On Thu, Dec 19, 2013 at 04:07:24PM -0500, Anson Huang wrote: > This patch adds support for imx6qdl-sabresd board's power > key, the key is named "SW1" on board, press it can wake up > system from suspend. > > Add a new pinctrl entry for gpio keys and move all gpio > keys pin to this entry. > > Signed-off-by: Anson Huang <b20788@xxxxxxxxxxxxx> There are a couple of minor things below. Nothing major, so I just fixed them up and applied the patch. > --- > arch/arm/boot/dts/imx6qdl-sabresd.dtsi | 26 ++++++++++++++++++++++---- > 1 file changed, 22 insertions(+), 4 deletions(-) > > diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > index e75e11b..b545895 100644 > --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi > @@ -10,6 +10,7 @@ > * http://www.gnu.org/copyleft/gpl.html > */ > > +#include <dt-bindings/input/input.h> Have a blank line here. > / { > memory { > reg = <0x10000000 0x40000000>; > @@ -46,19 +47,28 @@ > > gpio-keys { > compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpio_keys>; > + > + power { > + label = "Power Button"; > + gpios = <&gpio3 29 0>; > + gpio-key,wakeup; > + linux,code = <KEY_POWER>; > + }; > > volume-up { > label = "Volume Up"; > gpios = <&gpio1 4 0>; > gpio-key,wakeup; > - linux,code = <115>; /* KEY_VOLUMEUP */ > + linux,code = <KEY_VOLUMEUP>; > }; > > volume-down { > label = "Volume Down"; > gpios = <&gpio1 5 0>; > gpio-key,wakeup; > - linux,code = <114>; /* KEY_VOLUMEDOWN */ > + linux,code = <KEY_VOLUMEDOWN>; > }; > }; > > @@ -171,8 +181,6 @@ > hog { > pinctrl_hog: hoggrp { > fsl,pins = < > - MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 > - MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 > MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x80000000 > MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x80000000 > MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x80000000 > @@ -185,6 +193,16 @@ > >; > }; > }; > + > + gpio-keys { We now use one pinctrl container 'imx6qdl-sabresd' for all pinctrl groups, so we can move pinctrl_gpio_keys into above and save this gpio-keys container. Shawn > + pinctrl_gpio_keys: gpio_keysgrp { > + fsl,pins = < > + MX6QDL_PAD_EIM_D29__GPIO3_IO29 0x80000000 > + MX6QDL_PAD_GPIO_4__GPIO1_IO04 0x80000000 > + MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x80000000 > + >; > + }; > + }; > }; > > &ldb { > -- > 1.7.9.5 > > -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html