On 17/12/2013 17:16, Boris BREZILLON : > Document the clock properties required by the at91 ADC driver. > > Signed-off-by: Boris BREZILLON <b.brezillon@xxxxxxxxxxx> Acked-by: Nicolas Ferre <nicolas.ferre@xxxxxxxxx> > --- > .../devicetree/bindings/arm/atmel-adc.txt | 5 +++++ > 1 file changed, 5 insertions(+) > > diff --git a/Documentation/devicetree/bindings/arm/atmel-adc.txt b/Documentation/devicetree/bindings/arm/atmel-adc.txt > index d106146..9a1175b 100644 > --- a/Documentation/devicetree/bindings/arm/atmel-adc.txt > +++ b/Documentation/devicetree/bindings/arm/atmel-adc.txt > @@ -5,6 +5,9 @@ Required properties: > <chip> can be "at91sam9260", "at91sam9g45" or "at91sam9x5" > - reg: Should contain ADC registers location and length > - interrupts: Should contain the IRQ line for the ADC > + - clock-names: tuple listing input clock names. > + Required elements: "adc_clk", "adc_op_clk". > + - clocks: phandles to input clocks. > - atmel,adc-channels-used: Bitmask of the channels muxed and enable for this > device > - atmel,adc-startup-time: Startup Time of the ADC in microseconds as > @@ -44,6 +47,8 @@ adc0: adc@fffb0000 { > compatible = "atmel,at91sam9260-adc"; > reg = <0xfffb0000 0x100>; > interrupts = <20 4>; > + clocks = <&adc_clk>, <&adc_op_clk>; > + clock-names = "adc_clk", "adc_op_clk"; > atmel,adc-channel-base = <0x30>; > atmel,adc-channels-used = <0xff>; > atmel,adc-drdy-mask = <0x10000>; > -- Nicolas Ferre -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html