Sorry, resending with a less broken subject line that doesn't talk
about anti-virus scanning failures. I almost ignored the original
email due to the crazy subject line.
So if you get this twice, don't worry. It's all the same thing, just
quoted and subject line cleaned up.
Linus
On Fri, Feb 24, 2017 at 11:15 AM, Linus Torvalds
<torvalds@xxxxxxxxxxxxxxxxxxxx> wrote:
> Added more relevant people. I've debugged the immediate problem below,
> but I think there's another problem that actually triggered this.
>
> On Fri, Feb 24, 2017 at 10:28 AM, kernel test robot
> <fengguang.wu@xxxxxxxxx> wrote:
>>
>> 0day kernel testing robot got the below dmesg and the first bad commit is
>>
>> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git master
>>
>> commit ff58d005cd10fcd372787cceac547e11cf706ff6
>> Merge: 5ab3566 9eeb0ed
>>
>> Merge tag 'media/v4.11-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
> [...]
>> [ 4.664940] rc rc0: lirc_dev: driver ir-lirc-codec (rc-loopback) registered at minor = 0
>> [ 4.666322] BUG: unable to handle kernel NULL pointer dereference at 0000039c
>> [ 4.666675] IP: serial_ir_irq_handler+0x189/0x410
>
> This merge being fingered ends up being a subtle interaction with other changes.
>
> Those "other changes" are (again) the interrupt retrigger code that
> was reverted for 4.10, and then we tried to merge them again this
> merge window.
>
> Because the immediate cause is:
>
>> [ 4.666675] EIP: serial_ir_irq_handler+0x189/0x410
>> [ 4.666675] Call Trace:
>> [ 4.666675] <IRQ>
>> [ 4.666675] __handle_irq_event_percpu+0x57/0x100
>> [ 4.666675] handle_irq_event_percpu+0x1d/0x50
>> [ 4.666675] handle_irq_event+0x32/0x60
>> [ 4.666675] handle_edge_irq+0xa5/0x120
>> [ 4.666675] handle_irq+0x9d/0xd0
>> [ 4.666675] </IRQ>
>> [ 4.666675] do_IRQ+0x5f/0x130
>> [ 4.666675] common_interrupt+0x33/0x38
>> [ 4.666675] EIP: hardware_init_port+0x3f/0x190
>> [ 4.666675] EFLAGS: 00200246 CPU: 0
>> [ 4.666675] EAX: c718990f EBX: 00000000 ECX: 00000000 EDX: 000003f9
>> [ 4.666675] ESI: 000003f9 EDI: 000003f8 EBP: c0065d98 ESP: c0065d84
>> [ 4.666675] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
>> [ 4.666675] serial_ir_probe+0xbb/0x300
>> [ 4.666675] platform_drv_probe+0x48/0xb0
> ...
>
> ie an interrupt came in immediately after the request_irq(), before
> all the data was properly set up, which then causes the interrupt
> handler to take a fault because it tries to access some field that
> hasn't even been set up yet.
>
> The code line is helpful, the faulting instruction is
>
> mov 0x39c(%rax),%eax <--- fault
> call ..
> mov someglobalvar,%edx
>
> which together with the supplied config file makes me able to match it
> up with the assembly generation around it:
>
> inb %dx, %al # tmp254, value
> andb $1, %al #, tmp255
> testb %al, %al # tmp255
> je .L233 #,
> .L215:
> movl serial_ir+8, %eax # serial_ir.rcdev, serial_ir.rcdev
> xorl %edx, %edx # _66->timeout
> movl 924(%eax), %eax # _66->timeout, _66->timeout
> call nsecs_to_jiffies #
> movl jiffies, %edx # jiffies, jiffies.33_70
> addl %eax, %edx # _69, tmp259
> movl $serial_ir+16, %eax #,
> call mod_timer #
> movl serial_ir+8, %eax # serial_ir.rcdev,
> call ir_raw_event_handle #
> movl $1, %eax #, <retval>
>
> so it's that "serial_ir.rcdev->timeout" access that faults. So this is
> the faulting source code:
>
> drivers/media/rc/serial_ir.c: 402
>
> mod_timer(&serial_ir.timeout_timer,
> jiffies + nsecs_to_jiffies(serial_ir.rcdev->timeout));
>
> ir_raw_event_handle(serial_ir.rcdev);
>
> return IRQ_HANDLED;
>
> and serial_ir.rcdev is NULL when ti tries to look up the timeout.
>
> That mod_timer() is new as of commit 2940c7e49775 ("[media] serial_ir:
> generate timeout") and *that* is the actual new bug.
>
> Looking at the code, that serial_ir.rcdev thing is initialized fairly
> late in serial_ir_init_module(), while the interrupt is allocated
> early in serial_ir_probe(), which is done _early_ in
> serial_ir_init_module():
>
> serial_ir_init_module -> serial_ir_init -> platform_driver_register ->
> serial_ir_probe -> devm_request_irq
>
> Mauro, Sean, please fix.
>
> Anyway, this is clearly a bug in the serial_ir code, but it is *also*
> once again clearly now being *triggered* due to the irq handling
> changes.
>
> I'm pretty sure that the thing that triggered this is once more commit
> a9b4f08770b4 ("x86/ioapic: Restore IO-APIC irq_chip retrigger
> callback") which seems to retrigger stale irqs that simply should not
> be retriggered.
>
> They aren't actually active any more, if they ever were.
>
> So that commit seems to act like a random CONFIG_DEBUG_SHIRQ. It's
> good for testing, but not good for actual users.
>
> I the local APIC retrigger just unconditionally resends that irq. But
> it's the core interrupt code that decides to retrigger it incorrectly
> for some reason.
>
> Why is IRQS_PENDING set for that thing? Something must have almost
> certainly set it, despite the irq not actually having ever been
> pending. Thomas?
>
> Linus
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
