Re: [linux-sunxi] Re: [PATCH 2/4] clk: sunxi-ng: Add sun7i-a20 CCU driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Tue, 2017-02-28 at 09:21 +0100, Maxime Ripard wrote:
> Hi,
> 
> On Mon, Feb 27, 2017 at 11:09:12PM +0200, Priit Laes wrote:
> > Introduce a clock controller driver for sun7i A20 SoC.
> > 
> > > > Signed-off-by: Priit Laes <plaes@xxxxxxxxx>
> > ---
> >  drivers/clk/sunxi-ng/Kconfig         |   11 +
> >  drivers/clk/sunxi-ng/Makefile        |    1 +
> >  drivers/clk/sunxi-ng/ccu-sun7i-a20.c | 1068 ++++++++++++++++++++++++++++++++++
> >  drivers/clk/sunxi-ng/ccu-sun7i-a20.h |  121 ++++
> >  4 files changed, 1201 insertions(+)
> >  create mode 100644 drivers/clk/sunxi-ng/ccu-sun7i-a20.c
> >  create mode 100644 drivers/clk/sunxi-ng/ccu-sun7i-a20.h
> > 
> > diff --git a/drivers/clk/sunxi-ng/Kconfig b/drivers/clk/sunxi-ng/Kconfig
> > index 695bbf9..4f436ab 100644
> > --- a/drivers/clk/sunxi-ng/Kconfig
> > +++ b/drivers/clk/sunxi-ng/Kconfig
> > @@ -85,6 +85,17 @@ config SUN6I_A31_CCU
> > > >  	select SUNXI_CCU_PHASE
> > > >  	default MACH_SUN6I
> >  
> > +config SUN7I_A20_CCU
> > > > +	bool "Support for the Allwinner A20 CCU"
> > > > +	select SUNXI_CCU_DIV
> > > > +	select SUNXI_CCU_MULT
> > > > +	select SUNXI_CCU_NK
> > > > +	select SUNXI_CCU_NKM
> > > > +	select SUNXI_CCU_NM
> > > > +	select SUNXI_CCU_MP
> > > > +	select SUNXI_CCU_PHASE
> > > > +	default MACH_SUN7I
> > +
> >  config SUN8I_A23_CCU
> > > >  	bool "Support for the Allwinner A23 CCU"
> > > >  	select SUNXI_CCU_DIV
> > diff --git a/drivers/clk/sunxi-ng/Makefile b/drivers/clk/sunxi-ng/Makefile
> > index 6feaac0..bedda5b 100644
> > --- a/drivers/clk/sunxi-ng/Makefile
> > +++ b/drivers/clk/sunxi-ng/Makefile
> > > > @@ -21,6 +21,7 @@ obj-$(CONFIG_SUNXI_CCU_MP)	+= ccu_mp.o
> > > >  obj-$(CONFIG_SUN50I_A64_CCU)	+= ccu-sun50i-a64.o
> > > >  obj-$(CONFIG_SUN5I_CCU)		+= ccu-sun5i.o
> > > >  obj-$(CONFIG_SUN6I_A31_CCU)	+= ccu-sun6i-a31.o
> > > > +obj-$(CONFIG_SUN7I_A20_CCU)	+= ccu-sun7i-a20.o
> > > >  obj-$(CONFIG_SUN8I_A23_CCU)	+= ccu-sun8i-a23.o
> > > >  obj-$(CONFIG_SUN8I_A33_CCU)	+= ccu-sun8i-a33.o
> > > >  obj-$(CONFIG_SUN8I_H3_CCU)	+= ccu-sun8i-h3.o
> > diff --git a/drivers/clk/sunxi-ng/ccu-sun7i-a20.c b/drivers/clk/sunxi-ng/ccu-sun7i-a20.c
> > new file mode 100644
> > index 0000000..90d2f13
> > --- /dev/null
> > +++ b/drivers/clk/sunxi-ng/ccu-sun7i-a20.c
> > @@ -0,0 +1,1068 @@
> > +/*
> > + * Copyright (c) 2017 Priit Laes. All rights reserved.
> > + *
> > + * This software is licensed under the terms of the GNU General Public
> > + * License version 2, as published by the Free Software Foundation, and
> > + * may be copied, distributed, and modified under those terms.
> > + *
> > + * This program is distributed in the hope that it will be useful,
> > + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
> > + * GNU General Public License for more details.
> > + */
> > +
> > +#include <linux/clk-provider.h>
> > +#include <linux/of_address.h>
> > +
> > +#include "ccu_common.h"
> > +#include "ccu_reset.h"
> > +
> > +#include "ccu_div.h"
> > +#include "ccu_gate.h"
> > +#include "ccu_mp.h"
> > +#include "ccu_mult.h"
> > +#include "ccu_nk.h"
> > +#include "ccu_nkm.h"
> > +#include "ccu_nkmp.h"
> > +#include "ccu_nm.h"
> > +#include "ccu_phase.h"
> > +
> > +#include "ccu-sun7i-a20.h"
> > +
> > +/*
> > + * PLL1 - Core clock
> > + *
> > + * TODO: sigma-delta pattern bits 2 & 3
> > + * TODO: PLL1 tuning register
> 
> I don't think we need those TODO's at all, and these comments too. If
> the clock name is good enough (and it is), it's redundant.

