+ video_unregister_device(&imr->video_dev);
+ v4l2_m2m_release(imr->m2m_dev);
+ v4l2_device_unregister(&imr->v4l2_dev);
+
+ return 0;
+}
+
+/*******************************************************************************
+ * Power management
+ ******************************************************************************/
+
+#ifdef CONFIG_PM_SLEEP
+
+/* device suspend hook; clock control only - tbd */
+static int imr_pm_suspend(struct device *dev)
+{
+ struct imr_device *imr = dev_get_drvdata(dev);
+
+ WARN_ON(mutex_is_locked(&imr->mutex));
+
+ if (imr->refcount == 0)
+ return 0;
+
+ clk_disable_unprepare(imr->clock);
+
+ return 0;
+}
+
+/* device resume hook; clock control only */
+static int imr_pm_resume(struct device *dev)
+{
+ struct imr_device *imr = dev_get_drvdata(dev);
+
+ WARN_ON(mutex_is_locked(&imr->mutex));
+
+ if (imr->refcount == 0)
+ return 0;
+
+ clk_prepare_enable(imr->clock);
+
+ return 0;
+}
+
+#endif /* CONFIG_PM_SLEEP */
+
+/* power management callbacks */
+static const struct dev_pm_ops imr_pm_ops = {
+ SET_SYSTEM_SLEEP_PM_OPS(imr_pm_suspend, imr_pm_resume)
+};
+
+/* device table */
+static const struct of_device_id imr_of_match[] = {
+ { .compatible = "renesas,imr-lx4" },
+ { },
+};
+
+/* platform driver interface */
+static struct platform_driver imr_platform_driver = {
+ .probe = imr_probe,
+ .remove = imr_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "imr",
+ .pm = &imr_pm_ops,
+ .of_match_table = imr_of_match,
+ },
+};
+
+module_platform_driver(imr_platform_driver);
+
+MODULE_ALIAS("imr");
+MODULE_AUTHOR("Cogent Embedded Inc. <sources@xxxxxxxxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Renesas IMR-LX4 Driver");
+MODULE_LICENSE("GPL");
Index: media_tree/include/uapi/linux/rcar_imr.h
===================================================================
--- /dev/null
+++ media_tree/include/uapi/linux/rcar_imr.h
@@ -0,0 +1,94 @@
+/*
+ * rcar_imr.h -- R-Car IMR-LX4 Driver UAPI
+ *
+ * Copyright (C) 2016-2017 Cogent Embedded, Inc. <source@xxxxxxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+
+#ifndef __RCAR_IMR_H
+#define __RCAR_IMR_H
+
+#include <linux/videodev2.h>
+
+/*******************************************************************************
+ * Mapping specification descriptor
+ ******************************************************************************/
+
+struct imr_map_desc {
+ /* mapping types */
+ u32 type;
+
+ /* total size of the mesh structure */
+ u32 size;
+
+ /* map-specific user-pointer */
+ void *data;
+} __packed;
+
+/* regular mesh specification */
+#define IMR_MAP_MESH (1 << 0)
+
+/* auto-generated source coordinates */
+#define IMR_MAP_AUTOSG (1 << 1)
+
+/* auto-generated destination coordinates */
+#define IMR_MAP_AUTODG (1 << 2)
+
+/* luminance correction flag */
+#define IMR_MAP_LUCE (1 << 3)
+
+/* chromacity correction flag */
+#define IMR_MAP_CLCE (1 << 4)
+
+/* vertex clockwise-mode order */
+#define IMR_MAP_TCM (1 << 5)
+
+/* source coordinate decimal point position bit index */
+#define __IMR_MAP_UVDPOR_SHIFT 8
+#define __IMR_MAP_UVDPOR(v) (((v) >> __IMR_MAP_UVDPOR_SHIFT) & 0x7)
+#define IMR_MAP_UVDPOR(n) (((n) & 0x7) << __IMR_MAP_UVDPOR_SHIFT)
+
+/* destination coordinate sub-pixel mode */
+#define IMR_MAP_DDP (1 << 11)
+
+/* luminance correction offset decimal point position */
+#define __IMR_MAP_YLDPO_SHIFT 12
+#define __IMR_MAP_YLDPO(v) (((v) >> __IMR_MAP_YLDPO_SHIFT) & 0x7)
+#define IMR_MAP_YLDPO(n) (((n) & 0x7) << __IMR_MAP_YLDPO_SHIFT)
+
+/* chromacity (U) correction offset decimal point position */
+#define __IMR_MAP_UBDPO_SHIFT 15
+#define __IMR_MAP_UBDPO(v) (((v) >> __IMR_MAP_UBDPO_SHIFT) & 0x7)
+#define IMR_MAP_UBDPO(n) (((n) & 0x7) << __IMR_MAP_UBDPO_SHIFT)
+
+/* chromacity (V) correction offset decimal point position */
+#define __IMR_MAP_VRDPO_SHIFT 18
+#define __IMR_MAP_VRDPO(v) (((v) >> __IMR_MAP_VRDPO_SHIFT) & 0x7)
+#define IMR_MAP_VRDPO(n) (((n) & 0x7) << __IMR_MAP_VRDPO_SHIFT)
+
+/* regular mesh specification */
+struct imr_mesh {
+ /* rectangular mesh size */
+ u16 rows, columns;
+
+ /* mesh parameters */
+ u16 x0, y0, dx, dy;
+} __packed;
+
+/* VBO descriptor */
+struct imr_vbo {
+ /* number of triangles */
+ u16 num;
+} __packed;
+
+/*******************************************************************************
+ * Private IOCTL codes
+ ******************************************************************************/
+
+#define VIDIOC_IMR_MESH _IOW('V', BASE_VIDIOC_PRIVATE + 0, struct imr_map_desc)
+
+#endif /* __RCAR_IMR_H */
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
