Re: [PATCH 0/4] OMAPDSS: DT support for N900 panel

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




* Sebastian Reichel <sre@xxxxxxxxxx> [131219 05:57]:
> On Thu, Dec 19, 2013 at 11:08:40AM +0100, Sebastian Reichel wrote:
> > > Are you able to check if the bootloader muxes dat3 to SDI mode?
> > 
> > The bootloader's source code is not available as far as i know.
> > 
> > [...], but I get an external abort on non-linefetch.
> > So I can't check it :(
> 
> Ok. This is fixed by applying [0] (Thanks for the hint, Tomi!).
> This is the mux configuration from the bootloader:
> 
> ...
> pin 96 (480020f0.0) 00000001 pinctrl-single     // sdi dat1n
> pin 97 (480020f2.0) 00000001 pinctrl-single     // sdi dat1p
> pin 98 (480020f4.0) 00000001 pinctrl-single     // sdi dat2n
> pin 99 (480020f6.0) 00000001 pinctrl-single     // sdi dat2p
> pin 100 (480020f8.0) 00000007 pinctrl-single    // sdi dat3n
> pin 101 (480020fa.0) 00000007 pinctrl-single    // sdi dat3p
> pin 102 (480020fc.0) 00000004 pinctrl-single 
> pin 103 (480020fe.0) 00000004 pinctrl-single 
> pin 104 (48002100.0) 00000004 pinctrl-single    // sdi vsync
> pin 105 (48002102.0) 00004104 pinctrl-single    // sdi hsync
> pin 106 (48002104.0) 00000004 pinctrl-single    // sdi den
> pin 107 (48002106.0) 00000004 pinctrl-single    // sdi stp
> pin 108 (48002108.0) 00000001 pinctrl-single    // sdi clkp
> pin 109 (4800210a.0) 00000001 pinctrl-single    // sdi clkn
> ...
> 
> I guess the following entry should be added to the omap3-n900.dts file:
> 
> 	dss_sdi_pins: pinmux_dss_sdi_pins {
> 		pinctrl-single,pins = <
> 			0x0c0 (PIN_OUTPUT | MUX_MODE1)   /* dss_data10.sdi_dat1n */
> 			0x0c2 (PIN_OUTPUT | MUX_MODE1)   /* dss_data11.sdi_dat1p */
> 			0x0c4 (PIN_OUTPUT | MUX_MODE1)   /* dss_data12.sdi_dat2n */
> 			0x0c6 (PIN_OUTPUT | MUX_MODE1)   /* dss_data13.sdi_dat2p */
> 			0x0d8 (PIN_OUTPUT | MUX_MODE1)   /* dss_data22.sdi_clkp */
> 			0x0da (PIN_OUTPUT | MUX_MODE1)   /* dss_data23.sdi_clkn */
> 		>;
> 	};
> 
> [0] https://patchwork.kernel.org/patch/3283781/

Do we need to update Laurent's patch with this? Or can we use it as
it is and maybe you can ack it?

Regards,

Tony
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux