On 03/02/2017 05:57 AM, Chris Brandt wrote:
Adds a watchdog timer driver for the Renesas RZ/A Series SoCs. A reset
handler is also included since a WDT overflow is the only method for
restarting an RZ/A SoC.
Signed-off-by: Chris Brandt <chris.brandt@xxxxxxxxxxx>
---
drivers/watchdog/Kconfig | 8 ++
drivers/watchdog/Makefile | 1 +
drivers/watchdog/rza_wdt.c | 208 +++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 217 insertions(+)
create mode 100644 drivers/watchdog/rza_wdt.c
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index acb00b5..123c516 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -701,6 +701,14 @@ config RENESAS_WDT
This driver adds watchdog support for the integrated watchdogs in the
Renesas R-Car and other SH-Mobile SoCs (usually named RWDT or SWDT).
+config RENESAS_RZAWDT
+ tristate "Renesas RZ/A WDT Watchdog"
+ depends on ARCH_RENESAS || COMPILE_TEST
+ select WATCHDOG_CORE
+ help
+ This driver adds watchdog support for the integrated watchdogs in the
+ Renesas RZ/A SoCs. These watchdogs can be used to reset a system.
+
config ASPEED_WATCHDOG
tristate "Aspeed 2400 watchdog support"
depends on ARCH_ASPEED || COMPILE_TEST
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 0c3d35e..84b897c 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -81,6 +81,7 @@ obj-$(CONFIG_LPC18XX_WATCHDOG) += lpc18xx_wdt.o
obj-$(CONFIG_BCM7038_WDT) += bcm7038_wdt.o
obj-$(CONFIG_ATLAS7_WATCHDOG) += atlas7_wdt.o
obj-$(CONFIG_RENESAS_WDT) += renesas_wdt.o
+obj-$(CONFIG_RENESAS_RZAWDT) += rza_wdt.o
obj-$(CONFIG_ASPEED_WATCHDOG) += aspeed_wdt.o
# AVR32 Architecture
diff --git a/drivers/watchdog/rza_wdt.c b/drivers/watchdog/rza_wdt.c
new file mode 100644
index 0000000..17442c5
--- /dev/null
+++ b/drivers/watchdog/rza_wdt.c
@@ -0,0 +1,208 @@
+/*
+ * Renesas RZ/A Series WDT Driver
+ *
+ * Copyright (C) 2017 Renesas Electronics America, Inc.
+ * Copyright (C) 2017 Chris Brandt
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ *
The above two lines are unnecessary.
+ */
+
+#include <linux/platform_device.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/delay.h>
+#include <linux/watchdog.h>
+#include <linux/clk.h>
+
+#define DEFAULT_TIMEOUT 30
+
+/* Watchdog Timer Registers */
+#define WTCSR 0
+#define WTCSR_MAGIC 0xA500
+#define WTSCR_WT (1<<6)
+#define WTSCR_TME (1<<5)
BIT()
+#define WTSCR_CKS(i) i
(i)
+
+#define WTCNT 2
+#define WTCNT_MAGIC 0x5A00
+
+#define WRCSR 4
+#define WRCSR_MAGIC 0x5A00
+#define WRCSR_RSTE (1<<6)
BIT()
+#define WRCSR_CLEAR_WOVF 0xA500 /* special value */
Please use
#define SOMETHING<tab>value
throughout and make sure value is aligned.
+
+struct rza_wdt {
+ struct watchdog_device wdev;
+ void __iomem *base;
+ struct clk *clk;
+};
+
+static int rza_wdt_start(struct watchdog_device *wdev)
+{
+ struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+ /* Stop timer */
+ writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
+
+ /* Must dummy read WRCSR:WOVF at least once before clearing */
+ readb(priv->base + WRCSR);
+ writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR);
+
+ /*
+ * Start timer with slowest clock source and reset option enabled.
+ */
+ writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR);
+ writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
+ writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME | WTSCR_CKS(7),
+ priv->base + WTCSR);
+
+ return 0;
+}
+
+static int rza_wdt_stop(struct watchdog_device *wdev)
+{
+ struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+ writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
+
+ return 0;
+}
+
+static int rza_wdt_ping(struct watchdog_device *wdev)
+{
+ struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+ writew(WTCNT_MAGIC | 0, priv->base + WTCNT);
+
+ return 0;
+}
+
+static int rza_wdt_restart(struct watchdog_device *wdev, unsigned long action,
+ void *data)
+{
+ struct rza_wdt *priv = watchdog_get_drvdata(wdev);
+
+ /* Stop timer */
+ writew(WTCSR_MAGIC | 0, priv->base + WTCSR);
+
+ /* Must dummy read WRCSR:WOVF at least once before clearing */
+ readb(priv->base + WRCSR);
+ writew(WRCSR_CLEAR_WOVF, priv->base + WRCSR);
+
+ /*
+ * Start timer with fastest clock source and only 1 clock left before
+ * overflow with reset option enabled.
