UART0/1/4/6 interrupts are guesses.
Cc: 96boards@xxxxxxxxxxxxxx
Signed-off-by: Andreas Färber <afaerber@xxxxxxx>
---
v2 -> v3:
* Added remaining UART nodes -- some interrupts are guesses
* Added timer node -- only TIMER1 interrupt known
v1 -> v2:
* Reworded subject
* Added memory@0 node for Bubblegum-96 (Mark)
* Filled in reserved-memory sub-node for Bubblegum-96 (Mark)
* Added arm-pmu interrupt-affinity property (Mark)
* Changed second GIC reg size 0x1000 -> 0x2000 for Bubblegum-96 (Mark)
* Updated ARCH_OWL to ARCH_ACTIONS (Arnd)
* Renamed s900-bubblegum96.dts to s900-bubblegum-96.dts
* Adopted "actions" vendor prefix
* Dropped irq.h include
* Adopted SPDX-License-Identifier (Rob)
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/actions/Makefile | 5 +
arch/arm64/boot/dts/actions/s900-bubblegum-96.dts | 35 +++++
arch/arm64/boot/dts/actions/s900.dtsi | 164 ++++++++++++++++++++++
4 files changed, 205 insertions(+)
create mode 100644 arch/arm64/boot/dts/actions/Makefile
create mode 100644 arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
create mode 100644 arch/arm64/boot/dts/actions/s900.dtsi
diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile
index 080232b..d1a6b0a 100644
--- a/arch/arm64/boot/dts/Makefile
+++ b/arch/arm64/boot/dts/Makefile
@@ -1,3 +1,4 @@
+dts-dirs += actions
dts-dirs += al
dts-dirs += allwinner
dts-dirs += altera
diff --git a/arch/arm64/boot/dts/actions/Makefile b/arch/arm64/boot/dts/actions/Makefile
new file mode 100644
index 0000000..62922d6
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/Makefile
@@ -0,0 +1,5 @@
+dtb-$(CONFIG_ARCH_ACTIONS) += s900-bubblegum-96.dtb
+
+always := $(dtb-y)
+subdir-y := $(dts-dirs)
+clean-files := *.dtb
diff --git a/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
new file mode 100644
index 0000000..a0c3484
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s900-bubblegum-96.dts
@@ -0,0 +1,35 @@
+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+/dts-v1/;
+
+#include "s900.dtsi"
+
+/ {
+ compatible = "ucrobotics,bubblegum-96", "actions,s900";
+ model = "Bubblegum-96";
+
+ aliases {
+ serial5 = &uart5;
+ };
+
+ chosen {
+ stdout-path = "serial5:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x80000000>;
+ };
+};
+
+&timer {
+ clocks = <&hosc>;
+};
+
+&uart5 {
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/actions/s900.dtsi b/arch/arm64/boot/dts/actions/s900.dtsi
new file mode 100644
index 0000000..6048651
--- /dev/null
+++ b/arch/arm64/boot/dts/actions/s900.dtsi
@@ -0,0 +1,164 @@
+/*
+ * Copyright (c) 2017 Andreas Färber
+ *
+ * SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "actions,s900";
+ interrupt-parent = <&gic>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus {
+ #address-cells = <2>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x0>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x1>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53", "arm,armv8";
+ reg = <0x0 0x3>;
+ enable-method = "psci";
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ secmon@1f000000 {
+ reg = <0x0 0x1f000000 0x0 0x1000000>;
+ no-map;
+ };
+ };
+
+ psci {
+ compatible = "arm,psci-0.2";
+ method = "smc";
+ };
+
+ arm-pmu {
+ compatible = "arm,cortex-a53-pmu";
+ interrupts = <GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-affinity = <&cpu0>, <&cpu1>, <&cpu2>, <&cpu3>;
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ };
+
+ hosc: hosc {
+ compatible = "fixed-clock";
+ clock-frequency = <24000000>;
+ #clock-cells = <0>;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ gic: interrupt-controller@e00f1000 {
+ compatible = "arm,gic-400";
+ reg = <0x0 0xe00f1000 0x0 0x1000>,
+ <0x0 0xe00f2000 0x0 0x2000>,
+ <0x0 0xe00f4000 0x0 0x2000>,
+ <0x0 0xe00f6000 0x0 0x2000>;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>;
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ };
+
+ uart0: serial@e0120000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0120000 0x0 0x2000>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart1: serial@e0122000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0122000 0x0 0x2000>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart2: serial@e0124000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0124000 0x0 0x2000>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart3: serial@e0126000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0126000 0x0 0x2000>;
+ interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart4: serial@e0128000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe0128000 0x0 0x2000>;
+ interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart5: serial@e012a000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe012a000 0x0 0x2000>;
+ interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ uart6: serial@e012c000 {
+ compatible = "actions,s900-uart", "actions,owl-uart";
+ reg = <0x0 0xe012c000 0x0 0x2000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
+ status = "disabled";
+ };
+
+ timer: timer@e0228000 {
+ compatible = "actions,s900-timer";
+ reg = <0x0 0xe0228000 0x0 0x8000>;
+ interrupts = <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "Timer1";
+ };
+ };
+};
--
2.10.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
