Hi Kishon,
Às 5:18 AM de 3/7/2017, Kishon Vijay Abraham I escreveu:
> Hi Joao,
>
> On Friday 17 February 2017 10:50 PM, Joao Pinto wrote:
>> Às 9:50 AM de 2/17/2017, Kishon Vijay Abraham I escreveu:
>>> Add endpoint mode support to designware driver. This uses the
>>> EP Core layer introduced recently to add endpoint mode support.
>>> *Any* function driver can now use this designware device
>>> in order to achieve the EP functionality.
>>>
>>> Signed-off-by: Kishon Vijay Abraham I <kishon@xxxxxx>
>>> ---
>>> drivers/pci/dwc/Kconfig | 5 +
>>> drivers/pci/dwc/Makefile | 1 +
>>> drivers/pci/dwc/pcie-designware-ep.c | 342 ++++++++++++++++++++++++++++++++++
>>> drivers/pci/dwc/pcie-designware.c | 51 +++++
>>> drivers/pci/dwc/pcie-designware.h | 72 +++++++
>>> 5 files changed, 471 insertions(+)
>>> create mode 100644 drivers/pci/dwc/pcie-designware-ep.c
>>>
>
> <snip>
>
>>> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
>>> index 686945d..49b28c8 100644
>>> --- a/drivers/pci/dwc/pcie-designware.c
>>> +++ b/drivers/pci/dwc/pcie-designware.c
>>> @@ -173,6 +173,57 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
>>> dev_err(pci->dev, "iATU is not being enabled\n");
>>> }
>>>
>>> +int dw_pcie_prog_inbound_atu(struct dw_pcie *pci, int index, int bar,
>>> + u64 cpu_addr, enum dw_pcie_as_type as_type)
>>> +{
>>> + int type;
>>> + void __iomem *base = pci->dbi_base;
>>> +
>>> + dw_pcie_write_dbi(pci, base, PCIE_ATU_VIEWPORT, 0x4,
>>> + PCIE_ATU_REGION_INBOUND | index);
>>> + dw_pcie_write_dbi(pci, base, PCIE_ATU_LOWER_TARGET, 0x4,
>>> + lower_32_bits(cpu_addr));
>>> + dw_pcie_write_dbi(pci, base, PCIE_ATU_UPPER_TARGET, 0x4,
>>> + upper_32_bits(cpu_addr));
>>> +
>>> + switch (as_type) {
>>> + case DW_PCIE_AS_MEM:
>>> + type = PCIE_ATU_TYPE_MEM;
>>> + break;
>>> + case DW_PCIE_AS_IO:
>>> + type = PCIE_ATU_TYPE_IO;
>>> + break;
>>> + default:
>>> + return -EINVAL;
>>> + }
>>> +
>>> + dw_pcie_write_dbi(pci, base, PCIE_ATU_CR1, 0x4, type);
>>> + dw_pcie_write_dbi(pci, base, PCIE_ATU_CR2, 0x4, PCIE_ATU_ENABLE |
>>> + PCIE_ATU_BAR_MODE_ENABLE | (bar << 8));
>>> + return 0;
>>> +}
>>> +
>>
>> This Atu programming is for PCI Cores <= 4.70. Please follow the same approach as:
>> https://urldefense.proofpoint.com/v2/url?u=https-3A__git.kernel.org_cgit_linux_kernel_git_helgaas_pci.git_tree_drivers_pci_dwc_pcie-2Ddesignware.c-3Fh-3Dpci_host-2Ddesignware-23n95&d=DwID-g&c=DPL6_X_6JkXFx7AXWqB0tg&r=s2fO0hii0OGNOv9qQy_HRXy-xAJUD1NNoEcc3io_kx0&m=MqqHFJBR0jj9ZQILcUJEd-CQkTihuOSf69e-XxZJvRs&s=fY5N7Mt9iszsAI04DPm-cSC6cSE5P2axHUFQ9GOx-2A&e=
>
> Can you provide PCIE_GET_ATU_INB_UNR_REG_OFFSET (similar to
> PCIE_GET_ATU_OUTB_UNR_REG_OFFSET)?
Yes of course, I will send you the definition soon.
Thanks,
Joao
>
> Thanks
> Kishon
>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
