On Fri, Mar 03, 2017 at 06:19:24PM +0300, Alexey Brodkin wrote:
> We used to use "encoder-slave" property in PGU's
> Device Tree node to refer to the encoder, but since there's
> a way to find it with some code smarts we get rid of
> obviously extra complication in PGU node.
>
> Again inspired by ARM's HDLCD code.
Again, Reviewed-by: Liviu Dudau <Liviu.Dudau@xxxxxxx> :)
>
> Signed-off-by: Alexey Brodkin <abrodkin@xxxxxxxxxxxx>
> Cc: Liviu Dudau <Liviu.Dudau@xxxxxxx>
> Cc: Daniel Vetter <daniel@xxxxxxxx>
> Cc: David Airlie <airlied@xxxxxxxx>
> Cc: Rob Herring <robh+dt@xxxxxxxxxx>
> ---
> arch/arc/boot/dts/axs10x_mb.dtsi | 1 -
> drivers/gpu/drm/arc/arcpgu_drv.c | 23 +++++++++++++++++------
> 2 files changed, 17 insertions(+), 7 deletions(-)
>
> diff --git a/arch/arc/boot/dts/axs10x_mb.dtsi b/arch/arc/boot/dts/axs10x_mb.dtsi
> index 41cfb29b62c1..2fe030186b9d 100644
> --- a/arch/arc/boot/dts/axs10x_mb.dtsi
> +++ b/arch/arc/boot/dts/axs10x_mb.dtsi
> @@ -287,7 +287,6 @@
> pgu@17000 {
> compatible = "snps,arcpgu";
> reg = <0x17000 0x400>;
> - encoder-slave = <&adv7511>;
> clocks = <&pguclk>;
> clock-names = "pxlclk";
> memory-region = <&frame_buffer>;
> diff --git a/drivers/gpu/drm/arc/arcpgu_drv.c b/drivers/gpu/drm/arc/arcpgu_drv.c
> index 5c82f52fba80..b1b2286bda95 100644
> --- a/drivers/gpu/drm/arc/arcpgu_drv.c
> +++ b/drivers/gpu/drm/arc/arcpgu_drv.c
> @@ -19,6 +19,7 @@
> #include <drm/drm_fb_cma_helper.h>
> #include <drm/drm_gem_cma_helper.h>
> #include <drm/drm_atomic_helper.h>
> +#include <linux/of_graph.h>
> #include <linux/of_reserved_mem.h>
>
> #include "arcpgu.h"
> @@ -83,7 +84,7 @@ static int arcpgu_load(struct drm_device *drm)
> {
> struct platform_device *pdev = to_platform_device(drm->dev);
> struct arcpgu_drm_private *arcpgu;
> - struct device_node *encoder_node;
> + struct device_node *encoder, *port;
> struct resource *res;
> int ret;
>
> @@ -118,14 +119,24 @@ static int arcpgu_load(struct drm_device *drm)
> if (arc_pgu_setup_crtc(drm) < 0)
> return -ENODEV;
>
> - /* find the encoder node and initialize it */
> - encoder_node = of_parse_phandle(drm->dev->of_node, "encoder-slave", 0);
> - if (encoder_node) {
> - ret = arcpgu_drm_hdmi_init(drm, encoder_node);
> - of_node_put(encoder_node);
> + /* There is only one output port inside each device, find it */
> + port = of_graph_get_next_endpoint(pdev->dev.of_node, NULL);
> +
> + if (port) {
> + if (of_device_is_available(port))
> + encoder = of_graph_get_remote_port_parent(port);
> + of_node_put(port);
> + }
You must've been looking at some old version. Current version in -next uses
of_graph_get_remote_node() to replace all those lines you have added (see Rob
Herring's series to introduce of_graph_get_remote_node() function)
Best regards,
Liviu
> +
> + if (encoder && of_device_is_available(encoder)) {
> + dev_info(drm->dev, "Found encoder node %s, proceeding with it\n",
> + encoder->name);
> + ret = arcpgu_drm_hdmi_init(drm, encoder);
> + of_node_put(encoder);
> if (ret < 0)
> return ret;
> } else {
> + dev_info(drm->dev, "No encoder node, assume simulation\n");
> ret = arcpgu_drm_sim_init(drm, NULL);
> if (ret < 0)
> return ret;
> --
> 2.7.4
>
--
====================
| I would like to |
| fix the world, |
| but they're not |
| giving me the |
\ source code! /
---------------
¯\_(ツ)_/¯
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
