Hi Chris,
On Thu, Mar 2, 2017 at 9:17 PM, Chris Brandt <Chris.Brandt@xxxxxxxxxxx> wrote:
> On Tuesday, February 21, 2017, jacopo mondi wrote:
>> > + gpio-controller;
>> > + #gpio-cells = <2>;
>> > + gpio-ranges = <&pinctrl 0 0 16>;
>>
>> Not all ports have 16 pins available.
>> This is one of the differences between different RZ/A1 SoC versions
>> (RZ/A1H, RZ/A1L etc)
>>
>> I'll change the number of pins to the actual available ones on each port
>> for r7s72100 (RZ/A1H)
>
> But wait, what if someone wants to use a RZ/A1L???
>
> I don't want to make a separate dtsi file for RZ/A1L.
>
> Is it possible to change the number of port pins in the board dts file?
> For example:
> RZ/A1H: P5_0 - P5_10
> RZ/A1L: P5_0 - P5_16
That's 17 pins, not 16?
>
> So, in a rza1l-board.dts file I would put:
>
> &port5 {
> gpio-ranges = <&pinctrl 0 80 16>;
> }
>
> Will this work?
Yes, overriding should work. But the number of pins is an SoC-property, not
a board-property?
Are the differences between RZ/A1H and RZ/A1L just the number of pins?
If yes, you could use a hierarchical DTS structure:
rza1h-<board>.dts:
#include "rza1h.dtsi"
// board specifics here
rza1l-<board>.dts:
#include "rza1l.dtsi"
// board specifics here
rza1h.dtsi:
#include "rza.dtsi" // r7s72100.dtsi?
// base SoC overrides
&port5 {
gpio-ranges = <&pinctrl 0 80 11>;
}
rza1l.dtsi:
#include "rza.dtsi" // r7s72100.dtsi?
// base SoC overrides
&port5 {
gpio-ranges = <&pinctrl 0 80 16>;
}
Actual naming of DTS files TBD.
We could also decide to not have rza1h.dtsi, and assume the base dtsi is for
RZ/A1H.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@xxxxxxxxxxxxxx
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