Ok, will clean them up.

> 
> > + */
> > 
[...]
> > +};
> > +
> > +/* PLL2 - Audio clock */
> > +static struct ccu_nm pll_audio_base_clk = {
> > > > > > +	.enable		= BIT(31),
> > > > > > +	.n		= _SUNXI_CCU_MULT_OFFSET(8, 7, 0),
> > > > > > +	.m		= _SUNXI_CCU_DIV_OFFSET(0, 5, 0),
> > > > > > +	.common		= {
> > > > > > +		.reg		= 0x008,
> > > > > > +		.hw.init	= CLK_HW_INIT("pll-audio-base",
> > > > +					      "hosc",
> > > > +					      &ccu_nm_ops,
> > > > +					      0),
> > > > +	},
> > +
> > +};
> 
> You're forgetting the post-divider here

It's hardcoded to 4 during ccu initialization, similar to what is done
on the other SoCs (A13, A31..).

> 
> > +/* TODO: pll8 gpu 0x040 */
> 
> Please add all the clocks.

I'm not really comfortable adding clocks for blocks that currently lack
drivers.

> > +/* BIT(21 .. 31) - reserved */
> 
> I'm not sure we need those comments either.
> 
> > +/*
> > + * TODO: SATA clock also supports external clock as parent.
> > + * Currently we default to using PLL6 SATA gate.
> > + */
> 
> Which external clock? It should be modelled anyway. If we have a
> dependency on some other clock, it should be in our DT binding, and
> listed in the mux there.
> 
> Otherwise, the clock framework will not be able to deal with that mux
> being already set by the bootloader, and if we need to support that
> clock in the future, our binding will be ready for it.

I wish I knew which clock they're talking about..

User manuals (A10/A20) only specify following in the clock register
description:

BIT(24) - CLK_SRC_GATING, default 0x0
Clock Source Select:
0: PLL6 for SATA(100MHz)
1: External Clock

There's no section for SATA (called NC) in A10 manual, and in A20
manual only contains list of SATA/AHCI features.


