Reviewed-by: Mikko Perttunen <mperttunen@xxxxxxxxxx>
On 22.02.2017 17:14, Peter De Schrijver wrote:
Return the actually achieved rate in cfg->output_rate rather than just the
requested rate. This is important to make clk_round_rate return the correct
result.
Signed-off-by: Peter De Schrijver <pdeschrijver@xxxxxxxxxx>
---
drivers/clk/tegra/clk-tegra210.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/tegra/clk-tegra210.c b/drivers/clk/tegra/clk-tegra210.c
index fe698d2..58d7f9c 100644
--- a/drivers/clk/tegra/clk-tegra210.c
+++ b/drivers/clk/tegra/clk-tegra210.c
@@ -1222,6 +1222,7 @@ static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
cfg->n = p_rate / cf;
cfg->sdm_data = 0;
+ cfg->output_rate = input_rate;
if (params->sdm_ctrl_reg) {
unsigned long rem = p_rate - cf * cfg->n;
/* If ssc is enabled SDM enabled as well, even for integer n */
@@ -1232,10 +1233,15 @@ static int tegra210_pll_fixed_mdiv_cfg(struct clk_hw *hw,
s -= PLL_SDM_COEFF / 2;
cfg->sdm_data = sdin_din_to_data(s);
}
+ cfg->output_rate *= cfg->n * PLL_SDM_COEFF + PLL_SDM_COEFF/2 +
+ sdin_data_to_din(cfg->sdm_data);
+ cfg->output_rate /= p * cfg->m * PLL_SDM_COEFF;
+ } else {
+ cfg->output_rate *= cfg->n;
+ cfg->output_rate /= p * cfg->m;
}
cfg->input_rate = input_rate;
- cfg->output_rate = rate;
return 0;
}
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