+ */
+ writew(WRCSR_MAGIC | WRCSR_RSTE, priv->base + WRCSR);
+ writew(WTCNT_MAGIC | 255, priv->base + WTCNT);
+ writew(WTCSR_MAGIC | WTSCR_WT | WTSCR_TME, priv->base + WTCSR);
+
+ /*
+ * Actually make sure the above sequence hits hardware before sleeping.
+ */
+ wmb();
+
+ /* Wait for WDT overflow (reset) */
+ udelay(20);
+
+ return 0;
+}
+
+static const struct watchdog_info rza_wdt_ident = {
+ .options = WDIOF_MAGICCLOSE | WDIOF_KEEPALIVEPING | WDIOF_SETTIMEOUT,
+ .identity = "Renesas RZ/A WDT Watchdog",
+};
+
+static const struct watchdog_ops rza_wdt_ops = {
+ .owner = THIS_MODULE,
+ .start = rza_wdt_start,
+ .stop = rza_wdt_stop,
+ .ping = rza_wdt_ping,
+ .restart = rza_wdt_restart,
+};
+
+static int rza_wdt_probe(struct platform_device *pdev)
+{
+ struct rza_wdt *priv;
+ struct resource *res;
+ unsigned long rate;
+ int ret;
+
+ priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ priv->base = devm_ioremap_resource(&pdev->dev, res);
+ if (IS_ERR(priv->base))
+ return PTR_ERR(priv->base);
+
+ priv->clk = devm_clk_get(&pdev->dev, NULL);
+ if (IS_ERR(priv->clk))
+ return PTR_ERR(priv->clk);
+
+ rate = clk_get_rate(priv->clk);
+ if (!rate)
+ return -ENOENT;
+
+ /* Assume slowest clock rate possible (CKS=7) */
+ rate /= 16384;
+
The rate check should probably be here to avoid situations where rate < 16384.
+ priv->wdev.info = &rza_wdt_ident,
+ priv->wdev.ops = &rza_wdt_ops,
+ priv->wdev.parent = &pdev->dev;
+
+ /*
+ * Since the max possible timeout of our 8-bit count register is less
+ * than a second, we must use max_hw_heartbeat_ms.
+ */
+ priv->wdev.max_hw_heartbeat_ms = (1000 * U8_MAX)/rate;
space before and after /
+ dev_info(&pdev->dev, "max hw timeout of %dms\n",
+ priv->wdev.max_hw_heartbeat_ms);
dev_dbg ?
+
+ priv->wdev.min_timeout = 1;
+ priv->wdev.timeout = DEFAULT_TIMEOUT;
+
Add watchdog_init_timeout(&priv->wdev, 0, &pdev->dev); to optionally get the timeout from dt ?
+ platform_set_drvdata(pdev, priv);
+ watchdog_set_drvdata(&priv->wdev, priv);
+
+ ret = watchdog_register_device(&priv->wdev);
devm_watchdog_register_device()
+ if (ret < 0)
+ return ret;
+
+ return 0;
+}
+
+static int rza_wdt_remove(struct platform_device *pdev)
+{
+ struct rza_wdt *priv = platform_get_drvdata(pdev);
+
+ watchdog_unregister_device(&priv->wdev);
+ iounmap(priv->base);
iounmap is unnecessary (and wrong).
+ return 0;
+}
+
+static const struct of_device_id rza_wdt_of_match[] = {
+ { .compatible = "renesas,rza-wdt", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, rza_wdt_of_match);
+
+static struct platform_driver rza_wdt_driver = {
+ .probe = rza_wdt_probe,
+ .remove = rza_wdt_remove,
+ .driver = {
+ .name = "rza_wdt",
+ .of_match_table = rza_wdt_of_match,
+ },
+};
+
+module_platform_driver(rza_wdt_driver);
+
+MODULE_DESCRIPTION("Renesas RZ/A WDT Driver");
+MODULE_AUTHOR("Chris Brandt <chris.brandt@xxxxxxxxxxx>");
+MODULE_LICENSE("GPL v2");
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