> 
> > +static CLK_FIXED_FACTOR(pll_periph_2x_clk, "pll-periph-2x",
> > > > +			"pll-periph", 1, 2, CLK_SET_RATE_PARENT);
> > +/* We hardcode the divider to 4 for now */
> > +static CLK_FIXED_FACTOR(pll_audio_clk, "pll-audio",
> > > > +			"pll-audio-base", 4, 1, CLK_SET_RATE_PARENT);
> > +static CLK_FIXED_FACTOR(pll_audio_2x_clk, "pll-audio-2x",
> > > > +			"pll-audio-base", 2, 1, CLK_SET_RATE_PARENT);
> > +static CLK_FIXED_FACTOR(pll_audio_4x_clk, "pll-audio-4x",
> > > > +			"pll-audio-base", 1, 1, CLK_SET_RATE_PARENT);
> > +static CLK_FIXED_FACTOR(pll_audio_8x_clk, "pll-audio-8x",
> > > > +			"pll-audio-base", 1, 2, CLK_SET_RATE_PARENT);
> > +static CLK_FIXED_FACTOR(pll_video0_2x_clk, "pll-video0-2x",
> > > > +			"pll-video0", 1, 2, CLK_SET_RATE_PARENT);
> > +static CLK_FIXED_FACTOR(pll_video1_2x_clk, "pll-video1-2x",
> > +			"pll-video1", 1, 2, CLK_SET_RATE_PARENT);
> 
> It feels more natural to just have the clocks defined in the same
> order than their parents. So periph shouldn't be first

Ok, will move the periph clock after the video.

> > +static struct ccu_reset_map sun7i_a20_ccu_resets[] = {
> > +
> > > > > > +	[RST_USB_PHY0]		= { 0x0cc, BIT(0) },
> > > > > > +	[RST_USB_PHY1]		= { 0x0cc, BIT(1) },
> > > > > > +	[RST_USB_PHY2]		= { 0x0cc, BIT(2) },
> > > > > > +	[RST_DE_BE0]		= { 0x104, BIT(30) },
> > > > > > +	[RST_DE_BE1]		= { 0x108, BIT(30) },
> > > > > > +	[RST_DE_FE0]		= { 0x10c, BIT(30) },
> > > > > > +	[RST_DE_FE1]		= { 0x110, BIT(30) },
> > > > > > +	[RST_DE_MP]		= { 0x114, BIT(30) },
> > > > > > +	[RST_TCON0]		= { 0x118, BIT(30) },
> > > > > > +	[RST_TCON1]		= { 0x11c, BIT(30) },
> > > > > > +	[RST_CSI0]		= { 0x134, BIT(30) },
> > > > > > +	[RST_CSI1]		= { 0x138, BIT(30) },
> > > > > > +	[RST_VE]		= { 0x13c, BIT(0) },
> > > > > > +	[RST_ACE]		= { 0x148, BIT(16) },
> > > > > > +	[RST_LVDS]		= { 0x14c, BIT(0) },
> > > > > > +	[RST_GPU]		= { 0x154, BIT(30) },
> > > > > > +	[RST_HDMI_H]		= { 0x170, BIT(0) },
> > > > > > +	[RST_HDMI_SYS]		= { 0x170, BIT(1) },
> > > > > > +	[RST_HDMI_AUDIO_DMA]	= { 0x170, BIT(2) },
> > +};
> > +
> > +static const struct sunxi_ccu_desc sun7i_a20_ccu_desc = {
> > > > > > +	.ccu_clks	= sun7i_a20_ccu_clks,
> > > > > > +	.num_ccu_clks	= ARRAY_SIZE(sun7i_a20_ccu_clks),
> > +
> > > > > > +	.hw_clks	= &sun7i_a20_hw_clks,
> > +
> > > > > > +	.resets		= sun7i_a20_ccu_resets,
> > > > > > +	.num_resets	= ARRAY_SIZE(sun7i_a20_ccu_resets),
> > +};
> > +
> > +static void __init sun7i_a20_ccu_setup(struct device_node *node)
> > +{
> > > > +	void __iomem *reg;
> > > > +	u32 val;
> > +
> > > > +	reg = of_io_request_and_map(node, 0, of_node_full_name(node));
> > > > +	if (IS_ERR(reg)) {
> > > > +		pr_err("%s: Could not map the clock registers\n",
> > > > +		       of_node_full_name(node));
> > > > +		return;
> > > > +	}
> > +
> > +	#define SUN7I_PLL_AUDIO_REG	0x008
> 
> This should be defined above

Will do..
> 
> > +
> > > > +	/* Force the PLL-Audio-1x divider to 4 */
> > > > +	val = readl(reg + SUN7I_PLL_AUDIO_REG);
> > > > +	val &= ~GENMASK(19, 16);
> > > > +	writel(val | (3 << 16), reg + SUN7I_PLL_AUDIO_REG);
> > +
> > > > +	/*
> > > > +	 * Use PLL6 as parent for AHB
> > +	 * CPU/AXI clock changes rate when cpufreq is enabled
> 
> I'm not sure why that last sentence is needed too. A lot of clock
> listed there change rate when <some-feature> is enabled.

Will remove.

> 
> > +/* Some AHB gates are exported */
> > > > +#define CLK_AHB_BIST		31
> > > > +#define CLK_AHB_MS		36
> > > > +#define CLK_AHB_SDRAM		38
> > > > +#define CLK_AHB_ACE		39
> > > > +#define CLK_AHB_TS		41
> > > > +#define CLK_AHB_VE		48
> > > > +#define CLK_AHB_TVD		49
> > > > +#define CLK_AHB_TVE1		51
> > > > +#define CLK_AHB_LCD1		53
> > > > +#define CLK_AHB_CSI0		54
> > > > +#define CLK_AHB_CSI1		55
> > > > +#define CLK_AHB_HDMI0		56
> > > > +#define CLK_AHB_DE_BE1		59
> > > > +#define CLK_AHB_DE_FE0		60
> > > > +#define CLK_AHB_DE_FE1		61
> > > > +#define CLK_AHB_MP		63
> > > > +#define CLK_AHB_GPU		64
> > +
> > +/* Some APB0 gates are exported */
> > > > +#define CLK_APB0_AC97		67
> > > > +#define CLK_APB0_KEYPAD		74
> > +
> > +/* Some APB1 gates are exported */
> > > > +#define CLK_APB1_CAN		79
> > > > +#define CLK_APB1_SCR		80
> > +
> > +/* Some IP module clocks are exported */
> > > > +#define CLK_MS			93
> > > > +#define CLK_TS			106
> > > > +#define CLK_PATA		111
> > > > +#define CLK_AC97		115
> > > > +#define CLK_KEYPAD		117
> > > > +#define CLK_SATA		118
> > +
> > +/* Some DRAM gates are exported */
> > > > +#define CLK_DRAM_VE		125
> > > > +#define CLK_DRAM_CSI0		126
> > > > +#define CLK_DRAM_CSI1		127
> > > > +#define CLK_DRAM_TS		128
> > > > +#define CLK_DRAM_TVD		129
> > > > +#define CLK_DRAM_TVE1		131
> > > > +#define CLK_DRAM_OUT		132
> > > > +#define CLK_DRAM_DE_FE1		133
> > > > +#define CLK_DRAM_DE_FE0		134
> > > > +#define CLK_DRAM_DE_BE1		136
> > > > +#define CLK_DRAM_MP		137
> > > > +#define CLK_DRAM_ACE		138
> > +
> > > > +#define CLK_DE_BE1		140
> > > > +#define CLK_DE_FE0		141
> > > > +#define CLK_DE_FE1		142
> > > > +#define CLK_DE_MP		143
> > > > +#define CLK_TCON1_CH0		145
> > > > +#define CLK_CSI_SPECIAL		146
> > > > +#define CLK_TVD			147
> > > > +#define CLK_TCON0_CH1_SCLK2	148
> > > > +#define CLK_TCON1_CH1_SCLK2	150
> > > > +#define CLK_TCON1_CH1		151
> > > > +#define CLK_CSI0		152
> > > > +#define CLK_CSI1		153
> > > > +#define CLK_VE			154
> > > > +#define CLK_AVS			156
> > > > +#define CLK_ACE			157
> > > > +#define CLK_HDMI		158
> > > > +#define CLK_GPU			159
> > > > +#define CLK_MBUS		160
> > > > +#define CLK_HDMI1_SLOW		161
> > > > +#define CLK_HDMI1_REPEAT	162
> > > > +#define CLK_OUT_A		163
> > +#define CLK_OUT_B		164
> 
> Is there a reason not to expose these clocks?

I exposed them on need to have basis. And basically did one-to-one
conversion from devicetree.

Päikest,
Priit
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux